CRB2BW30-90SZ Introduction: SMC CRB Series 90° Dual Action Rotary Actuator CRB2BW30-90SZ, 30mm bore diameter, 1 MPa max output, rubber cushioning
Japan SMC_CRB2BW30-90SZ photo show
Model features introduced
Vane rotary actuator CRB2-Z
SMC has upgraded the range by adding the CRB2-Z to its CRB2 series rotary actuators. These new actuators feature dual shaft and parallel mounting ports for improved ducting and ease of installation.
Direct mounting, automatic switch can be fixed in any position, side port, rotation angle 90°, 180° or 270°, biaxial design with angle adjuster
Blade type 10-80mm diameter
A range of small size, light duty rotary actuators for turning small loads in enclosed spaces.
Model parameters are introduced
attribute | numeric value | Manufacturer series | CRB | action | pair | calibre | 30mm | Rotation angle | 90° | Maximum operating pressure | 1MPa | Buffer type | rubber | Port connections | M5x0.8 | weight | 199g |
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.
This article introduces the Japan brand SMC model is CRB2BW30-90SZ, and the introduction of this product is: SMC CRB series 90° double action rotary actuator CRB2BW30-90SZ, 30mm aperture, 1 MPa maximum output, rubber buffer, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Japan SMC flat cylinder MU/MDU
The piston is oval in shape, saving space.
Can be installed in multiple orientations.
・Small magnetic switches can be installed in all four directions.
・The magnetic switch does not protrude out of the body.
・Stroke up to 300 mm.
・With magnetic switch (MDU series: MDU, MDUW)
Mode of action: single ...
|
|
Japan SMC powder resistant cylinder CM2-XC92
・Suitable for use in environments where fine powders such as ceramic powder, toner powder, paper powder, and metal powder (excluding welding slag for welding) float
・Durability improved by 4 times (for standard products)
・The rod side cylinder head is equipped with two lubrication retainers
Prevents the intrusion of tiny powders of less than 30 μm
・Lubrication ...
|
|
Japan SMC cylinder CM2KW-Z
Standardization of internal threads at the front end of the rod.
・Magnetic switch operability is improved and position adjustment is easier.
・Oscillating metal mounts for single earrings and trunnions have been added.
・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately).
・With magnetic ...
|
|
Japan SMC_C55-L032 Feet C55 Series Suitable for 32mm drilling Compact
C55-L032 Introduction: SMC C55 Series Leg C55-L032, suitable for 32mm drilling
Japan SMC_C55-L032 photo display
Model features introduced
ISO compact C55 cylinder
ISO standard compact cylinder with hard anodized aluminum body. Double-acting models are available with standard magnetic...
|
|
Japan SMC Dust-Resistant Cylinder CQ2-XC4□
CM2-XC4□ New has been added
・Durability in dusty environments is 6 times that of standard products
Corresponding to powder with particle size of 20-100μm
Compatible with ceramic powder, toner, paper powder, and metal powder
*Welding slag is excluded
・You can choose according to your application
The piston rod part is equipped with a lubrication retainer (lubrication retention ...
|
|
Japan SMC_MXS-BS16 Stroke Regulator Double Acting Series Rectangular Cylinder
Introduction to MXS-BS16: SMC MXS Series Damper MXS-BS16, 53.7mm overall length, M10 x 1 connection, -10 → +60°C
Japan SMC_MXS-BS16 picture show
Model features introduced
MXS-Stroke Adjuster
SMC's pneumatic slide series MXS provides users with a solution to the ...
|
|
Japan SMC_CDQSB25-50D Pneumatic Compact Cylinder Double Acting Single Rod
CDQSB25-50D Introduction: SMC CQS Series 1 MPa 50mm stroke double acting single rod pneumatic compact cylinder CDQSB25-50D, 25mm bore, 77.5 x 40 x 40mm
Japan SMC_CDQSB25-50D picture display
Model features introduced
CQS cylinders
CQS series ...
|
|
Japan SMC_C85C25 Fixing U-clamp for 20 mm 25 mm drilling
C85C25 Introduction: SMC C85 Series C85C25 Clevis Clamp, suitable for 20 mm, 25 mm drilling
Japan SMC_C85C25 picture display
Model features introduced
C85 series fixtures
Suitable for use with C85 series single and double acting cylinders, the foot fixtures are supplied in pairs
Diameter 10- ...
