Introduction: Weidmuller W clamping frame feed-through terminal block WTR 2.5 OR
Product parameters
version | Test-current terminal, Screw connection, 2.5 mm², 500 V, 24 A, reversible, orange | Order number | 1878530000 | type | WTR 2.5 OR | GTIN (EAN) | 4032248491469 | quantity | 100 pc(s). |
deep | 48 mm | Depth (inches) | 1.89 inch | Depth (with DIN rail) | 49 mm | height | 60 mm | Height (inches) | 2.362 inch | width | 5.1 mm | Width (inches) | 0.201 inch | net weight | 8.04 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Installation: | Snap directly onto the rail | Open end | Right | Explosion-proof version | No |
Torque setting for DMS electric screwdriver | 1 | Strip length | 10 mm | Crimp range, maximum | 4 mm² | Crimp range, minimum | 0.05 mm² | Crimp the screws | M 2.5 | Maximum crimping area of conductor AWG | AWG 12 | Minimum crimping area of the conductor AWG | AWG 30 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 4 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 2.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 0.5 mm² | Wiring cross-sectional area, stranded wire, maximum | 4 mm² | Wiring cross-sectional area, stranded wires, minimum | 1.5 mm² | Maximum crimping area for flexible wires | 4 mm² | Maximum tightening torque | 0.8 Nm | Minimum cross-sectional area of stranded conductors | 0.5 mm² | Minimum tightening torque | 0.4 Nm | Measuring gauge according to 60 947-1 | A3 | Number of junctions | 2 | The type of join | Screw connection | Screwdriver edge size | 0.6 x 3.5 mm | Connection direction | Horizontal line entry |
Maximum crimping area of conductor AWG | AWG 12 | Minimum crimping area of the conductor AWG | AWG 30 | guide rail | TS 35 | standard | IEC 60947-7-1 |
Rated cross-section | 2.5 mm² | Rated voltage | 500 V | Current rating | 24 A | Maximum current | 24 A | standard | IEC 60947-7-1 | Volume resistivity according to IEC 60947-7-x | 1.33 mΩ | Rated surge voltage | 6 kV | Power losses are in accordance with IEC 60947-7-x | 0.77 W | Pollution level | 3 |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller W crimping frame feed-through terminal block WTR 2.5 OR products, if you are interested in Weidmuller terminal blocks, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience
|
More on that
|
Weidmuller A Push-in Ground Terminal Block A4C 2.5 BR with a rated current of 24A
Introduction: Weidmuller A Push-in Ground Terminal Block A4C 2.5 BR
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller APGTB 4 2T VL 4C/2 BL 4mm²
Introduction: The Weidmuller APGTB 4 2T VL 4C/2 BL push-in tension-clamp connection with PUSH IN technology reduces the time spent on wiring to a minimum. The way to insert directly ensures that ...
|
|
Weidmuller ADT 2.5 3C flexible conductor 2.5 mm²
Introduction: The Weidmuller ADT uses the PUSH IN technology to connect the dome with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ZDU 1.5/2X2AN net weight 6.49g
Introduction: The Weidmuller ZDU 1.5/2X2AN is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring is a beneficial connection.
|
|
Weidmuller ZDU 2.5/2X2AN/D+ 400V/1A
Introduction: The Weidmuller ZDU 2.5/2X2AN/D+ is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Weidmuller ZDLD 2.5-2N PE resistivity 1.33mΩ
Introduction: The Weidmuller ZDLD 2.5-2N PE is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Weidmuller terminal block A2T 2.5 EM1 D/0 Push-in
Introduction: The Weidmuller A2T terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller A2T terminal blocks with a nominal cross-section of 2.5 mm²
Description: The Weidmuller A2T uses the PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller WFF 70 has a rated current of 192A
Description: Weidmuller WFF 70, bolt screw terminal, feed-through terminal, rated cross-section: 70 mm², bolt connection
Product parameters
Our customer-centric service concept: a full range of services to seek a high ...
|
|
Weidmuller terminal block A2C 2.5 PE cross-section 2.5 mm²
Introduction: The Weidmuller A2C 2.5 PE terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures the high pull of the wire.
|
|
Weidmuller terminal block A2T 2.5 EM1 D/1/2 net weight 13.23g
Description: The Weidmuller A2T uses the PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller Z push-through terminal block ZDU 2.5 BL
Description: The Weidmuller Z push-through terminal block ZDU 2.5 BL, tension-clamp technology is a universal wiring system for all common conductor connection types. The flexibility makes shrapnel wiring a beneficial wiring option.
Products...
|
|
Weidmuller Z Tension-Clamp Feed-Through Terminal Block ZEI 16 BL Rail TS35
Description: Weidmuller Z Tension Clamp Feed-Through Terminal Block ZEI 16 BL
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller APGTB 2.5 2T FT-PE 4C/2
Introduction: The Weidmuller APGTB 2.5 2T FT-PE 4C/2 with PUSH IN technology reduces the time spent on wiring to a minimum. Direct insertion in the way indeed ...
|
|
Weidmuller ZT 4/2AN/1 rated current 32A
Introduction: The Weidmuller ZT 4/2AN/1 is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller Z tension-clamp feed-through terminal blocks ZDU 6/3AN with a rated current of 41A
Introduction: The Weidmuller Z feed-through terminal block ZDU 6/3AN, the dome marshalling technology is a universal wiring system for all common conductor connection types. The flexibility makes shrapnel wiring a beneficial wiring option.
Product References ...
|
|
Weidmuller Z tension-clamp feed-through terminal block ZDU 2.5/3AN OR
Description: Weidmuller Z push-through terminal block ZDU 2.5/3AN OR
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standard of service, and seek to do a good job in every service process.
|
|
Weidmuller APGTB 2.5 FT 3C/1 BL 20A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
APGTB 4 2T VL 4C/2 800V/32A
Introduction: The Weidmuller APGTB 4 2T VL 4C/2 is a push-in tension-clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. The direct insertion method ensures that the guide ...
|
|
Weidmuller ZPE 10 stripping length 18 mm
Introduction: The Weidmuller ZPE 10 terminal block uses the push-in tension-clamp connection of the tension-clamp technology, which is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
Contact
working hours
