Japan SMC_MY1B25TFG-500Z Basic Rodless Cylinder Air buffer 0.8MPa

Create Date: 2024-8-30 12:03:23|Source: SMC

Previous
Next
Brand:
SMC

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
MY1B25TFG-500Z

Product Introduction
SMC 500mm stroke 0.8 MPa Dual Acting Rodless Actuator MY1B25TFG-500Z, 25mm bore diameter, air cushioned, Rc 1/8 port connection

quality assurance

Attentive service

Secure transactions

Product Description

MY1B25TFG-500Z Introduction: SMC 500mm stroke 0.8 MPa Dual Action Rodless Actuator MY1B25TFG-500Z, 25mm bore diameter, air cushioning, RC 1/8 port connection

Japan SMC_MY1B25TFG-500Z picture display

SMCMY1B25TFG-500Z

Model features introduced

MY1B-Z basic rodless cylinder
Double-acting mechanically connected rodless cylinders with air cushioning and magnetic pistons as standard. The MY1b-Z provides a simple, compact, and reliable method for positioning or moving elements and polishing components. These rodless actuators are suitable for a wide range of applications, including assembly automation, packaging lines, and electronics production. SMC's revised MY1B series offers a variety of advantages over the original design

Compact design, up to 17% lighter than previous models, automatic switch can be installed in any position, pipes can be connected from 4 directions, gasket needles are easily adjusted using a hex wrench, and side support is used to prevent detection of cylinder tubes in longer strokes. The new dust seal uses magnetic attraction to improve retention and extend operating life. Floating bracket connection for easier installation

Model parameters are introduced

attribute	numeric value
action	pair
calibre	25mm
itinerary	500mm
Maximum operating pressure	0.8MPa
Absolute maximum pressure	1.2Mpa
Pressures of 7 bar can be applied	343N
Buffer type	air
Port connections	Rc1/8
size	720x53x54mm
weight	1.3kg
width	53mm
length	720mm
Size type	standard
height	54mm

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.

This article introduces the Japan brand SMC model as MY1B25TFG-500Z, the introduction of this product is: SMC 500mm stroke 0.8 MPa double action rodless actuator MY1B25TFG-500Z, 25mm aperture, air buffer, RC 1/8 port connection, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.

