Mitsubishi/Mitsubishi Electric touch screen GT2712-STBD DC24V

Introduction: Mitsubishi/Mitsubishi Electric Touch Screen GT2712-STBD TFT Color LCD Screen Storage Memory Card (ROM) 57MB, Action Memory Card (ROM) 128MB, Expansion Interface Communication Module/Option Module Installation, Class D Grounding (Class 3 Grounding), Connected to the Control Cabinet When Grounding Is Not Possible.

Mitsubishi/Mitsubishi Electric GT2712-STBD

Mitsubishi/Mitsubishi Electric GT2712-STBD

Product Details

[display part *1*2]

Display soft components: TFT color LCD screen

GT2712-STBD Picture size: 12.1 inches

GT2712-STBD resolution: SVGA: 800*600 points

Display size:246(9.685)(W)*184.5(7.264)(H) mm(inch)

Number of characters displayed:

16 dot matrix standard font: 50 words * 37 lines (full width)

12 dot matrix standard font: 66 characters * 50 lines (full width)

Display color: 65536 colors

Brightness adjustment: 32 steps

Backlight: LED (cannot be replaced)

Background light life*3: Approx. 60,000 hours (time when the ambient temperature is 25°C and the display brightness is 50%)

[Touch Screen*4]

Method: Analog resistive film method

Key size: min. 2*2 dots (per key)

Press at the same time: up to 2 points

Lifespan: more than 1,000,000 cycles (operating force 0.98N or less)

[Occupancy Sensor]

Detection distance: none

Detection temperature: yuan

[User memory capacity]

User memory capacity: Memory card (ROM): 57 MB, Memory card (ROM): 128 MB

Lifespan (number of writes): 100,000 times

[Internal Clock Accuracy] ± 90 sec/month (ambient temperature 25°C)

[battery] GT11-50BAT lithium battery, ambient temperature 25°C about 5 years (life)

[Built-in Interface]

　　RS-232

　　lch:115200/57600/38400/19200/9600/4800bps

Connector shape: D-sub9 pin (male)

　　RS-422/485

　　lch:115200/57600/38400/19200/9600/4800bps

Connector shape: D-sub9 pin (female)

Ethernet:

LCH data transmission mode: 10BASE-T/100BASE-TX

Connector shape: RJ-45 (module plug)

USB(host): Maximum transfer speed - High-Speed 480Mbps interface shape: USB-A

2ch (front / back) (GT2712-STBA, GT2712-STBD)

lch (rear) (GT2712-STWA, GT2712-STWD)

USB (device): Max transfer speed - High-Speed 480Mbps Interface shape: USB Mini-B

lch (front) (GT2710-STBA, GT2710-STBD, GT2710-VTBA, GT2710-VTBD)

lch (rear) (GT2710-VTWA, GT2710-VTWD)

SD card: lch supports SDHC (up to 32GB)

Expansion interface: for communication module/option module installation

Extended auxiliary interface: for option module installation

Side interface: for communication module installation

Buzzer output: single tone (interval and length can be adjusted)

POWER LED: Illuminated color: 2 colors (blue, orange)

Protective structure: front: IP67F*5 cabinet: IP2X

GT2712-STBD Dimensions: 316(12.44)(W)*246(9.55)(H)*52(2.05)(D) mm(inch)

GT2712-STBD Panel Opening Size/GT2712-STBD Hole Size: 302(11.89)(W)*228(8.98)(H) mm(inch)

Weight (except mounting accessories): 2.4KG

GT2712-STBD input power supply DC24V

Supply voltage: DC24V (+25%, -20%)

Power consumption:

At maximum load: 45W or less

Monomer: 18W or less

When the background light is off: 8W or less

Inrush current: 5A or less (at 2ms, ambient temperature 250C, maximum load)

Allowable instantaneous stop time: less than 10ms

Noise tolerance: noise simulator with noise voltage of 1500Vp-p, noise amplitude of 1μs, and passing noise frequency of 25-60Hz

Withstand voltage: AC350V between power terminal and ground for 1 minute

Insulation resistance: DC500V between the power terminal and the ground wire passes through the insulation resistance table 10MΩ or more

Applicable wire size: 0.75mm2-2mm2

Applicable crimp terminals: Crimp terminals for M3 bolts RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A

Suitable tightening torque (terminal bolt in terminal strip): 0.5N.m - 0.8N.m

Convenient ambient temperature*1: 0°C-55°C*2

Storage ambient temperature: -20-60 °C

Ambient humidity: 10%RH - 90%RH, no condensation*2

Storage environment humidity: 10%RH - 90%RH, no condensation*2

Anti-vibration: JIS B 3502, IEC61131-2

When there is intermittent vibration:

Frequency (5-8.4Hz); acceleration (none); Unilateral amplitude (3.5mm); Number of scans (10 in each X, Y, Z direction)

Frequency (8.4 - 150Hz); acceleration (9.8m/s2); unilateral amplitude (none); Number of scans (10 in each X, Y, Z direction)

When there is continuous vibration:

Frequency (5-8.4Hz); acceleration (none); Unilateral amplitude (1.75mm); Number of Scans (None)

Frequency (8.4 - 150Hz); acceleration (4.9m/s2); unilateral amplitude (none); Number of Scans (None)

Shock resistance: JIS B 3502, IEC 61131-2 147m/s2(15G) X, Y, Z 3 times each

Environment: no fumes, corrosive gases, flammable gases, general dust is not serious and no direct sunlight (the same when stored)

Altitude *3: 2000m or less

Installation site: in the control cabinet

Overvoltage Category*4: II. or less

Pollution degree*5:2 or less

Cooling method: self-cooling

Grounding: Ground type D (type 3 grounding), connected to the control cabinet when grounding is not possible

This article introduces Mitsubishi/Mitsubishi Electric touch screen GT2712-STBD DC24V products, if you are interested in Mitsubishi/Mitsubishi Electric touch screen, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

Mitsubishi/Mitsubishi Electric touch screen GT2712-STBD DC24V

Sections viewed

Contact

working hours