Japan SMC_MHS3-32D 0.6 MPa 3 mechanical finger double acting pneumatic grip

Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・A model without trunnion mounting holes has been added to the basic model. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...

・Polygonal piston is used to make it smaller and lighter ・The height is the same, but the width and overall length have been shortened Weight: 28% lighter (278g→200g) Width: 27% reduction (45mm→33mm) Overall length: 7% shortened (50mm→46.5mm) ・A small magnetic switch can be mounted on both sides ...

CRB2BW20-180SZ Introduction: SMC CRB Series 180° Dual Action Rotary Actuator CRB2BW20-180SZ, 20mm bore diameter, 0.7 MPa maximum output, rubber cushioning Japan SMC_CRB2BW20-180SZ photo show Model features introduced Vane rotary actuator CRB2 ...

Compact cylinders CQS and CQ2 series have built-in guide rods. ・The non-rotation accuracy is ±0.2°C or less. ・Lateral load resistance of 2-4 times *Compared to the CQ series of low-profile cylinders. ・Loads can be mounted directly. ・The mounting dimensions are interchangeable with the CQS and CQ2 series. ・Belt ...

GKM16-32 Introduction: SMC GKM Series Rod Clevis GKM16-32, suitable for 50 mm, 63 mm drilling Japan SMC_GKM16-32 photo display Model features introduced CP95/CP96 - Annex Model parameters are introduced All suppliers of 76 Technology have been strictly audited, ...

CD55B32-50 Introduction: SMC C55 Series 1 MPa 50mm stroke double acting single rod pneumatic compact cylinder CD55B32-50, 32mm bore, 101 x 46 x 46mm Japan SMC_CD55B32-50 photo display Model features introduced ISO compact C55 cylinder ISO Standards ...

CDU20-20D Introduction: SMC CU Series 20mm Stroke Double Action Single Rod Pneumatic Multi-Mounting Cylinder CDU20-20D, 20mm Bore Diameter, 0.7 MPa Max Operating Pressure Japan SMC_CDU20-20D picture display Model features introduced CU series cylinders The series of CU free installation ...

CDQMB32-20 Introduction: SMC Pneumatic Guide Cylinder CQM Series CDQMB32-20 Japan SMC_CDQMB32-20 picture display Model features introduced SMCCQM Compact Guide/Guide Cylinder SMCCQM Compact Guide/Guide Cylinder can be directly loaded, and the side load bearing capacity is S...

CRB2BW20-270SZ Introduction: SMC CRB Series 270° Dual Action Rotary Actuator CRB2BW20-270SZ, 20mm bore diameter, 0.7 MPa max output, rubber cushioning Japan SMC_CRB2BW20-270SZ photo show Model features introduced Vane rotary actuator CRB2 ...

Metal mounts with both feet and rodless side flanges have been added. ・Magnetic switch operability is improved and position adjustment is easier. ・Magnetic switch track mounting type has been added. ・Added models with rod end metal mounts and swing metal mounts (no need to equip them separately) ・ ...

CJ1B4-15SU4 Introduction: SMC CJ1 Series 15mm Stroke Single Acting Single Rod Pneumatic Pneumatic Pin Type Cylinder CJ1B4-15SU4, 4mm Bore, No Cushion Cushioning Japan SMC_CJ1B4-15SU4 photo show Model features introduced Pneumatic needle cylinder Automatic precision design direct plug-in ...

C85C16 Introduction: SMC C85 Series C85C16 Clevis for 12 mm, 16 mm drilling Japan SMC_C85C16 picture display Model features introduced C85 series fixtures Suitable for use with C85 series single and double acting cylinders, the foot fixtures are supplied in pairs Diameter 10- ...

CD85N10-30-B Introduction: SMC C85 Series Double Acting Pneumatic Fine Cylindrical Cylinder CD85N10-30-B, 30mm stroke, 1 MPa maximum operating pressure, 10mm bore diameter Japan SMC_CD85N10-30-B photo show Model features introduced SMCC85 cylinder SMCC85 Cylinder Charm ...

Mass: 10% reduction (ø50-100 strokes). The shape of the rod-side cylinder head and the rodless side cylinder head have been changed, and the mass has been reduced. ・Small magnetic switches can be mounted on all four sides. ・The magnetic switch mounting slot is equipped with a dust strip. Prevents accumulation of foreign matter (optional) ・With magnetic switch (MD ...

Introduction to the MXS8-10AS: SMC MXS Series 10mm Stroke Double Action Sliding Unit Actuator MXS8-10AS, 8mm bore, rubber cushioned, 56 x 40 x 24mm Japan SMC_MXS8-10AS picture display Model features introduced Pneumatic slide series MXS ...

The built-in exhaust gas recovery circuit and polygonal piston make it compact and lightweight ・Air consumption: Up to 46% reduction ・Air from the press-out side is diverted to the suction side for air reuse (Built-in exhaust recovery circuit) ・Air saving can be achieved by piping alone ・Small( ...

The thin cylinder CQS and CQ2 series are equipped with an air buffer mechanism. The overall length needs to be extended by +2.5mm - 13mm. ・Approximately 3 times more absorbable kinetic energy (compared to cushioned CQS and CQ2) ・A compact foot mount has been added. ・With magnetic switch (RDQ series: RDQ ...

Mass ** reduced by 15%. Easy air cushioning control. ・It can be installed from small magnetic switches to highly magnetic-resistant switches. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic switch (CDA2 series: CDA2, C...

It is the same as the standard type ・Rear-mountable ・Universal cylinder for mounting CJ2、CM2、CG1、CQ2 All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our commitment to the quality of our products ...

By changing the shape of the cylinder head, the mass of the cylinder head was reduced by 10%. Models with rod end metal mounts and oscillating metal mounts have been added (no need to be separately equipped). ・With magnetic switch (MDB-Z series: MDB, MDBW, MDBK, MDBKW, MDBB, MDB□Q) How to move ...