Introduction: Weidmuller SAKDU 10 BK feed-through terminal block for wire frames, the transmission of power, signals and data is a traditional requirement in electrical engineering and cabinet assembly. The way in which the insulation, connection systems and terminal blocks are designed are the ones that help to differentiate the products. Feed-through terminals are suitable for combining and/or connecting one or more conductors. They have monolayer or multilayer forms that are of the same potential or isolated from each other.
Product parameters
version | Feed-through terminal, Screw connection, 10 mm², 800 V, 57 A, black | Order number | 1371780000 | type | SAKDU 10 BK | GTIN (EAN) | 4050118173413 | quantity | 100 pc(s). | Local products | Only available in select countries |
deep | 46.35 mm | Depth (inches) | 1.825 inch | Depth (with DIN rail) | 47 mm | height | 45 mm | Height (inches) | 1.772 inch | width | 9.9 mm | Width (inches) | 0.39 inch | net weight | 16.2 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Strip length | 12 mm | Crimp range, maximum | 10 mm² | Crimp range, minimum | 1.5 mm² | Crimp the screws | M 4 | Maximum crimping area of conductor AWG | AWG 6 | Minimum crimping area of the conductor AWG | AWG 16 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 10 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 1.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 10 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 1.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 10 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 1.5 mm² | Wiring cross-sectional area, stranded wire, maximum | 10 mm² | Wiring cross-sectional area, stranded wires, minimum | 1.5 mm² | Maximum crimping area for flexible wires | 10 mm² | Maximum tightening torque | 1.6 Nm | Minimum cross-sectional area of stranded conductors | 1.5 mm² | Minimum tightening torque | 1.2 Nm | Measuring gauge according to 60 947-1 | B6 | Number of junctions | 2 | The type of join | Screw connection | Connection direction | Horizontal line entry |
Maximum crimping area of conductor AWG | AWG 6 | Minimum crimping area of the conductor AWG | AWG 16 | guide rail | TS 35 |
Rated cross-section | 10 mm² | Rated voltage | 800 V | Current rating | 57 A | Maximum current | 57 A | Volume resistivity according to IEC 60947-7-x | 0.56 mΩ | Rated surge voltage | 8 kV | Power losses are in accordance with IEC 60947-7-x | 1.82 W | Pollution level | 3 | Overvoltage rating | III |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller clamping wire frame feed-through terminal block SAKDU 10 BK products, if you are interested in Weidmuller terminal blocks, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience
|
More on that
|
Weidmuller terminal block A4C 6 DL has a rated current of 41A
Description: Weidmuller terminal block A4C 6 DL, feed-through terminal, PUSH IN, 6 mm², 800 V, 41 A, dark beige
Features:
Feed-through terminal blocks with protection function are electrical conductors for safety protection and are suitable for multi...
|
|
Weidmuller terminal block AAP11 6 LO GN/OR max. 41A
Description: Weidmuller AAP11 6 LO GN/OR, PUSH IN, 6 mm², 500 V, 41 A, green
Features:
Feed-through terminal blocks with protection function are electrical conductors for safety protection and are suitable for a wide range of applications.
|
|
Weidmuller W clamping frame grounding terminal block WPE 1.5/ZZ rail TS35
Introduction: Weidmuller W clamping frame grounding terminal block WPE 1.5/ZZ
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller terminal block A2C 4 PE with a width of 6.1 mm
Introduction: The Weidmuller A2C 4 PE is an in-line tension-clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller A2C 2.5 /DT/FS OR 24A
Introduction: Weidmuller A2C uses the PUSH IN technology to connect the tension-clamp with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ZDKB 2.5/1.5 stripping length 10 mm
Introduction: The Weidmuller ZDKB 2.5/1.5 is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring is a beneficial connection.
|
|
Weidmuller APGTB 2.5 FT 2C/1 BL 20A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller Crimp Wire Frame Feed-Through Terminal Block SAKDU 4/ZZ Rated current 32A
Introduction: The transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The insulation, connection systems and terminal blocks are designed in such a way that they help the product ...
|
|
Weidmuller terminal block A2T 2.5 PE stripping length 10 mm
Introduction: The Weidmuller A2T terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ZDTR 2.5 has a nominal cross-section of 2.5 mm²
Introduction: The Weidmuller ZDTR 2.5 is a universal wiring system for all common conductor connection types. The flexibility of shrapnel wiring makes it a beneficial wiring option.
|
|
The Weidmuller APGTB 1.5 FT 3C/1 net weight 4.7 g
Introduction: The Weidmuller A2T terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Germany Weidmuller/Weidmüller terminal block ZDU 2.5/2X2AN/D-
Introduction: Weidmuller ZDU 2.5/2X2AN/D - Push-in tension-clamp connection with tension-clamp technology, which is a universal wiring system for all common conductor connection types. The flexibility of shrapnel wiring makes it a beneficial wiring option.
|
|
Weidmuller APGTB 1.5 FT 2C/1 17.5A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller terminal block A4C 4 DL OR rated current 32A
Description: Weidmuller terminal block A4C 4 DL OR, feed-through terminal, PUSH IN, 4 mm², 32 A, orange
Features:
Feed-through terminal blocks with protection function are electrical conductors for safety protection and are suitable for a wide range of applications.
|
|
Weidmuller terminal block A3C 10 DL max. current 57A
Description: Weidmuller terminal block A3C 10 DL, feed-through terminal, PUSH IN, 10 mm², 1000 V, dark beige
Features:
A feed-through terminal block with protection function is an electrical conductor for safety protection and is suitable for a wide range of ...
|
|
Weidmuller ZDLD 2.5-2N stripping length 10 mm
Introduction: The Weidmuller ZDLD 2.5-2N is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller W clamping frame feed-through terminal block WDU 2.5N rated current 24A
Introduction: Weidmuller W clamping frame feed-through terminal block WDU 2.5N
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller S4C 2.5 DL Wiring technology SNAP IN
Description: The Weidmuller S4C 2.5 DL terminal block uses SNAP IN wiring technology for intuitive and simple operation in the cabling of the control cabinet
Features:
Feed-through terminal block with protection function is an electrical conductor for safety protection, suitable for ...
|
|
Weidmuller ZDU 6 has a nominal cross-section of 6 mm²
Introduction: The Weidmuller ZDU 6 terminal block uses a push-in tension-clamp connection with tension-clamp technology, which is a universal wiring system for all common conductor connection types. The flexibility makes shrapnel wiring a beneficial wiring option. ...
|
|
The Weidmuller W clamping frame modular terminal block WPO 4 has a rated voltage of 250V
Introduction: Weidmuller W Clamping Wire Frame Modular Terminal Block WPO 4
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Benefit...
|
|
Contact
working hours
