Weidmuller Feed-through terminal block SAKDU 4/ZR

About Weidmuller SAKDU 4/ZR Feed-through terminal blocks for wire frames, the transmission of power, signals and data is a traditional requirement in electrical engineering and cabinet assembly. The way in which the insulation, connection systems and terminal blocks are designed are the ones that help to differentiate the products. Feed-through terminals are suitable for combining and/or connecting one or more conductors. They have monolayer or multilayer forms that are of the same potential or isolated from each other.

Weidmuller Feed-through terminal block SAKDU 4/ZR

Product parameters

version	Feed-through terminal, 4 mm², 630 V, 32 A, grey
Order number	2018210000
type	SAKDU 4/ZR
GTIN (EAN)	4050118451146
quantity	50 pc(s).
Local products	Only available in select countries

Depth (with DIN rail)	48 mm
height	46 mm
Height (inches)	1.811 inch
width	6.1 mm
Width (inches)	0.24 inch
net weight	9.72 g

Storage temperature	-25 °C...55 °C
Minimum continuous operating temperature	-50 °C
Maximum continuous operating temperature	120 °C

Strip length	10 mm
Crimp range, maximum	6 mm²
Crimp range, minimum	0.5 mm²
Crimp the screws	M 3
Maximum crimping area of conductor AWG	AWG 10
Minimum crimping area of the conductor AWG	AWG 20
Conductor connection cross-sectional area, single strand hard conductor, maximum	6 mm²
Conductor connection cross-sectional area, single strand of hard conductor, minimum	0.5 mm²
Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max	4 mm²
Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum	0.5 mm²
Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max	4 mm²
Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum	0.5 mm²
Maximum crimping area for flexible wires	4 mm²
Maximum tightening torque	0.8 Nm
Minimum cross-sectional area of stranded conductors	0.5 mm²
Minimum tightening torque	0.5 Nm
Measuring gauge according to 60 947-1	A4
Number of junctions	3
Connection direction	Horizontal line entry

Maximum crimping area of conductor AWG	AWG 10
Minimum crimping area of the conductor AWG	AWG 20
guide rail	TS 35

Rated cross-section	4 mm²
Rated voltage	630 V
Current rating	32 A
Maximum current	32 A
Volume resistivity according to IEC 60947-7-x	1 mΩ
Rated surge voltage	8 kV
Power losses are in accordance with IEC 60947-7-x	1.02 W
Pollution level	3
Overvoltage rating	III

Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.

This article introduces the Weidmuller clamping wire frame feed-through terminal block SAKDU 4/ZR products, if you are interested in Weidmuller terminal blocks, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience

Weidmuller Feed-through terminal block SAKDU 4/ZR

Sections viewed

Contact

working hours