Introduction: The Weidmuller W clamping frame measuring transmitter terminal block WTQ 6/1 EN, our test disconnect terminal blocks with tension-clamp connection and screw connection technology, allow you to create all the important conversion circuits for current, voltage and power in a safe and precise way.
Product parameters
version | Test-current terminal, Screw connection, 6 mm², 500 V, 41 A, none, dark beige | Order number | 1934790000 | type | WTQ 6/1 EN | GTIN (EAN) | 4032248592142 | quantity | 50 pc(s). |
deep | 47.5 mm | Depth (inches) | 1.87 inch | height | 65 mm | Height (inches) | 2.559 inch | width | 7.9 mm | Width (inches) | 0.311 inch | net weight | 20.927 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Installation: | Snap directly onto the rail | Open end | Closed | The number of the same terminals | 1 | Explosion-proof version | No |
Torque setting for DMS electric screwdriver | 3 | Strip length | 12 mm | Crimp range, maximum | 10 mm² | Crimp range, minimum | 0.5 mm² | Crimp the screws | M 3.5 | Maximum crimping area of conductor AWG | AWG 8 | Minimum crimping area of the conductor AWG | AWG 20 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 10 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 6 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 6 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 0.5 mm² | Wiring cross-sectional area, stranded wire, maximum | 10 mm² | Wiring cross-sectional area, stranded wires, minimum | 1.5 mm² | Maximum crimping area for flexible wires | 10 mm² | Minimum cross-sectional area of stranded conductors | 0.5 mm² | Measuring gauge according to 60 947-1 | A5 | Number of junctions | 2 | The type of join | Screw connection | Screwdriver edge size | 0.8 x 4.0mm | Connection direction | Horizontal line entry |
Maximum crimping area of conductor AWG | AWG 8 | Minimum crimping area of the conductor AWG | AWG 20 | guide rail | TS 35, TS 32 |
Rated cross-section | 6 mm² | Rated voltage | 500 V | Current rating | 41 A | Maximum current | 57 A | Volume resistivity according to IEC 60947-7-x | 0.78 mΩ | Rated surge voltage | 6 kV | Power losses are in accordance with IEC 60947-7-x | 1.31 W | Pollution level | 3 |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller W clamping frame measurement transmitter terminal block WTQ 6/1 EN products, if you are interested in Weidmuller terminal blocks, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience
|
More on that
|
Weidmuller W clamping wire frame feed-through terminal block WTD 6/1 rail TS35
Introduction: Weidmuller W crimping wire frame feed-through terminal block WTD 6/1
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Sharp...
|
|
Weidmuller A2C 2.5 /DT/FS BL Net weight 8.389g
Introduction: Weidmuller A2C uses the PUSH IN technology to connect the tension-clamp with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller S4C 2.5 PE Wiring Technology SNAP IN
Description: Weidmuller S4C 2.5 PE, grounding terminal, PUSH IN, 2.5 mm², green/yellow
Features:
Feed-through terminal blocks with protection function are electrical conductors for safety protection and are suitable for a wide range of applications.
|
|
Weidmuller ZDK 6S/NT net weight 24.04g
Introduction: The Weidmuller ZDK 6S/NT is a universal wiring system for all common conductor connection types. The flexibility of shrapnel wiring makes it a beneficial wiring option.
|
|
Weidmuller APGTB 4 2T PE 4C/2 53.5mm deep
Description: The Weidmuller APGTB 4 2T PE 4C/2 push-in tension chain connection with PUSH IN technology, the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures that the guide ...
|
|
Weidmuller ZDKB 2.5/1.5 stripping length 10 mm
Introduction: The Weidmuller ZDKB 2.5/1.5 is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring is a beneficial connection.
|
|
Weidmuller Z feed-through terminal block ZDU 1.5/3AN OR
Description: Weidmuller Z Tension Clamp Feed-Through Terminal Blocks ZDU 1.5/3AN OR
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller MAK 2.5 DB rated current 24 A
Description: The Weidmuller MAK 2.5 DB terminal block with clamping frame connection has a highly reliable and versatile design that simplifies planning and optimises operational safety. Klippon Connect is able to respond to a wide range of requirements.
|
|
Weidmuller terminal block A3C 16 PE stripping length 18 mm
Introduction: The Weidmuller terminal block A3C 16 PE is an in-line tension-clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller terminal block A2C 10 PE with a rated voltage of 1000 V
Introduction: The Weidmuller A2C 10 PE terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller APGTB 4 2T 4C/2 cross-section 4 mm²
Introduction: The Weidmuller APGTB 4 2T 4C/2 is a push-in tension chain connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures that the wire ...
|
|
Weidmuller S3C 2.5 DL BL Snap IN Terminal Block
Introduction: The Weidmuller S3C 2.5 DL BL terminal block uses SNAP IN wiring technology for intuitive and simple operation in the cabling of the control cabinet
Features:
Feed-through terminal blocks with protection function are electrical conductors used for safety protection, ...
|
|
Weidmuller APGTB 2.5 FT 2C/1 BL 20A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller terminal block A2C 4 PE with a width of 6.1 mm
Introduction: The Weidmuller A2C 4 PE is an in-line tension-clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller ZT 4/4AN/2 stripping length 12 mm
Introduction: The Weidmuller ZT 4/4AN/2 is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller ZDT 2.5/2 DU-PE with a width of 5.1 mm
Introduction: The Weidmuller ZDT 2.5/2 DU-PE is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Weidmuller terminal block A3C 2.5 DL BL
Description: Weidmuller terminal block A3C 2.5 DL BL, feed-through terminal, PUSH IN, 2.5 mm², 800 V, 24 A, blue
Features:
Feed-through terminal blocks with protection function are electrical conductors used for safety protection, ...
|
|
Weidmuller Terminal Block AFS 4 2C BK/BL current 6.3A
Description: The Weidmuller AFS 4 2C BK/BL push-in tension-clamp connection with PUSH IN technology reduces the time spent on cabling to a minimum. Direct insertion ensures that the wire ...
|
|
Weidmuller Feed-through terminal block SAKDU 35 with a rated current of 125A
Description: Weidmuller SAKDU 35 feed-through terminal block The transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The insulation, connection systems and terminal blocks are designed in such a way that they can help to differentiate the product.
|
|
ADT 2.5 2C W/O DTLV BL 2.5 mm²
Introduction: The Weidmuller ADT uses the PUSH IN technology to connect the dome with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Contact
working hours
