Fujifilm inverter FRN37F1S-4C 37KW 380V
In the past, the energy-saving function of the inverter was to minimize the loss of the motor unit according to the load state.
The newly developed FE Jiang C-P series has updated its focus and considered the inverter itself as one of the electrical products. This not only minimizes the loss of the motor, but also minimizes the power consumption of the inverter (ideal for minimum power consumption).
As a result, the energy savings are again increased by several percentages.
On February 16, 2005, the Kyoto Agreement officially came into force, which is also the unavoidable responsibility of the Chinese government and Chinese enterprises.
External signals are used to operate, stop, and set the frequency
[Wiring Sequence]
(1) Wiring the main circuit.
[How to Operate]
(1) Running and stopping: Operate or stop through the key operation (key) of the operation panel.
(2) Frequency setting: Use the key to set the frequency.
Note 1) When connecting a DC reactor (DCR) (option), remove the short circuit between terminals P1-P(+) and connect them. For inverters over 75kW, the DCR is a standard accessory, so be sure to connect it.
Note 2) To protect wiring, install a recommended circuit breaker (MCCB) or residual current circuit breaker (ELCB) (with overcurrent protection function) on the input side (primary) of each inverter. Do not use circuit breakers above the recommended capacity.
Note 3) If you want to use the inverter to switch off the power supply, install the recommended electromagnetic contactor (MC) in addition to the MCCB or ELCB if necessary. When the coils of the MC and solenoid are installed near the inverter, be sure to use the surge absorber and take care to connect them in parallel.
Note 4) If you want the main circuit power supply of the inverter to be turned on, only the control circuit is running, and the inverter is in standby mode, please connect it here. It is only necessary to complete the wiring of the main circuit part, and the inverter can be operated without connecting the main terminals.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow!
In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
FujiElectric E2S Inverter FRN0085E2S-4C
FujiElectric E2S Inverter FRN0085E2S-4C
Voltage level: three-phase 380-415VAC
Rated power: 45kW
Rated current: 85A
Degree of protection: IP20
The company has always been customer-centric, creating value for customers, quality and service.
|
|
FujiElectric Inverter FRN90G1S-4C
Introduction: FujiElectric Dynamic Torque Vectoring is a drive control technology. The control system calculates the power required for the motor load at high speed, controls the voltage and current vectors, and maximizes the output torque of the motor. Using Fujifilm's original control method, it can ...
|
|
FujiElectric FC Series AC Contactors
Introduction: FujiElectric FC series AC contactors have an electrical life of 250,000 times and a mechanical life of 1 million times, which is suitable for civil machinery and light load places with low on-off frequency. The minimum operating voltage is 75% of the rated coil voltage. Various terminals are available depending on the application.
|
|
FujiElectric FRENIC-VP series fan water pump inverter
Introduction: FujiElectric FRENIC-VP series fan pump special inverter, energy-saving effect upgrade, simple structure, easy maintenance, simple operation. Network correspondence.
Product Picture Show:
Product features:
The energy-saving effect has been upgraded again. Use with confidence ...
|
|
FujiElectric inverter FRN37G1S-4C
Introduction: Fuji Inverter FRN37G1S-4C is a high-performance multi-function inverter developed by focusing on the essence of Fuji Electric's technology.
|
|
FujiElectric Inverter FRN22G1S-4C
Introduction: Fuji Inverter FRN37G1S-4C is a high-performance multi-function inverter developed by focusing on the essence of Fuji Electric's technology.
|
|
FujiElectric Inverter FRN2.2E1S-4C 4.4A
Introduction: FujiElectric Inverter FRN2.2E1S-4C is suitable for a variety of mechanical devices such as lateral conveyance machinery, fans, water pumps, centrifuges, and food machinery to meet various needs such as high performance, system support, energy saving, labor saving, and overall cost reduction. A wide variety of ...
|
|
FujiElectric inverter FRN11G1S-4C 380V 11KW
It has a function that is conducive to the work of speed commands
Pulse train input function is included as standard
Speed control commands can be issued by using an input pulse train (single-phase pulse + command symbol) such as a pulse generator.
