Description: Weidmuller P Push-in mounting terminal block PNT 2.5/4 offers a complete system for building installations, with a 10×3 copper rail at its core, which also includes perfectly coordinated components: mounting terminal blocks, centerline terminal blocks, breakout terminals, and a large number of accessories such as busbars and busbar brackets.
Product parameters
version | Neutral terminal block, PUSH IN, 4 mm², 250 V, 32 A, blue | Order number | 1896360000 | type | PNT 2.5/4 | GTIN (EAN) | 4032248511471 | quantity | 50 pc(s). |
deep | 47.75 mm | Depth (inches) | 1.88 inch | Depth (with DIN rail) | 48.5 mm | height | 63.5 mm | Height (inches) | 2.5 inch | width | 5.1 mm | Width (inches) | 0.201 inch | net weight | 10.9 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Installation: | Snap directly onto the rail | Open end | Right | Explosion-proof version | No |
Strip length | 12 mm | Crimp range, maximum | 6 mm² | Crimp range, minimum | 0.08 mm² | Double-wire wire-end ferrule Maximum conductor cross-section | 1.5 mm² | Conductor connection cross-sectional area, single strand hard conductor, maximum | 6 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 4 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 2.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 0.5 mm² | Wiring cross-sectional area, multi-strand thin wire, maximum | 4 mm² | Maximum crimping area for flexible wires | 4 mm² | Minimum cross-sectional area of stranded conductors | 2.5 mm² | Measuring gauge according to 60 947-1 | A3 | Number of junctions | 1 | The type of join | PUSH IN | Screwdriver edge size | 3.0 x 0.5 mm |
guide rail | TS 35 | standard | IEC 60947-7-1 compliant |
Rated cross-section | 4 mm² | Rated voltage | 250 V | Current rating | 32 A | standard | IEC 60947-7-1 compliant | Volume resistivity according to IEC 60947-7-x | 1 mΩ | Rated surge voltage | 4 kV | Power losses are in accordance with IEC 60947-7-x | 1.02 W | Pollution level | 3 |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller P in-line mounting terminal block PNT 2.5/4 products, if you are interested in Weidmuller terminal blocks, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience
|
More on that
|
Weidmuller A Push-in Ground Terminal Block A2C 4 GN with a rated current of 32A
Introduction: Weidmuller A In-line Ground Terminal Block A2C 4 GN
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller ZSI 2.5/2 500AC cross-section 2.5 mm²
Introduction: The Weidmuller ZSI 2.5/2 500AC is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Weidmuller feed-through terminal block A2C 35 BL 35 mm²
Product Introduction: Feed-through Terminal Blocks Power FeedsOur wide range of W-series terminal blocks, as well as our main harness breakout terminals, are optimally designed to ensure both convenience and space savings, ensuring safe and convenient wiring at the power feed.
...
|
|
Weidmuller terminal block A4C 2.5 DL OR max. current 24A
Introduction: The Weidmuller terminal block A4C 2.5 DL OR uses SNAP IN wiring technology for intuitive and simple operation of the cabling of the control cabinet
Features:
Feed-through terminal blocks with protection function are electrical conductors used for safety protection, ...
|
|
The WTR 2.5 RT WTR 2.5 RT terminal is rated at 24A
Introduction: Weidmuller W clamping frame current test terminal WTR 2.5 RT
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller Z Tension-Clamp Feed-Through Terminal Block ZDU 1.5 BL Net weight 4.6g
Description: Weidmuller Z Tension Clamp Feed-Through Terminal Block ZDU 1.5 BL
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller A Push-in group terminal block AAP11 6 LO RD
Description: Weidmuller A Push-in block terminal block AAP11 6 LO RD
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller terminal block A3C 16 DL max. 76A
Description: Weidmuller terminal block A3C 16 DL, feed-through terminal, PUSH IN, 16 mm², 1000 V, dark beige
Features:
A feed-through terminal block with protection function is an electrical conductor for safety protection and is suitable for a wide range of ...
|
|
Weidmuller A4C 4 PE height 87.5 mm
Introduction: Weidmuller terminal block A4C 4 PE with PUSH IN technology for in-line tension chain connection, the innovative PUSH IN technology reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller terminal block A3C 2.5 PE size 0.6 x 3.5 mm
Introduction: The Weidmuller A3C 2.5 PE terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures the high pull of the wire.
|
|
Weidmuller A Push-in block terminal block AAP21 4 DT with a rated current of 20A
Introduction: Weidmuller A Push-in block terminal block AAP21 4 DT
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller W clamping frame feed-through terminal block WDK 10
Description: Weidmuller W clamping frame feed-through terminal block WDK 10
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Sharp...
|
|
Weidmuller APGTB 1.5 2T 4C/2 BL 17.5A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller Clamping frame feed-through terminal block SAKDU 16 BK rail TS35
Introduction: Weidmuller SAKDU 16 BK feed-through terminal block for wire frames, the transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The insulation, connection systems and terminal blocks are designed in such a way that they help the product achieve ...
|
|
Weidmuller Feed-through terminal block SAKDU 10 YE net weight 16.2g
Introduction: Weidmuller Clamping frame feed-through terminal block SAKDU 10 YE, the transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The insulation, connection systems and terminal blocks are designed in such a way that they help the product achieve ...
|
|
Weidmuller APGTB 2.5 FT 2C/1 BL 20A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ZDK 2.5/R/2 net weight 12.16g
Introduction: The Weidmuller ZDK 2.5/R/2 is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller S4C 2.5 DL Wiring technology SNAP IN
Description: The Weidmuller S4C 2.5 DL terminal block uses SNAP IN wiring technology for intuitive and simple operation in the cabling of the control cabinet
Features:
Feed-through terminal block with protection function is an electrical conductor for safety protection, suitable for ...
|
|
Weidmuller APGTB 4 FT 3C/1 BL net weight 7.64g
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller A2C 2.5 /DT/FS current 22A
Introduction: Weidmuller A2C uses the PUSH IN technology to connect the tension-clamp with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Contact
working hours
