|
Moore/Murr EMC Suppressor Module 23164
Introduction: Moore/Murr EMC Suppressor Module 23164
Features:
3× 575 V AC
VDR
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
Product parameters
Frequently...
|
|
Moore/Murr EMC Suppressor Module 23121 39×39×44 mm
Introduction: Moore/Murr EMC Suppressor Module 23121
Features:
3× 400 V AC
VDR
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
Product parameters
Frequently...
|
|
Moore/Murr EMC Suppressor Module 23181 Operating Frequency 50... 60Hz
Introduction: Moore/Murr EMC Suppressor Module 23181
Features:
3× 575 V AC
RC
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
Product parameters
Input...
|
|
MURR/MURR transformer 86348 output voltage 230VAC
Introduction: MURR/MURR transformer 86348
Features:
Single-phase - control isolation transformer
100 VA
Insulation class T 40/B
Degree of protection IP20
Other voltage specifications need to be customized
Product parameters
output
Output...
|
|
Moore/Murr EMC Suppressor Module 26521
Introduction: Moore/Murr EMC Suppressor Module 26521
Features:
24 V AC/DC
diode
Product parameters
Input Voltage: 0... 30 V DC
Material: Flame retardant plastic according to (UL 94)
Damping factor: about 1.5× UN (amount ...
|
|
The Moore/Murr TREE 4TX Metal Unmanaged Switch 58151 weighs 0.52kg
Summary: Unmanaged switches are ideal for any network where configuration or diagnostic capabilities are not critical. They are quick and easy to install and offer a variety of styles. Power is supplied to the IP67 switch via the output port of the fieldbus module.
...
|
|
Moore/Murr EMC Suppressor Module 3124811 H×W×D27×27.5×15.5mm
Introduction: 3124811 of the Moore/Murr EMC suppressor module
Features:
24 V AC/DC
LED
The plug gasket is removed during assembly, and other color LEDs can be customized
Product parameters
LED indication: (yellow opac)
Input voltage: 12 ...
|
|
Moore/Murr EMC Suppressor Module 26081
Introduction: Moore/Murr EMC Suppressor Module 26081
Features:
24 V DC
Diodes/Zener diodes
For other configurations and voltages
Product parameters
Input voltage: 12... 30 V DC
Material: Flame retardant plastic According to (UL ...
|
|
Moore/Murr filter 10416 operating frequency 50-60Hz
Introduction: Moore/Murr filter 10416
Features:
Current: 20 A
Can be mounted on rails
Universal application
Attenuation curves are available separately
Product parameters
Technical data
Operating voltage max. 250 V AC/300 V DC
...
|
|
Moore/Murr MEF Power Interference Filter 10539 Screw connection
Introduction: The Moore/Murr MEF Power Interference Filter 10539 is an essential component in the system to effectively prevent electromagnetic waves from interfering with machines and systems. Reduced interference while increasing resistance to internal and external interference.
Features:
Suitable for single-phase and tri-phase ...
|
|
Moore/Murr EMC Suppressor Module 3124121
Introduction: Moore/Murr EMC Suppressor Module 3124121
Features:
24 V DC
Diode + LED
The plug gasket is removed during assembly, and other color LEDs can be customized
According to the polarity
Pay attention to the pin arrangement (PE is located on the cable outlet side). 1 ...
|
|
Murr/Murr EMC Suppressor Module 3124016 Maximum power 50W
Introduction: Moore/Murr EMC Suppressor Module 3124016
Features:
230 V AC/DC
LED
The plug gasket is removed during assembly, and other color LEDs can be customized
Product parameters
LED indication: (yellow opac)
Input voltage: 1 ...
|
|
Moore/Murr filter 10471
Introduction: Moore/Murr filter 10471
Features:
Current: 6 A
Can be mounted on rails
Attenuation curves are available separately
Immunity to differential mode interference
Product parameters
description
Applications Common Mode Interference: - High Frequency Repetitive Switchgear, ...
|
|
Murr/Murr EMC Suppressor Module 20033 Maximum power 25W
Introduction: Moore/Murr EMC Suppressor Module 20033
Features:
230 V AC/DC
RC
For other configurations and voltages
Product parameters
Input voltage: 110... 250 V AC/DC
Maximum Power (W): 25 W (VA)
...
|
|
Murr/Murr MTS single-phase safety transformer 86345 with 250 volt amperes
Introduction: A Moore/Murr MTS single-phase safety transformer is a device that isolates electrical components from the public power grid, but supplies them in the same way. This allows for safe work on the electrical system with live electricity. An isolation transformer consists of two separate coils or two parts ...
|
|
The Moore/Murr MTS single-phase safety transformer 86342 outputs 24 V AC
Introduction: A Moore/Murr MTS single-phase safety transformer is a device that isolates electrical components from the public power grid, but supplies them in the same way. This allows for safe work on the electrical system with live electricity. An isolation transformer consists of two separate coils or two parts ...
|
|
Moore/Murr EMC Suppressor Module 26185
Introduction: Moore/Murr EMC Suppressor Module 26185
Features:
24 V AC/DC
48 V AC/DC
VDR
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 24... 53 V AC/DC
Material:...
|
|
Murr/Murr EMC Suppressor Module 23020 Size 41×41×41mm
Introduction: Moore/Murr EMC Suppressor Module 23020
Features:
3× 400 V AC
RC
PG9
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
For DIN- ...
|
|
Moore/Murr EMC Suppressor Module 3124169 15×63×21.5mm
Introduction: Murr/Murr EMC Suppressor Module 3124169
Features:
24 V AC/DC
RC + LED
The plug gasket is removed during assembly, and other color LEDs can be customized
Pay attention to the pin arrangement (PE is located on the cable outlet side). 180 ° Rotation Product ...
|
|
Moore/Murr EMC Suppressor Module 23050 Frequency 50... 60 Hz
Introduction:MURR/MURR EMC Suppressor Module 23050 is suitable for other voltage, frequency, motor power suppressors need to be customized. RC suppressors must not be used in inverter motors.
Features:
3× 400 V AC
3× 575 V AC
RC
For...
|