Mitsubishi PLC FX5UJ-60MT/ES AC100~240V

Introduction: Mitsubishi PLC FX5UJ-60MT/ES allows instantaneous power failure time to continue to operate for 10ms below the instantaneous power failure, the power supply voltage is AC200V or above, the input signal current X0 - X7 5.3mA/DC24V, X10 after 4.0mA/DC24V.

Mitsubishi Electric FX5UJ-60MT/ES

Product parameters

1. Power supply specifications

[Rated voltage] AC100——240V

[Voltage fluctuation range] -15%, +10%

[Rated frequency] 50/60Hz

[Instantaneous blackout time allowed] Operation will continue even in the event of a momentary blackout of less than 10 ms. The power supply voltage is AC200V or higher

The system time can be changed to 10-100ms through the user program.

[Power Fuse] 250V 3.15A delay fuse

[Inrush current] 30A max.: 5ms or less / AC100V max. 50A: 5ms or less / AC200V

[Power consumption*1] 35W

[DC24V supply power supply capacity*2] 400mA*3, 500mA*4

*1: This is the value at which the maximum DC24V supply power supply is consumed at the maximum configuration that can be connected to the CPU module (including the input loop current).

*2: The DC24V power supply is consumed when an I/O module is connected, and the current that can be used is reduced.

*3: The capacity of the CPU module input circuit when the power supply is supplied with 24V DC.

*4: The capacity of the CPU module input loop when an external power supply is used.

2. DC24V input (drain/source)

[input point] 36 points

[Connection type] Lock-and-untack terminal strip (M3 screw)

[Input Type] Drain/Source Type

[Input Signal Voltage] DC24V +20%、-15%

[Input Signal Current] X0 - X7 5.3mA/DC24V, X10 after 4.0mA/DC24V

[Input Impedance] [X0 - X7] 4.3 kΩ 5.6 kΩ after X10

[Input ON sensitivity current] X0 - X7 3.5mA or more, X10 and more than 3.0mA

[Input OFF sensitivity current] 1.5mA or less

[Enter Response Frequency]

. X0, X1, X3, X4: 100kHz (Please refer to the manual for reading pulses with a response frequency of 50k-100kHz.) )

　　. X2、X5、X6、X7：10kHz

[Pulse waveform]

. X0, X1, X3, X4: T1 (pulse width) 5 μs or more, T2 (rising/falling edge time) 2.5 μs or less

. X2, X5, X6, X7: T1 (pulse width) 50 μs or more, T2 (rising/falling edge time) 2.5 μs or less

[Input Response Time (H/W Filter Delay)]

. X0, X1, X3, and X4: 5 μs or less when ON and 5 μs or less when OFF

. X2, X5, X6, and X7: 30 μs or less when ON and 50 μs or less when OFF

. X10 - X17: 50 μs or less when ON, 150 μs or less when OFF

. X20 or later: Approx. 10 ms when ON and 10 ms when OFF

[Input response time (digital filter setting)]

. X10 - X17: None, 10/50μs, 0.1/0.2ms/0.4ms/0.6ms/1ms/5ms/10ms (initial)/20ms/70ms

When using in noisy environments, set the digital filter.

[Input Signal Type (Input Sensor Type)] No voltage contact input

Drain type: NPN open collector transistor Source type: PNP open collector transistor

[Input loop insulation] Optocoupler insulation

[Input Action Display] The LED lights up when ON is input

3. Transistor output

[number of output points] 24 points

[Connection type] Lock-and-untack terminal strip (M3 screw)

[Output Type] Transistor/Drain Output

[External Power Supply] DC5-30V

[Maximum load] 0.5A/1 point The total load current for each common terminal is shown below.

. Output 3 points/common side: 0.6A or less

. Output 4 points/common side: 0.8A or less

[Open Circuit Leakage Current] 0.1mA or less/DC30V

[Pressure drop on ON] Y0 - Y2 1.0V or less, Y3 and 1.5V below

[Response time] Y0 - Y2 2.5μs or less/10mA or more (DC5-24V), Y3 or less 0.2ms or less/200mA or more (DC24V)

[Output loop insulation] Optocoupler insulation

[Output Operation Display] The LED lights up when ON is output

[Dimensions: H*W*D] 90*175*83mm

[Weight] 0.85kg

The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.

This article introduces Mitsubishi PLC FX5UJ-60MT/ES AC100 - 240V products, if you are interested in Mitsubishi PLC, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

Mitsubishi PLC FX5UJ-60MT/ES AC100~240V

Sections viewed

Contact

working hours