|
|
Japan SMC_MY1B16G-150 Basic Mechanically Coupled Rodless Cylinder Double Acting
MY1B16G-150 Introduction: SMC MY1B Series 150mm stroke 0.8 MPa Dual Action Rodless Actuator MY1B16G-150, 16mm bore, air cushioned
Japan SMC_MY1B16G-150 photo show
Model features introduced
MY1B basic rodless cylinder
Basic Mechanically Coupled Rodless ...
|
|
Japan SMC Long Life Cylinder CM2-XB24
With the new technology, the durability is more than 4 times that of the previous one
Reduce the number of maintenances
・The specifications and dimensions are the same as those of the current product (CM2 series cylinders).
Format: Standard type
Action mode: double action with single rod
Cylinder bore inner diameter (mm): 20, 25, 32, 40
All supplies of 76 Technology ...
|
|
Japan SMC floating joint JA-X530, JAF-X530, JAL-X530 series
Neutralize the "eccentricity" or "insufficient parallelism accuracy" of the cylinder.
So that the pivot does not need to coincide.
Model: Standard type
Applicable bore (mm): 180,200
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-...
|
|
Japan SMC_CDU10-15D Rubber Pneumatic Multi-Mounting Cylinder
CDU10-15D Introduction: SMC CU Series 15mm Stroke Double Action Single Rod Pneumatic Multi Mounting Cylinder CDU10-15D, 10mm Bore, 0.7 MPa Max Operating Pressure
Japan SMC_CDU10-15D picture display
Model features introduced
CU series cylinders
The series CU Liberty Ann ...
|
|
Japan SMC Compact Cylinder CQSW
Shortened square cylinder with full length for magnetic switch mounting on 3 or 4 sides.
A compact cylinder with a magnetic switch that does not protrude from the body.
・Mounting brackets for double earrings and compact foot mounts have been added.
・With magnetic switch (CDQS series: CDQS, CDQSW, CDQSK ...)
|
|
Japan SMC stainless steel cylinder CJ5・S
It is used in environments where water droplets are splashed on food machinery.
・With magnetic switch (CDJ5/S series: CDJ5・S, CDG5/S series: CDG5・S)
Format: Standard
Mode of action: Double acting
Bore bore (mm): 10,16
All suppliers of 76 Technology have undergone strict ...
|
|
Japan SMC square cylinder CU-X3160
The square piston is used to achieve compact size and weight reduction
Weight: 59% lighter (170g→70g)
Overall length: 25% shortened (132mm→99.5mm)
Width and height: 23% reduction (24mm→18.4mm)
・Smaller than the current model, but with a higher output
・All 4 sides can be pressed ...
|
|
Japan SMC free-mount cylinder CU/CDU
Space-saving cylinders that can be mounted directly on multiple sides.
・With magnetic switch (CDU series: CDU, CDUW, CDUK, CDUKW, CDU-A, ZCDUK)
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from my ...
|
|
Japan SMC_MXS6-10 Dual Action Sliding Unit Actuator 6mm Bore Diameter
Introducing the MXS6-10: SMC MXS Series 10mm Stroke Double Action Sliding Unit Actuator MXS6-10, 6mm bore, rubber cushioned, 48 x 32 x 20mm
Japan SMC_MXS6-10 picture display
Model features introduced
Pneumatic slide series MXS ...
|
|
Japan SMC Compact cylinder RQ/RDQ with air cushioning
The thin cylinder CQS and CQ2 series are equipped with an air buffer mechanism.
The overall length needs to be extended by +2.5mm - 13mm.
・Approximately 3 times more absorbable kinetic energy (compared to cushioned CQS and CQ2)
・A compact foot mount has been added.
・With magnetic switch (RDQ series: RDQ ...
|
|
Japan SMC cylinder CA2-Z
Up to 15% reduction in mass.
・Air cushioning control is easy.
・It can be installed from small magnetic switches to highly magnetic-resistant switches.
・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately).
・With magnetic switch (CDA2 series: CDA2, ...)
|
|
Japan SMC Compact Cylinder CQP2
This space-saving cylinder with a shortened overall length is suitable for compact devices.
・Small magnetic switches can be installed on all 4 sides (2 sides from ø12 to ø25).
・The magnetic switch does not protrude.
・Lightweight: 5-13% reduction (compared to the conventional CQ2)
・Added double earrings for safety ...
|
|