IDEC/Izumi SE4D Safety Light Curtain SE9Z-SED-1-T

IoT-enabled safety relay modules Equipped with advanced diagnostics and outputs: predictive maintenance 高な診断と出力機能を买載:予知保保保 The switch dial connects a variety of input devices: set the start mode, set the function mode Lock settings and expand outputs At a glance ...

It is a dual signal monitoring function such as emergency stop switch and safety switch. Performance index e according to EN ISO 13849-1 and safety category 4. Built-in self-diagnostics to detect faults. Auto-reset or manual reset can be selected. The terminal block is a finger safety protection structure. ...

Even shaky doors can be locked reliably. The door can be locked/unlocked by turning the door handle. Key features: Smooth insertion and unplugging of shaky doors and actuators with single doors. The door can be locked/unlocked by turning the door handle. Standard locking for operator safety ...

The timed delay output corresponds to safety category 4 Key features: Compatible with PLe according to EN ISO 13849-1, safety category 4. A detachable terminal block with spring-loaded crimp terminals. The connector cover structure prevents contact defects. Width 45mm. ,3NO (i.e. broken) + 3NO (timing ...

主要特征 IoT化的安全继电器模块 搭载高级诊断与输出功能：预测性维护 高度な診断と出力機能を搭載：予知保全 切换拨盘连接多种输入设备：设定启动模式、设定功能模式 锁定设定、扩展输出 ...

A single unit can protect an area of 270° and 5 m long, so it can be used in a wide range of places, such as large-scale equipment using industrial robots and conveyor lines that continuously transmit long distances. The SE2L is a safety sensor that detects proximity. Simply set the outer area of the 2 protected areas ...

和泉 功率继电器 RJ1S-CL-D24 线圈电压 DC24V 触点数量 1C/O LED指示灯 带 触点材料： 银镍 保护等级： 1P40（封闭型） 接触电阻（初始值）*1： 50mQ以下 吸合时间*2： 15ms以下 释放时 ...

A single unit can protect an area of 270° and 5 m long, so it can be used in a wide range of places, such as large-scale equipment using industrial robots and conveyor lines that continuously transmit long distances. The SE2L is a safety sensor that detects proximity. Just on the outside of the 2 protected areas that are set ...

主要特征 IoT化的安全继电器模块 搭载高级诊断与输出功能：预测性维护 高度な診断と出力機能を搭載：予知保全 切换拨盘连接多种输入设备：设定启动模式、设定功能模式 锁定设定、扩展输出 ...

具备可简单更换模块的端子部卸装型。 搭载通过双重化安全电路的故障诊断功能。 内置可监视内置继电器动作的LED。 端子台为手指安全保护结构。 35mm宽DIN导轨安装型。 对应EN（欧洲标准）、I ...

A single unit can protect an area of 270° and 5 m long, so it can be used in a wide range of places, such as large-scale equipment using industrial robots and conveyor lines that continuously transmit long distances. The SE2L is a safety sensor that detects proximity. Simply set the outer area of the 2 protected areas ...

There is no need for redundant safety systems About the introduction of safety systems for low-risk machines. Until now, it has been difficult to achieve safety category 2 control, so low-risk machines are also subject to redundant (safety category 3) control. However, the HR5S safety relay module can be easily implemented to achieve safety ...

There is no need for redundant safety systems About the introduction of safety systems for low-risk machines. Until now, it has been difficult to achieve safety category 2 control, so low-risk machines are also subject to redundant (safety category 3) control. However, the HR5S safety relay module can be easily implemented to achieve safety ...

The position of the incident light is simple and clear, and the optical axis is easy to confirm the accuracy adjustment function. It is possible to construct efficient and economical safety measures without blind spots. The temporary neutralization feature enables both safety and productivity. The stowage restart function makes the production line smooth and safe after the temporary neutralization stop.

It is a dual signal monitoring function such as emergency stop switch and safety switch. Performance index e according to EN ISO 13849-1 and safety category 4. Built-in self-diagnostics to detect faults. Auto-reset or manual reset can be selected. The terminal block is a finger safety protection structure. ...

There is no need for redundant safety systems About the introduction of safety systems for low-risk machines. Until now, it has been difficult to achieve safety category 2 control, so low-risk machines are also subject to redundant (safety category 3) control. However, the HR5S safety relay module can be easily implemented to achieve safety ...

Safety Category 2 safety relay modules for use in low-risk machines Key features: There is no need for redundant safety systems About the introduction of safety systems for low-risk machines. Until now, it has been difficult to achieve safety category 2 control, so low-risk machines are also redundant (...

Compatible with the contact input relay module for the basic type of safety control. Key features: It is equipped with a terminal detachable type that allows for easy module replacement. It is equipped with a fault diagnosis function with a dual safety circuit. Built-in LED that monitors the operation of the built-in relay. Terminal Blocks for Finger Safety ...

A single unit can protect an area of 270° and 5 m long, so it can be used in a wide range of places, such as large-scale equipment using industrial robots and conveyor lines that continuously transmit long distances. The SE2L is a safety sensor that detects proximity. Simply set the outer area of the 2 protected areas ...

4 个触点，双安全电路，1NC+1NC 1NC+1NC 电路，弹簧锁，后解锁按钮 紧凑的机身：35x40x127mm 1400N 锁定强度 适合小负载的镀金触点 头部方向可以旋转 允许 8 个不同的执行器入口 适用标准 ...