Schneider universal inverter ATV630U22N4 2.2kW

Introduction:ATV630U22N4 Motor power 2.2kW Universal inverter Wall-mounted, IP21, 380...480V, integrated EMC filter/dual DC reactor/advanced Chinese panel, standard load mode is suitable for applications with small overload (110%/120%), motor power should be less than or equal to the rated power of the inverter, heavy load mode is suitable for applications with large overload (150%), and the motor power should be less than or equal to the rated power of the inverter reduced by one gear.

Schneider/Schneider ATV630U22N4

Product parameters

Product series: ATV Yucheng series ATV600

Product type: Inverter

Applications: Process applications

The product is shortened by the name ATV630

Variable standard version

Product function asynchronous motor

Synchronous motors

EMC filter-integrated and 50 m*** long motor cables in accordance with EN/IEC 61800-3 Class C2

Integrated and 150 m*** long motor cables in accordance with EN/IEC 61800-3 C3 classification

IP protection class IP21 in accordance with IEC 61800-5-1

IP21 complies with IEC 60529

Degree of protection UL Type 1 in accordance with UL 508C

Cooling method: forced ventilation

Power supply frequency 50... 60 Hz - 5...5 %

Number of phases in the network: 3 phases

Rated supply voltage [US]380...480 V - 15...10 %

Motor power (kW)2.2 kW (standard load)

1.5 kW (Heavy Duty)

Motor power: 3 hp standard load

2 hp heavy load

Line current: 4.3 A in... Up to 380 V (standard load)

3.8 A in... Up to 480 V (standard load)

3.1 A in... up to 380 V (Heavy Load)

2.9 A in... Up to 480 V (Heavy Load)

Expected line Isc50 kA

Apparent power3.2 kVA in... Up to 480 V (standard load)

2.4 kVA in... Up to 480 V (Heavy Load)

Continuous output current 5.6 A in... Standard loads are applied at up to 4 kHz

4 A in... Applicable on 4 kHz for heavy loads

Large transient current 6 A at 60 s (heavy load)

6.2 A at 60 s (standard load)

Asynchronous motor control profile standard constant torque

Optimized torque mode

Standard variable torque

Synchronous motor control configuration mode: permanent magnet synchronous motor

　　Synchronous reluctance motor

Output Frequency 0.0001... 0.5 kHz

Inverter output frequency 0.1... 599 Hz

Rated switching frequency 4 kHz

Switching frequency 2... 12 kHz adjustable

4...12 kHz Yes

Safety function STO (Safe Torque Interrupt) SIL 3

Discrete input logic 16 preset speeds

Modbus TCP communication port protocol

Modbus serial

Ethernet

Tab card slot A: Communication module, Profibus DP V1

Card Slot A: Communication Module, Profinet

Card Slot A: Communication Module, DeviceNet

Card Slot A: Communication module, Modbus TCP/EtherNet/IP

Card Slot A: Communication module, CANopen daisy chain RJ45

Card Slot A: Communication Module, CANopen SUB-D 9

Card Slot A: Communication module, CANopen screw terminal strip

Card Slot A/Card Slot B: Digital and input I/O expansion modules

Card Slot A/Card Slot B: Relay output expansion module

Card Slot A: Communication Module, Ethernet IP/Modbus TCP/MD-Link

Communication Module, BACnet MS/TP

Communication module, Ethernet Powerlink

Supplemental information output voltage< = supply voltage

Permissible Temporary Boost Current 1.1 x In at 60 s (standard load)

1.5 x In 60 s (overload)

Motor slip compensation is automatic regardless of the load situation

adjustable

The law of permanent magnet synchronous motor is not applicable

Can be suppressed

Acceleration and deceleration tilt linear can be monotonic from 0.01... 9999S

DC injection is used for braking to stopping

Protection Type: Thermal Protection: Motor

Safe Torque Off: Motor

Motor phase off: motor

Thermal Protection: Actuated

Safe Torque Off: Drive

Overheating: Drive

Overcurrent between output phase and ground: Drive

Output Voltage Overload: Driven

Short Circuit Protection: Drive

Motor Phase Break: Drive

DC Bus Overvoltage: Driven

Line Power Overvoltage: Driven

Bus Supply Undervoltage: Drive

Bus power out of phase: Drive

Overdrive: Drive

Control circuit on braking: drive

Frequency resolution display unit: 0.1 Hz

Analog input: 0.012/50 Hz

Electrical connection control: Detachable screw terminal 0.5... 1.5 mm² AWG 20...AWG 16

Motor: Screw Termination 2.5... 6 mm² AWG 14...AWG 10

Line side: Screw terminations 2.5... 6 mm² AWG 14...AWG 10

Port type RJ45 (on remote graphics terminals) for Ethernet/Modbus TCP

RJ45 (on remote graphics terminal) is compatible with Modbus serial

Physical interface: 2-wire RS485 for Modbus serial

Transmission frame RTUs are available for Modbus serial

Transmission rate 10/100 Mbit/s IP / Modbus TCP for Ethernet

4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial

Switched mode half-duplex, full-duplex, auto-negotiated Ethernet/Modbus TCP

Data format 8 bits, configurable as even, odd or no parity Modbus serial is available

Polarization: No impedance, Modbus serial

Number of addresses: 1... 247 applies

The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.

This article introduces Schneider universal inverter ATV630U22N4 2.2kW products, if you are interested in Schneider inverter, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

Schneider universal inverter ATV630U22N4 2.2kW

Sections viewed

Contact

working hours