A function to prevent items from slipping
In the process of carrying up and down, etc., the braking ...
|
|
FujiElectric FRENIC-Multi medium and low voltage inverters
Introduction: FujiElectric FRENIC-Multi Series Easy to operate, full of capacity, comprehensive protection of peripheral equipment, suitable for up and down transportation and horizontal transportation, rich network support, simple and substantial maintenance.
Product Picture Show:
Give birth...
|
|
FujiElectric F2S Fan Water Pump Inverter FRN0203F2S-4C
FujiElectric F2S Fan Water Pump Inverter FRN0203F2S-4C
Voltage level: three-phase 380-415VAC
Rated power: 110kW
Rated current: 203A
Protection level: IP00
Application Type: Fan Water Pump
The company has always been customer-centric, for ...
|
|
FujiElectric Inverter FRN280G1S-4C
Introduction: FujiElectric Dynamic Torque Vectoring is a drive control technology. The control system calculates the power required for the motor load at high speed, controls the voltage and current vectors, and maximizes the output torque of the motor. Using Fujifilm's original control method, it can ...
|
|
FujiElectric SC-E Series Small · Medium Capacity Contactors
Introduction: FujiElectric SC-E series small · medium capacity contactors
Product Introduction
1. Features
1. Miniaturized design
2. Adopt the latest anti-natural materials (meet the highest standard of UL94V-0)
3 ...
|
|
FujiElectric MS4 series time relays
Introduction: FujiElectric MS4 series time relays
Product Introduction
1. Features
1. The depth behind the panel is only 66.5 mm (11.4 mm shorter than our previous product)
2. The series includes a variety of action mode types: delayed turn-on type, with delayed ...
|
|
FujiElectric High-Performance Inverter FRN0105E2S-4C
Fuji Electric high-performance inverter FRN0105E2S-4C
Voltage level: three-phase 380-415VAC
Rated power: 55kW
Rated current: 105A
Degree of protection: IP20
The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.
|
|
FujiElectric Inverter FRN1.5C1S-7C
Fuji inverter FRN1.5C1S-7C single-phase 220V1.5KW
Easy operation and improved maintenance
●Operability
Continuation of the operability of the current C1. Equipped with a frequency potentiometer, the operation is the same as that of the previous model.
●The operation panel with SB socket is arranged
The operator panel with US socket is used as a ...
|
|
FujiElectric C2S Inverter FRN0004C2S-4C
It is suitable for a variety of mechanical devices such as transverse handling machinery, fans, water pumps, centrifuges, food machinery, etc
It meets various needs such as high performance, system compatibility, energy saving, labor saving, and overall cost reduction.
In addition to the 200V series (single-phase), the 400V series has also been ...
|
|
FujiElectric Inverter FRN0022E2S-4C replaces the old E1S series
FUJI FRN0022E2S-4C inverter three-phase 380V replaces the old E1S series
Fujifilm inverter, whose full name is "Fuji AC inverter governor", is one of the world's well-known inverter brands developed, produced and sold by Fuji Electric Co., Ltd., with a relatively high market share around the world. ...
|
|
FujiElectric Inverter FRN45G1S-4C Heavy Duty
Introduction: Fujifilm inverter new generation G1S series, can replace the original G11S series FRN45G1S-4C/FRN45G11S-4CX, PG vector control is suitable for the use of offset printing machines and other applications that require high-precision positioning control. Fuji Electric's unique dynamic torque control performance has been improved.
|
|
FujiElectric Inverter FVR2.2S1S-4C
Product parameters
Brand: Fuji Electric
Model: FVR2.2S1S-4C
Scope of application: packaging machinery and equipment
Product family: S1S
Rated voltage: three-phase AC380(V)
Applicable motor power: 2.2 (kW) KW
...
|
|
FujiElectric Inverter FRFNIC-MULTI Series E1S
Fujifilm's new inverter FRFNIC-MULTI series E1S G1S p1s servo drive motor
Rated current: 600A
Number of power phases: 3 phases
Rated voltage 600V
Applicable motor power: 0.2-350KW
The company has always been customer-centric, creating value for customers, ...
|
|
Contact
working hours
