KEYENCE/KEYENCE Subminiature Amplifier Built-in Photoelectric Sensor PR-M/F Series Square Reflective Type (Background Suppression) Cable Type 15mm PR-FB15N1
specification
Model | PR-FB15N1 | type | BGS reflection | output | NPN | shape | bracket | Connection patterns | 1m cable | Detection distance | 1 to 15 mm | Control the number of outputs | 2 | Output actions | Output 1 | ON when light is in | Output 2 | ON when shading | Response time | Output 1 | 0.5 ms | Output 2 | ON → OFF:2.7ms、OFF → ON:0.5ms | Sensitivity adjustment | N/A | Spot diameter | 2.5x4.5mm (at 15mm) | light source | 4 Element Point Light Red LED (650nm) | Prevent mutual interference function | 4 units | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | Control the output | 30 VDC or less, 50 mA or less | Leakage current: | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | Residual Voltage: | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | Current consumption | 19 mA | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | Insulation resistance | 20 MΩ or more (500 VDC) | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | Ambient temperature | -25 to +55 °C (no freezing) | Store at ambient temperature | -25 to +75 °C | relative humidity | 35 to 85 % RH (non-condensing) | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | fittings | Operator's manual | weight | About 18 g |
| | | | |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-FB15N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-B05
Mini slim side-mounted metal parts
Type: Small slender side mount
Number of Builts: 1pcs
Material: SUS316L
Remarks: Comes with M3 screw×2, plate nut
Weight: approx. 10 g
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensing ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB100CP
Square Reflective Type M8 Connector Type 100mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on the IE ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB250C3P
Square Reflective M8 connector type 250mm
*1 The M8 connector (3-pin) type does not have an external input function.
*2 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to ...
|
|
KEYENCE/KEYENCE digital laser sensor LV-N11CN
Amplifier M8 connector Main unit NPN LV-N11CN
Supply voltage: 24 VDC (operating voltage 10-30 VDC (including ripple)), ripple (P-P) 10 % or less, Class 2 or LPS*4*5
Ambient temperature: -20 to +55 °C (no freezing)*8
Relatively wet ...
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-CB2
Power cable for MU-N series
End Shape: Cable Termination: 2 Core Loose Wire, Controller: Connector
Length: 2 m
Material: PVC (Vinyl Chloride)
Remarks: For extended units
Weight: approx. 100 g
This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87904
Sensor head cable 5 m
Type: Sensor head-to-amplifier cable
Length: 5 m
Weight: approx. 360 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87904 product, if you are interested in KEYENCE/KEYENCE products, please also contact our ...
|
|
KEYENCE/KEYENCE Sensor Head Color Screen CA-MP120
12 inch LCD color screen (analog XGA) CA-MP120
Pixels: 1,024 (W) × 768 (H) pixels or 800 (W) × 600 (H) pixels
Display area: 245 (W) × 184 (H) mm
Supply voltage: 24 VDC ±10 %
Deplete...
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-CB8
Power cable for MU-N series
End Shape: Cable Termination: 8-core loose wire, Controller: Connector
Length: 2 m
Material: PVC (Vinyl Chloride)
Remarks: For the main unit
Weight: approx. 150 g
This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser ...
|
|
The KEYENCE/KEYENCE fiber optic sensor CZ-V1/K1P weighs approximately 115 g
Introduction: The RGB digital fiber optic sensor CZ series can detect objects that cannot be detected by some sensors through 2 color screens and 3 sensing methods.
Product parameters
This article introduces the KEYENCE/KEYENCE Fiber Optic Sensor CZ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87905
Sensor head cable 10 m
Type: Sensor head-to-amplifier cable
Length: 10 m
Weight: approx. 400 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87905 product, if you are interested in KEYENCE/KEYENCE products, please also contact us ...
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-N11
Multi-function sensor controller mother machine
specification
*1 Depending on the connected model, the response time and the type and number of inputs/outputs that can be used may vary.
For details, refer to the "MU-N Series User Manual" of the connected model.
*2 Number of connections to N-bus devices ...
|
|
KEYENCE/KEYENCE Sensor Head LJ-V7300
Installation Status: Diffuse
Reference distance: 300 mm
Enclosure Rating: IP67 (IEC60529)*8
Ambient light: Incandescent lamp: 10,000 lux*9 max
Ambient temperature: 0 to +45 °C*10
Relative humidity: 85%RH or less (non-condensing)
Seismic resistance: 1 ...
|
|
KEYENCE/KEYENCE laser sensor LR-TB2000C/5000C 660nm
Summary: The LR-T series offers a variety of innovative features to detect previously thought undetectable targets. These features allow the user to tailor the sensor to the specific application, ensuring excellent detection performance. The LR-T Series provides stable detection from a position that does not obstruct the operator, eliminating the need for manipulation.
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-080
Sensing head 80 mm
specification
*1 X: Laser long dimension direction, Y : Laser short dimension direction
*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.
*3 When facing at the base distance. Sweep...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51CN
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Mini Slim Permeable Type M8 Connector Type 1.2m
specification
This article introduces the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F series.
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100C (Detection Distance: 100mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100C (Detection Distance: 100mm) Laser Sensor Standard M8 Connector Type
specification
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 Select ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250C (Detection Distance: 250mm)
Laser sensor standard type M8 connector type (detection distance 250mm)
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2 points ...
|
|
KEYENCE/KEYENCE Contact Digital Sensor GT2 Series has a withstand voltage of 1.0 MPa
Introduction: Pursuit of a general-purpose digital contact sensor that is easy to use.
peculiarity
Environmentally resistant sensor: IP67 rated housing
An error-free two-stage transformer method is designed
Simplified installation reduces total cost
Installation is simple and convenient
Simplified ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87622
Connector cable M8 straight type 2m chemical resistant
Applicable products: PR-G series
Quantity: 1
End Shape: M8 Straight - Scattered
Length: 2 m
Material: Cable: PUR, nut: Zinc nickel plating
Weight: approx. 65 g
This article introduces the KEYENCE/KEYENCE ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Ultra-Small Amplifier PR-M/F Series OP-87406
Fixing screws 45mm
Summary: Screws to fix the adjustable bracket for the LR-Z series.
Target products: LR-Z series
Length: 45 mm
Material: Bolt: Nickel Plated Copper, Nut/Washer: Nickel Plated Iron
Weight: approx. 70 g
This article introduces the KEYENCE/KEYENCE subminiature ...
|
|