Introduction: The transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The way in which the insulation, connection systems and terminal blocks are designed are the ones that help to differentiate the products. Feed-through terminals are suitable for combining and/or connecting one or more conductors. They have monolayer or multilayer forms that are of the same potential or isolated from each other.
Product parameters
version | Feed through terminal with rated cross section 2.5mm² | Order number | 1485790000 | type | SAKDU 2.5N | GTIN (EAN) | 4050118316063 | quantity | 100 pc(s). | Local products | Only available in select countries |
deep | 40 mm | Depth (inches) | 1.575 inch | Depth (with DIN rail) | 41 mm | height | 44 mm | Height (inches) | 1.732 inch | width | 5.5 mm | Width (inches) | 0.217 inch | net weight | 5.5 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Installation: | Snap directly onto the rail |
Strip length | 10 mm | Crimp range, maximum | 2.5 mm² | Crimp range, minimum | 0.5 mm² | Crimp the screws | M 2.5 | Maximum crimping area of conductor AWG | AWG 12 | Minimum crimping area of the conductor AWG | AWG 20 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 2.5 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 2.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 2.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 0.5 mm² | Maximum crimping area for flexible wires | 2.5 mm² | Maximum tightening torque | 0.6 Nm | Minimum cross-sectional area of stranded conductors | 0.5 mm² | Minimum tightening torque | 0.4 Nm | Measuring gauge according to 60 947-1 | A3 | Number of junctions | 2 | The type of join | Screw connection | Connection direction | Horizontal line entry |
Rated cross-section | 2.5 mm² | Rated voltage | 800 V | Current rating | 24 A | Maximum current | 24 A | Volume resistivity according to IEC 60947-7-x | 1.33 mΩ | Rated surge voltage | 8 kV | Power losses are in accordance with IEC 60947-7-x | 0.77 mW | Pollution level | 3 | Overvoltage rating | III |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller SAKDU 2.5N crimping frame feed-through terminal block SAKDU products, if you are interested in Weidmuller terminal blocks, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience
|
More on that
|
Weidmuller Z feed-through terminal block ZDU 4-2/3AN OR
Description: Weidmuller Z Tension Clamp Feed-Through Terminal Blocks ZDU 4-2/3AN OR
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standard of service, and seek to do a good job in every service process.
|
|
Weidmuller APGTB 4 FT 4C/2 BL current 32A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
The Weidmuller W clamping wire frame switch-type terminal block WTR 2.5 has a rated current of 24A
Introduction: Weidmuller W clamping enclosure switch terminal block WTR 2.5
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Sharp...
|
|
Weidmuller ZDK 2.5/R/2 net weight 12.16g
Introduction: The Weidmuller ZDK 2.5/R/2 is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller W clamping frame grounding terminal block WPE 1.5/ZZ rail TS35
Introduction: Weidmuller W clamping frame grounding terminal block WPE 1.5/ZZ
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller terminal block A2C 4 PE with a width of 6.1 mm
Introduction: The Weidmuller A2C 4 PE is an in-line tension-clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller APGTB 1.5 FT 2C/1 BL 3.9g
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller Z Tension-Clamp Feed-Through Terminal Block ZDU 1.5 BL Net weight 4.6g
Description: Weidmuller Z Tension Clamp Feed-Through Terminal Block ZDU 1.5 BL
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller ZDK 1.5DU-PE net weight 12.4g
Introduction: The Weidmuller ZDK 1.5DU-PE is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring is a beneficial connection.
|
|
Weidmuller terminal block A3C 6 DL BL with a rated current of 41A
Description: Weidmuller terminal block A3C 6 DL BL, feed-through terminal, PUSH IN, 6 mm², 800 V, 41 A, blue
Features:
Feed-through terminal blocks with protection function are electrical conductors for safety protection and are suitable for ...
|
|
Weidmuller Crimp Wire Frame Feed-Through Terminal Block SAKDU 4/ZZ Rated current 32A
Introduction: The transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The insulation, connection systems and terminal blocks are designed in such a way that they help the product ...
|
|
Weidmuller Terminal Block AFS 4 2C BK/BL current 6.3A
Description: The Weidmuller AFS 4 2C BK/BL push-in tension-clamp connection with PUSH IN technology reduces the time spent on cabling to a minimum. Direct insertion ensures that the wire ...
|
|
Weidmuller A Push-in block terminal block AAP21 4 DT with a rated current of 20A
Introduction: Weidmuller A Push-in block terminal block AAP21 4 DT
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller APGTB 2.5 FT 3C/1 BL 20A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller terminal block A2T 2.5 EM2 D/0 voltage 24 V
Description: The Weidmuller A2T uses the PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller terminal block A2C 10 DL BL rated voltage 1000V
Description: Weidmuller terminal block A2C 10 DL BL, feed-through terminal, PUSH IN, 10 mm², 1000 V, blue
Features:
Feed-through terminal blocks with protection function are electrical conductors for safety protection and are suitable for ...
|
|
Germany Weidmuller/Weidmüller terminal block ZSI 2.5-2/2X2AN/G25
Introduction: The Weidmuller ZSI 2.5-2/2X2AN/G25 is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel makes it a great option for the wiring of the shrapnel.
|
|
Weidmuller terminal block A3C 2.5 DL BL
Description: Weidmuller terminal block A3C 2.5 DL BL, feed-through terminal, PUSH IN, 2.5 mm², 800 V, 24 A, blue
Features:
Feed-through terminal blocks with protection function are electrical conductors used for safety protection, ...
|
|
Weidmuller ZDU 2.5/2X2AN/LD+ weighs 13.5g
Introduction: The Weidmuller ZDU 2.5/2X2AN/LD+ is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Weidmuller terminal block A2T 1.5 PE stripping length 8 mm
Introduction: The Weidmuller A2T 1.5 PE with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures the high pull of the wire.
|
|
Contact
working hours
