Introduction: SICK RLY3-HAND100 Safety Relay Analysis Unit Weight: 130 g, Switching Current: 10 mA ... 6 A supply voltage UV: 24 V DC (16.8 V ... 30 V)。
parameter
Safety technical parameters
Safety Integrity Level: SIL3 (IEC 61508), SILCL3 (IEC 62061)
Category: Category 4 (ISO 13849-1)
Performance class: PL e (ISO 13849-1)
PFHD (Dangerous Failure Rate per Hour): 1,0 x 10-9
TM (continuous operating time): 20 years (ISO 13849-1)
Safer in the case of errors: The normally open contact is open, which means that the safety-relevant path current path is broken.
Stop Category: 0 (IEC 60204-1)
External Device Monitoring (EDM): ✔
interface
Connection type: Front plug with spring-loaded terminals
Inputs: 4 safety inputs for connection to 2 control elements (with NC and NO contacts) and 1 external device monitoring (EDM) input
Outputs: 2 path current paths (safe), 1 diagnostic output (non-safe)
Display elements: LEDs
Configuration: Connected by wiring
Electrical Parameters – Operational data
Voltage supply: PELV (Protective Extra Low Voltage) or SELV (Safe Extra Low Voltage)
Supply voltage UV: 24 V DC (16.8 V ... 30 V)
Residual ripple: ≤ 2.4 V
Power consumption: ≤ 2.5 W (DC)
Electrical Parameters – Safety Input
Quantity: 4
Input voltage: High: 24 V DC (11 V ... 30 V), low: 0 V DC (–3 V ... 5 V)
Input current: 4 mA ... 6 mA
Synchronization time (between excitation elements): ≤ 500 ms
Electrical Parameters – Safety Input (EDM)
Quantity: 1
Input voltage: High: 24 V DC (11 V ... 30 V), low: 0 V DC (–3 V ... 5 V)
Input current: 4 mA ... 6 mA
Electrical Parameter—Path current path
Response time: 10 ms
Quantity: 2
Output: N/O contact, forced guidance
Contact material: silver alloy, flash gold plating
Switching voltage: 10 V AC ... 230 V AC，10 V DC ... 230 V DC
Switching current: 10 mA ... 6 A
Total current: 12 A
Mechanical life: Switch operation 1 x 107
Overvoltage category: III (EN 60664-1)
Rated impulse withstand voltage Uimp: 6 kV (EN 60664-1)
Electrical Parameters – Diagnostic information output
Quantity: 1
Output mode: push-pull semiconductor output, short circuit protection
Output voltage: High: ≥ UV – 3 V, Low: ≤ 3 V
Input current (NPN): ≤ 15 mA
Output current (PNP): ≤ 120 mA
Mechanical parameters
Dimensions (W x H x D): 18 mm x 124.6 mm x 85.5 mm
Weight: 130 g
Environmental parameters
Enclosure rating: IP20 (IEC 60529)
Operating ambient temperature: –25 °C ... +55 °C
Storage temperature range: –25 °C ... +70 °C
Air humidity: 10 % ... 95 %, non-condensing
Interference emissions: according to IEC 61000-6-4
Immunity: according to IEC 61326-3-1, according to IEC 61000-6-2, according to IEC 60947-5-1
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
This article introduces the SICK RLY3-HAND100 safety relay analysis unit Weight: 130 g product, if you are interested in the SICK safety relay analysis unit, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
SICK/Sick cylindrical photoelectric sensor GRTE18S-P2442 Energy type
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
Diffuse LEDs for the GTB2S-P1311 SICK/SICK miniature photoelectric sensor
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK Sensor GTB6-N1212 10 V DC... 30 V DC 1)
Product Introduction
Brand: SICK
Type: Photoelectric sensor
Model: GTB6-N1212
Working principle: Diffuse photoelectric sensor
Working details: Background suppression
Maximum switching distance: 5 mm ... 250 ...
|
|
Background suppression function of the SICK WTB9-3N2461 miniature photoelectric sensor
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK miniature photoelectric sensor WTB4S-3N1362V diffuse reflector
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick cylindrical photoelectric sensor GRTE18S-P2362 Nickel-plated brass
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick miniature photoelectric sensor WTB4-3P3464 weighs 30g
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Sick Fiber Optic Sensor GLL170T-B434 Maximum tightening torque: 0.5 Nm
Parametric technology
Brand: Sick
Model: GLL170T-B434
Type: Fiber Optic Sensor
Machine model: Fiber optic sensor
Device Type Details: Stand-alone
Dimensions (W x H x D): 10 mm x 31.7 mm x 72.5 mm
Housing shape ( ...
|
|
SICK/SICK Miniature Photoelectric Sensor WTF4S-3P2462V Foreground Suppression
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK cylindrical photoelectric sensor GRTB18-P1112V, weight 175g
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
The SICK/SICK miniature photoelectric sensor WTL16P-24161120A00 weighs 50g
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick cylindrical photoelectric sensor GRL18S-P1336 retroflex type
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK Sensor GSE6-P4211 Sensing distance: 0 m ... 10 m
Product Introduction
Brand: SICK
Type: Photoelectric sensor
Model: GSE6-P4211
Working principle: through-beam photoelectric sensor
Maximum switching distance: 0 m ... 15 m
Sensing distance: 0 m ... 10 m
Polarization Filter: No
...
|
|
SICK/Sick miniature photoelectric sensor WTB4S-3P2162V single teach-in button
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK miniature photoelectric sensor WL4S-3P3432V single teach-in button
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
The SICK/SICK miniature photoelectric sensor WL12G-3O2431S51 weighs 120 g
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick cylindrical photoelectric sensor GRTB18S-N2412 Switching/dark
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick miniature photoelectric sensor WTB4S-3P2132V diffuse reflectance
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK Photoelectric Sensor GTB10-P4211 Setting: Potentiometer, 5 turns
Product Introduction
Product name: SICK Sick
Product type: small photoelectric sensor
Model: GTB10-P4211
Features:
Working principle Diffuse photoelectric sensor
How it works in more detail Background suppression
Dimensions ( ...
|
|
The SICK/Sick photoelectric sensor WTB2S-2P3010S14 axis is 640 nm long
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Contact
working hours
