Introduction: AIRTAC LSH series standard linear slide rail 30, front combination X-type (45° -45°) arc raceway groove design, so that it has the ability of automatic self-alignment, even if there is a little error on the mounting surface, it can be maintained by the internal absorption well of the slider smooth and stable linear motion.
Features:
The 4-row ball is designed with a 45° contact angle with the raceway, which achieves an ideal two-point contact, can withstand positive and negative forces from the radial and lateral directions, and can also apply pre-pressure if necessary to increase the rigidity. The combined height of the slider and slide rail has been reduced, and the length of the slide has been shortened and miniaturized.
Due to the strict control of manufacturing accuracy, the dimensional accuracy can be maintained within a stable tolerance range, and the slider has a cage design to prevent the steel ball from falling, so the slider can be arbitrarily assembled on the same type of slide rail when assembling the interchangeable type line rail, and maintain its smoothness, preload and accuracy.
Product parameters
Hole spacing (P): 60mm
Standard hole margin (S): 20mm
**Small customer margin (S/Emin) Note]: 7mm
**Large Margin (S/Emax) [Note]: 53mm
Standard hole margin**Large length: 4000mm
**Large length (Lmax): 4000mm
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
If you are interested in AIRTAC LSH Series Standard Linear Slide 30, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Airtac/AirTAC DPS Series Digital Display Pressure Switch Red/Green
Product introduction: Digital pressure switch, also known as intelligent pressure switch, is an intelligent high-precision pressure control equipment integrating pressure measurement, display and control. On the basis of the conventional digital pressure switch, ACCEL has added IO-Link interface to the digital pressure switch, which supports IO-L...
|
|
AirTAC Solenoid Valve 3V308 Pipe Diameter PT1/4
Introduction: Airtac Solenoid Valve 3V308
Features:
Direct-acting normally closed type, commutation sensitive;
No need for lubrication;
It can be integrated with multiple valves to save installation space;
Equipped with manual device, which is conducive to installation and commissioning;
There are a variety of standard ...
|
|
AirTAC integrated valve CPV10SB working medium air
Introduction: Airtac integrated valve CPV10SB
Features:
The solenoid valve is integrated into the valve group to unify the intake, exhaust and power supply (25pinD-Sub) to save space and reduce the number of additional accessories that need to be purchased.
The solenoid valve is equipped with a manual switch function, which is conducive to installation and adjustment.
...
|
|
AirTAC solenoid valve 2ST050-10 cv value 0.83
Introduction: Airtac Solenoid Valve 2ST050-10
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The pressure range is wide, including ultra-high pressure type (X), high pressure type (H), standard type, large flow type (L), extra-large flow type (T) ...
|
|
AirTAC Pneumatic Valve 4A430E-15 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 4A430E-15
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-head two-position air control with memory function;
The inner bore adopts special ...
|
|
AirTAC Fluid Control Valve 2LH030-06 Weight 300g
Introduction: AIRTAC fluid control valve 2LH030-06 has a wide range of pressures, and high-pressure type (H) and standard type are available
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
Wide range of pressure, high pressure type (H), standard ...
|
|
AIRTAC NRV Series Check Valve NRV06 Compact POM Injection Molding
Product introduction: Only allow the air flow to flow in one direction and not in the opposite direction; It is used to prevent the reverse flow phenomenon caused by the drop in pressure of the air source or the pressure drop caused by the increase in air consumption; Large effective circulation area; The internal valve core is made of POM injection molding, and the valve port is rubber sealed.
|
|
AirTAC Fluid Control Valve 2W200-20 Weight 950g
Introduction:Airtac fluid control valve 2W200-20, piston pilot normally closed two-port two-position solenoid valve, rapid reversing and large flow rate
Features:
Piston pilot normally closed two-port two-position solenoid valve, rapid reversing and large flow rate:
Compact structure, small size, heavy ...
|
|
AirTAC Regulator SDR100M5 Tube diameter M5
Introduction: AirTAC pressure regulator SDR100M5
Features:
Piston back pressure structure, simple and compact, cost-effective, easy to install and use;
The voltage regulation range is wide, and in addition to the standard type, there are also low-pressure types available.
The output pressure is stable, mainly used for ...
|
|
AirTAC Pneumatic Valve 3A210-06 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 3A210-06
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC solenoid valve base 100M
Introduction: Airtac solenoid valve base 100M
Features:
The same series of directional control valves can be integrated into the valve group, saving space and cost;
Unified intake, exhaust, unified wiring, easy to find when there is a fault;
Flexible and expandable ...
|
|
AirTAC 4M Series 2/5-way Solenoid Valve 4M21008A
Introduction: Airtac 4M Series 2/5-way Solenoid Valve 4M21008A
Features:
Inner Day Pilot Knot:
Sliding column structure, good sealing, flexible response;
The double-head two-position solenoid valve has a memory function:
The inner hole is added by a special process.
|
|
AirTAC Solenoid Valve 2S050-10 cv value 0.83
Introduction: Airtac Solenoid Valve 2S050-10
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The pressure range is wide, including ultra-high pressure type (X), high pressure type (H), standard type, large flow type (L), extra-large flow type (T) ...
|
|
AirTAC Induction Check Valve PCV15 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Induction Check Valve PCV15
Features:
safety circuit for pressure holding;
The cylinder stops positioning instantaneously;
Special circuit design applications;
The new pilot port cannula type can effectively save safety space and improve safety efficiency
...
|
|
AIRTAC 4M Series Solenoid Valve G3/8mm
Introduction: AIRTAC/AirTAC 4M series solenoid valve sliding column structure, good sealing, sensitive response; The double-head solenoid valve has a memory function; The inner hole adopts special processing technology, which has low friction resistance, low starting air pressure and long service life; Side-mounted face mounting, direct connection to actuators ...
|
|
AirTAC Solenoid Valve 4V410-15 is guaranteed to withstand pressure of 1.2MPa
Introduction:AirTAC solenoid valve 4V410-15, the inner hole is processed by special technology, the friction resistance is small, the starting air pressure is low, and the service life is long
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, anti-...
|
|
AIRTAC/AirTAC 3V2M Series Solenoid Valve Three-way two-position
Introduction: AIRTAC/AirTAC 3V2M series solenoid valve direct-acting structure, reversing sensitive; The combination is flexible and expandable, and the number and type of connected solenoid valves can be arbitrarily combined or expanded; Coaxial cut-off structure, good sealing, large flow rate; No need for lubrication; Dedicated base ...
|
|
AirTAC Solenoid Valve 2WT050-06 Flow orifice diameter 3mm, 3
Introduction: Airtac Solenoid Valve 2WT030-06
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The pressure range is wide, including ultra-high pressure type (X), high pressure type (H), standard type, large flow type (L), extra-large flow type (T) ...
|
|
AirTAC Pneumatic Valve 3A310-08 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 3A310-08
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC Fluid Control Valve 2WL050-15 cv value 1.4
Introduction: AirTAC Fluid Control Valve 2WL050-15
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The pressure range is wide, including ultra-high pressure type (X), high pressure type (H), standard type, large flow type (L), extra-large flow type ( ...
|
|
Contact
working hours
