FujiElectric Inverter FRN0037F2S-4C

Fuji Inverter FRN18.5LM1S-4C Elevator Inverter 18.5KW AC380V Three-Phase The FRENIC-LFT series, which is a special inverter for elevator traction machines, has a variety of features such as greatly reducing torque ripple compared to our company's conventional products, and is sure to be compatible with customers' systems.

Introduction: FujiElectric's SJ series of high-sensitivity contactors with low power consumption and high sensitivity (1.4W for 0G type, 2.4W for 1SG type) can directly drive a coil through the output from a PC transistor, with an operation indicator (06G type), and a built-in surge absorption function Product Picture Show: ...

FujiElectric High Performance Inverter SC-N2/G DC110V Control Coil Type: AC Control coil voltage: 110VDC Rated current: 40A Auxiliary contact: 2NO+2NC The company has always been customer-centric, the concept of creating value for customers, quality, service ...

Introduction: FujiElectric FRENIC-NewVP is a reliable model with pump control, high operability, and long-life design after installation, and complies with UL standards and CE directives Product Picture Show: Features: 1. Pump control, there are 3 kinds of pumps ...

Introduction: FujiElectric FVR-Micro series small-capacity general-purpose compact inverter, economical inverter with low initial cost and good effect. The small size is easy to operate and easy to wiring. Ideal for the performance of the transverse moving machine Product Picture Show: ...

Introduction: FujiElectric The new compact inverter FVR0.4AS1S-4C is simple, space-saving, and can be used for a variety of purposes Model: FVRO.4AS1S-4C Applicable motor rated power KW 0.4 Output: Rated voltage v: Same as the input voltage ( ...

Introduction: FujiElectric small-capacity IPM for air conditioners Features of the product: (1) Energy conservation by reducing power loss Equipped with the 6th generation V-series IGBT chips, it is energy-saving by reducing power loss at low loads (APF: Annual Energy Consumption ...

In the past, the energy-saving function of the inverter was to minimize the loss of the motor unit according to the load state. The newly developed E-certificate C-P series has been updated with a new focus to consider the inverter itself as one of the electrical products. It not only minimizes the loss of the motor, but also reduces the frequency conversion ...

Introduction: FujiElectric Uninterruptible Power Supply System UPS7000HX-T4C Series Product Features: Three-phase four-wire constant inverter power supply mode, with an efficiency of up to 96.5% AT-NPC*3 level (new three-level) conversion technology Adoption of RB-I...

Introduction: FujiElectric FRENIC-Ace, which supports inverter software customization as standard, simplifies the main circuit switchgear for safe stopping, extends maintenance intervals, and helps reduce operating costs Product Picture Show: Rich scalability ...

Fujifilm 90KW inverter FRN0168F2S-4C pump fan is suitable for upgrading and replacing F1S series The FRENIC-VP series is a frequency converter for fans and pumps designed for the Chinese market. This time, in order to enhance our competitiveness against local Chinese manufacturers and European manufacturers, we have carried out a redesign ...

Introduction: FujiElectric adopts Fuji Electric's original dynamic torque vectoring control method, which can achieve a starting torque of 200% at 0.5Hz. It has many convenient features including the self-tuning function. Small, fully enclosed protective structure (22KW), capacity range 0. ...

Introduction: FujiElectric FRENIC-VP series fan pump special inverter, energy-saving effect upgrade, simple structure, easy maintenance, simple operation. Network correspondence. Product Picture Show: Product features: The energy-saving effect has been upgraded again. Use with confidence ...

Introduction: FujiElectric Inverter FRN3.7E1S-4C is suitable for a variety of mechanical devices such as lateral conveyance machinery, fans, water pumps, centrifuges, and food machinery to meet various needs such as high performance, system support, energy saving, labor saving, and overall cost reduction. A wide variety of ...

Introduction: FujiElectric Super J-MOS series MOSFETs Features: The on-state resistance is reduced by 70% to achieve a high level of low loss. Combined with technology to reduce switching losses, the total component losses are reduced by 14%. Main uses: ...

F2S inverter for fans and pumps Voltage level: three-phase 380-415VAC Rated power: 18.5kW Rated current: 37A Degree of protection: IP20 Application Type: Fan Water Pump The company has always been customer-centric, the concept of creating value for customers, and winning the ...

Product parameters Brand: FUJI/Fujitsu Model: FVR3.7S1S-4C Product family: S1S Scope of application: general Number of phases of power supply: three phases Rated voltage: three-phase AC380V Applicable motor power: 3.7kW Power supply ...

Introduction: Fujifilm inverter new generation G1S series, can replace the original G11S series FRN45G1S-4C/FRN45G11S-4CX, PG vector control is suitable for the use of offset printing machines and other applications that require high-precision positioning control. Fuji Electric's unique dynamic torque control performance has been improved.

Introduction: FujiElectric Inverter FRN3.7E1S-4C is suitable for a variety of mechanical devices such as lateral conveyance machinery, fans, water pumps, centrifuges, and food machinery to meet various needs such as high performance, system support, energy saving, labor saving, and overall cost reduction. A wide variety of ...

Product parameters Brand: Fuji Electric Model: FVR0.2S1S-7C Product family: S1S DC power supply nature: voltage type Number of power phases: single phase Supply voltage: low voltage Control mode: voltage vector ...