Japan SMC_C55-F025 flange for 25mm drilled compact C55 cylinders

With the new technology, the service life is more than 4 times that of the current product Reduced maintenance ・The specifications and dimensions are the same as those of the current product (free-mount cylinder CU series). Form: Long life Mode of action: double action with single rod Bore I.D.(mm): 6,10,16,20,2 ...

Cylinders with a bore ø4 and stroke 5 can also be fitted with two magnetic switches. ・Ø2 quick-change couplings and speed control valves can be connected. ・With magnetic switch (CDJP2 series: CDJP2) Mode of action: Single acting (retracted) Bore bore (mm): 4,6,10,15 Seventy-six ...

D5080 + E5080 Introduction: SMC D Series Female Side U-Clamp & Elbow Side U-Clamp D5080 + E5080, suitable for 80mm drilling Japan SMC_D5080 + E5080 Picture show Model features introduced CP95/CP96 - Annex Model parameters are introduced Seven or six ...

With the new technology, the durability has been increased by more than 4 times Reduce the number of maintenances ・The specifications and dimensions are the same as those of the previous product (CQ2 series of compact cylinders). Mode of action: double action with single rod Cylinder bore bore (mm): 12, 16, 20, 25, 32, 40 All suppliers of 76 Technology ...

Metal mounts with both feet and rodless side flanges have been added. ・Magnetic switch operability is improved and position adjustment is easier. ・Magnetic switch track mounting type has been added. ・Added models with rod end metal mounts and swing metal mounts (no need to equip them separately) ・ ...

Intermediate sizes ø45, ø56, ø67, and ø85 have been added. Save air and space. ・The overall length is shortened by 27mm. ・Weight reduction by up to 30% (1.43kg→1.00kg). ・Air saving: Up to 29% reduction. Air consumption can be reduced by choosing the right size. ・ ...

JA10-4-070 Introduction: SMC JA Series Floating Fitting JA10-4-070, suitable for 10mm drilling Japan SMC_JA10-4-070 Photo show Model features introduced Floating joints Deviations between drive components and cylinders can be reduced, significantly reducing installation effort and time Type...

It is suitable for use in environments exposed to water and coolant. Magnetic switch with strong water resistance 2-color display. ・Suitable for machine tools, food machinery, car washers, etc. Form: Rotary clamping cylinder Mode of action: Double acting Bore I.D.(mm):16,20,25,32,40,50 ...

CDG1BN40-200Z Introduction: SMC CDG1 Series Double Acting Pneumatic Fine Cylindrical Cylinder CDG1BN40-200Z, 200mm stroke, 1 MPa maximum operating pressure, 40mm bore diameter Japan SMC_CDG1BN40-200Z picture show Model features introduced CG1 cylinder SMCCG1 Series ...

CM2-XC4□ New has been added The durability in the dust environment is 6 times that of the standard product Corresponding to powder with particle size of 20-100μm Compatible with ceramic powder, toner, paper powder, and metal powder *Welding slag is excluded ・You can choose according to your application The piston rod part is equipped with a lubrication retainer (lubrication retention) ...

Air consumption: Up to 73% reduction Comparison of 3.6L (ANR), 2.3L (ANR→), CQ2, ø50, 200 strokes ・Thrust starts 5 mm before the end of the stroke (extension only) The thrust stroke position is operated by an auxiliary cylinder to save energy ・Thrust generation ...

CDQMB32-20 Introduction: SMC Pneumatic Guide Cylinder CQM Series CDQMB32-20 Japan SMC_CDQMB32-20 picture display Model features introduced SMCCQM Compact Guide/Guide Cylinder SMCCQM Compact Guide/Guide Cylinder can be directly loaded, and the side load bearing capacity is S...

Mass ** reduced by 15%. ・Air cushioning control is easy. ・It can be installed from small magnetic switches to highly magnetic-resistant switches. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic switch (CDA2 series: CDA2, ...)

With the new technology, the service life is more than 4 times that of the current product Reduced maintenance ・Same specifications and dimensions as the current product (CUJ series compact free-mount cylinders). Form: Long life Mode of action: double action with single rod Bore I.D.(mm): 4,6,8,10 ...

・Standardization of four rail models. ・There is a wide variety of models, and you can choose according to the load quality and the required accuracy. Type: Plain bearing type How to operate: Cam follow-up guide rail type Bore bore (mm): 16,20,25,32,40,50,63 ...

Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・A model without trunnion mounting holes has been added to the basic model. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...

Metal mounts with both feet and rodless side flanges have been added. ・Magnetic switch operability is improved and position adjustment is easier. ・Magnetic switch track mounting type has been added. ・Added models with rod end metal mounts and swing metal mounts (no need to equip them separately) ・ ...

Standardization of 4 rail models. There is a wide range of models, which can be selected according to the load quality and the required accuracy. Type: Plain bearing type Operation method: Linear guide type Barrel bore (mm): 10,16 All suppliers of 76 Technology have been strictly audited to ensure that ...

Mass: 10% reduction (ø50-100 strokes). The shape of the rod-side cylinder head and the rodless side cylinder head have been changed, and the mass has been reduced. ・Small magnetic switches can be mounted on all four sides. ・The magnetic switch mounting slot is equipped with a dust strip. Prevents accumulation of foreign matter (optional) ・With magnetic switch (MD ...

CDQMB16-20 (KIT) Introduction: SMC Pneumatic Guide Cylinder CQM Series CDQMB16-20 Japan SMC_CDQMB16-20 (KIT) photo show Model features introduced SMCCQM Compact Guide/Guide Cylinder SMCCQM Compact Guide/Guide Cylinders can be directly loaded, sideways negative ...