More on that

	Japan SMC_CDQ2B50TF-30DZ Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B50TF-30DZ Introduction: SMC CQ2 Series 1 MPa 30mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B50TF-30DZ, 50mm bore, 68.5 x 71 x 64mm Japan SMC_CDQ2B50TF-30DZ picture display Model features introduced cylinder Compact ...
	Japan SMC cylinder CG1/CDG1 Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・A model without trunnion mounting holes has been added to the basic model. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...
	Japan SMC_CDQ2B40-20DCZ Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B40-20DCZ Introduction: SMC CQ2 Series 20mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B40-20DCZ, 40mm bore, 66.5 x 52 x 52mm Japan SMC_CDQ2B40-20DCZ picture display Model features introduced CQ2 series compact cylinders ...
	Japan SMC_MXS-BS16 Stroke Regulator Double Acting Series Rectangular Cylinder Introduction to MXS-BS16: SMC MXS Series Damper MXS-BS16, 53.7mm overall length, M10 x 1 connection, -10 → +60°C Japan SMC_MXS-BS16 picture show Model features introduced MXS-Stroke Adjuster SMC's pneumatic slide series MXS provides users with a solution to the ...
	Japan SMC Compact Cylinder CQSW Shortened square cylinder with full length for magnetic switch mounting on 3 or 4 sides. A compact cylinder with a magnetic switch that does not protrude from the body. ・Mounting brackets for double earrings and compact foot mounts have been added. ・With magnetic switch (CDQS series: CDQS, CDQSW, CDQSK ...)
	Japan SMC Compact Cylinder, Air Saving Type/Polygon Piston Rectangular Cylinder CDQ2B-X3206 The built-in exhaust gas recovery circuit and polygonal piston make it compact and lightweight ・Air consumption: Up to 46% reduction ・Air from the press-out side is diverted to the suction side for air reuse (Built-in exhaust recovery circuit) ・Air saving can be achieved by piping alone ・Small( ...
	Japan SMC_AMC610-10B Exhaust Air Cleaner R1 Male Thread Connection 1in AMC610-10B Introduction: SMC AMC Series Exhaust Air Cleaner AMC610-10B, R 1 Male Thread Connection Japan SMC_AMC610-10B photo display Model features introduced Exhaust cleaner The SMC series of AMC exhaust cleaners are designed to ensure a neat air supply to the equipment, and in addition, ...
	Japan SMC floating joints JA, JAF, JAL series Neutralize the "eccentricity" or "insufficient parallelism accuracy" of the cylinder. So that the pivot does not need to coincide. Model: Standard type Applicable bore(mm):6,10,15,20,25,30,40,50,63,80,100,125,140,160 All suppliers of 76 Technology have undergone strict ...
	Japan SMC cylinder CM2KW-Z Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・Oscillating metal mounts for single earrings and trunnions have been added. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...
	Japan SMC cylinder CM2W-Z Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・Oscillating metal mounts for single earrings and trunnions have been added. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...
	Japan SMC_CDU16-20D Double Acting Air Cylinder 16mm Bore Diameter Single Rod 0.7 MPa CDU16-20D Introduction: SMC CU Series 20mm Stroke Double Action Single Rod Pneumatic Multi-Mounting Cylinder CDU16-20D, 16mm Bore Diameter, 0.7 MPa Max Operating Pressure Japan SMC_CDU16-20D picture display Model features introduced CU series cylinders The series CU Liberty Ann ...
	Japan SMC cylinder MBB By changing the shape of the cylinder head, the mass of the cylinder head was reduced by 10%. Models with rod end metal mounts and oscillating metal mounts have been added (no need to be separately equipped). ・With magnetic switch (MDB-Z series: MDB, MDBW, MDBK, MDBKW, MDBB, MDB□Q) How to move ...
	Japan SMC_GKM12-24 Bar Clevis GKM Series Suitable for 40mm drilling GKM12-24 Introduction: SMC GKM Series Rod Clevis GKM12-24, suitable for 40mm drilling Japan SMC_GKM12-24 photo show Model features introduced CP95/CP96 - Annex Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that all ...
	Japan SMC cylinder CBA2 Up to 15% reduction in mass. ・Air cushioning control is easy. ・It can be installed from small magnetic switches to highly magnetic-resistant switches. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic switch (CDA2 series: CDA2, ...)
	Japan SMC Slim Cylinder/Guide Rod Type CQM/CDQM Compact cylinders CQS and CQ2 series have built-in guide rods. ・The non-rotation accuracy is ±0.2°C or less. ・Lateral load resistance of 2-4 times *Compared to the CQ series of low-profile cylinders. ・Loads can be mounted directly. ・The mounting dimensions are interchangeable with the CQS and CQ2 series. ・Belt ...
	Japan SMC dust countermeasures cylinder -XC4 A strong dust scraper ring is used at the scraper ring, which is suitable for use in dusty environments such as foundry equipment, construction machinery, and construction vehicles. Customized content: With a strong dust ring All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. We...
	Japan SMC_CDU25-50D Dual-Acting, Single Lever, Pneumatic Multi-Mounting Cylinder CDU25-50D Introduction: SMC CU Series 50mm Stroke Double Action Single Rod Pneumatic Multi-Mounting Cylinder CDU25-50D, 25mm Bore Diameter, 0.7 MPa Max Operating Pressure Japan SMC_CDU25-50D picture display Model features introduced CU series cylinders The series CU Liberty Ann ...
	Japan SMC_CD55B50-50M Double Acting Single Rod Pneumatic Compact Cylinder CD55B50-50M Introduction: SMC C55 Series 1 MPa 50mm stroke double acting single rod pneumatic compact cylinder CD55B50-50M, 50mm bore, 103 x 64 x 64mm Japan SMC_CD55B50-50M picture display Model features introduced ISO compact C55 cylinder ISO ...
	Japan SMC stainless steel cylinder CJ5・S It is used in environments where water droplets are splashed on food machinery. ・With magnetic switch (CDJ5/S series: CDJ5・S, CDG5/S series: CDG5・S) Format: Standard Mode of action: Double acting Bore bore (mm): 10,16 All suppliers of 76 Technology have undergone strict ...
	Japan SMC_CQ2B20-10DC 10mm stroke double acting single rod pneumatic compact cylinder CQ2B20-10DC Introduction: SMC CQ2 Series 10mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CQ2B20-10DC, 20mm Bore, 34 x 36 x 36mm Japan SMC_CQ2B20-10DC photo show Model features introduced cylinder Compact single and double acting cylinders, ...