Introduction: Germany Moore/murr single-phase safety transformer 6686343, MTS single-phase safety transformer is a device that isolates electrical components from the public grid, but supplies them in the same way. This allows for safe work on the electrical system with live electricity. An isolation transformer consists of two separate coils or a two-part coil. The coil is connected to the public power grid. It creates a magnetic field in the iron core. This magnetic field again induces the available voltage in the second coil. If both coils have the same winding, it is an isolation transformer of 230V to 230V. Fixation type is slot-fastening and snap-on on TH35 mounting rails (EN 60715)
Features:
MURR transformers are safe and reliable
Feature 1: Certification covering the global market Feature 2: Wide range of applications and flexibility Feature 3: Can be customized according to customer needs
MTS, MST, MET or MTL –
The right transformer can be found for every application
Different applications require different voltages, so transformers must be more flexible. And the transformer product line of Moore Electronics,
Giving you the flexibility you need! Whether isolating transformers, control transformers, or safety transformers – we have the right solution for every application.
Single-phase safety transformer
160 VA
Spring-loaded terminals
Insulation class T 40/B
Other voltage specifications need to be customized
Product parameters
input
Input voltage 230/400 V AC
Inrush current 6.1 A (230 V AC); 3.5 A (400 V AC)
Short-circuit current 9.5 A (230 V AC); 5.5 A (400 V AC)
Input current 0.82 A (230 V AC); 0.47 A (400 V AC)
Frequency 50... 60 Hz
output
Output voltage 24 V AC (SELV)
Output power 160 VA
General data
Mounting Waist hole or DIN-rail TH35 (EN 60715)
Temperature range -20 to +40 °C (storage temperature -40 to +80 °C)
Test insulation voltage 4 kV (prim./sec.)
Drilling Ø 4.8×8.4 mm
Installation dimensions A×B×C 86.5×84×4.8 mm
Dimensions H×W×D 101×96×106 mm
This article introduces 6686343 products Germany Moore/MURR single-phase safety transformer, if you are interested in Moore/MURR transformer, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy. Safety relay products, if you are interested in MURR/MURR relays, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
The Murr/Murr EMC suppressor module 26150 has a maximum power of 50W
Introduction: Moore/Murr EMC Suppressor Module 26150
Features:
24 V AC/DC
VDR
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 24... 24 V AC/DC
Maximum Power (W): 50 W (VA) ...
|
|
Moore/Murr MEF Power Interference Filter 10512 3×440V AC max
Description: Moore/Murr MEF power interference filter 10512, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting
Features:
Suitable for both single-phase and three-phase power supplies
Push...
|
|
Germany Moore/Murr output relay 52104 DIN-rail mounting
Introduction: Germany Moore/Murr output relay 52104, each system will contain different kinds of interface modules. Relay modules are often used to isolate two different levels of voltage. The control side is electrically isolated from the load side by means of a module, so that it cannot be broken down by fault voltages. These modules ...
|
|
Moore/Murr MEF Power Interference Filter 10533 250 × 90 × 100mm
Introduction: Moore/Murr MEF Power Interference Filter 10533, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting
Features:
Suitable for both single-phase and three-phase power supplies
Push...
|
|
Moore/Murr EMC Suppressor Module 3124269
Introduction: 3124269 of Moore/Murr EMC suppressor modules
Features:
24 V AC/DC
RC + LED
The plug gasket is removed during assembly, and other color LEDs can be customized
Pay attention to the pin arrangement (PE is located on the cable outlet side). 180 ° Rotation Product ...
|
|
Moore/Murr EMC Suppressor Module 26086
Introduction: Moore/Murr EMC Suppressor Module 26086
Features:
230 V AC/DC
VDR
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 110... 250 V AC/DC
Material: Flame retardant plastic Basis ...
|
|
Moore/Murr EMC Suppressor Module 26521
Introduction: Moore/Murr EMC Suppressor Module 26521
Features:
24 V AC/DC
diode
Product parameters
Input Voltage: 0... 30 V DC
Material: Flame retardant plastic according to (UL 94)
Damping factor: about 1.5× UN (amount ...
|
|
Moore/Murr MEF Power Interference Filter 10470 250VAC max
Description: Moore/Murr MEF power interference filter 10470, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting
Features:
Suitable for both single-phase and three-phase power supplies
Push...
|
|
Murr/Murr EMC Suppressor Module 26184 Maximum power 200W
Introduction: Moore/Murr EMC Suppressor Module 26184
Features:
230 V AC/DC
VDR
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 110... 300 V AC/DC
Material: Flame retardant plastic Basis ...
|
|
Moore/Murr EMC Suppressor Module 26187
Introduction: Moore/Murr EMC Suppressor Module 26187
Features:
230 V AC/DC
VDR
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 250... 250 V AC
Material: Flame retardant plastic According to (UL ...
|
|
Murr/Murr EMC Suppressor Module 23020 Size 41×41×41mm
Introduction: Moore/Murr EMC Suppressor Module 23020
Features:
3× 400 V AC
RC
PG9
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
For DIN- ...
|
|
The Murr/Murr NLS power supply 85400 has an output current of 0.5A
Introduction: The Moore/Murr NLS power supply 85400, these units are not only extremely reliable, but also very efficient due to their integrated backup power supply. At the same time, they do not require much space in the cabinet.
Features:
MTBF is about 1,000,000 hours
Integration...
|
|
Murr/Murr EMC Suppressor Module 20100 Maximum power 15W
Introduction: Moore/Murr EMC Suppressor Module 20100
Features:
48 V AC/DC
RC
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 12... 53 V AC/DC
Material: Flame retardant plastic According to (UL ...
|
|
Moore/Murr EMC Suppressor Module 26588
Introduction: Moore/Murr EMC Suppressor Module 26588
Features:
24...240 V DC
diode
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 12... 250 V DC
Material: Flame retardant plastic Basis ...
|
|
Moore/Murr EMC Suppressor Module 23015 Frequency 10... 400Hz
Introduction: Moore/Murr EMC Suppressor Module 23015
Features:
3× 400 V AC
VDR
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
Product parameters
Frequently...
|
|
Moore/Murr MEF Power Interference Filter 10510 3 mA max
Description: Moore/Murr MEF Power Supply Interference Filter 10510, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting
Features:
Suitable for both single-phase and three-phase power supplies
Push...
|
|
Moore/Murr EMC Suppressor Module 21202 28×8.6×32mm
Introduction: Moore/Murr EMC Suppressor Module 21202
Features:
230 V AC/DC
RC
Product parameters
Input voltage: 127... 250 V AC/DC
Dimensions H×W×D: 28×8.6×32 mm
Applicable contactors: 3 RH 1/1 ...
|
|
Moore/Murr filter 10532
Introduction: Moore/Murr filter 10532
Features:
Current: 16 A
1-order
Attenuation curves are available separately
Product parameters
description
Function Description Three-phase 1st/2nd order EMC filter MEF is suitable for 0.1... 30 MHz, and to the main ...
|
|
Moore/Murr EMC Suppressor Module 23164
Introduction: Moore/Murr EMC Suppressor Module 23164
Features:
3× 575 V AC
VDR
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
Product parameters
Frequently...
|
|
Murr/Murr Xelity 8TX Unmanaged Switch 58812 100Mbit
Summary: Unmanaged switches are ideal for any network where configuration or diagnostic capabilities are not critical. They are quick and easy to install and offer a variety of styles. The new XELITY switches are manufactured at the Murrelektronik headquarters in Auburnweiler. It is high quality, 100% tested and technical...
|
|