Introduction: AIRTAC LSD series low-installation linear slide LSD30, the front combination of X-type (45° -45°) arc raceway groove design, so that it has the ability of automatic alignment, even if there is a little error on the installation surface, it can also be maintained by the internal absorption well of the slider smooth and stable linear motion.
Features:
The 4-row ball is designed with a 45° contact angle with the raceway, which achieves an ideal two-point contact, can withstand positive and negative forces from the radial and lateral directions, and can also apply pre-pressure if necessary to increase the rigidity. The combined height of the slider and slide rail has been reduced, and the length of the slide has been shortened and miniaturized.
Due to the strict control of manufacturing accuracy, the dimensional accuracy can be maintained within a stable tolerance range, and the slider has a cage design to prevent the steel ball from falling, so the slider can be arbitrarily assembled on the same type of slide rail when assembling the interchangeable type line rail, and maintain its smoothness, preload and accuracy.
Product parameters
Hole spacing (P): 60mm
Standard hole margin (S): 20mm
**Small customer margin (S/Emin) Note]: 7mm
**Large Custom Product Margin (S/Emax) [Note]: 73mm
Standard hole margin**Large length: 3960mm
**Large length (Lmax): 4000mm
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
If you are interested in AIRTAC LSD series low installation linear slide LSD30, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience. |
More on that
|
AirTAC 4V Series 2/5-Way Solenoid Valve 4V31010B Interface Diameter PT3/8
Introduction: AIRTAC 4V Series 2/5-way Solenoid Valve 4V31010B
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve has three central functions for ...
|
|
AIRTAC CM3 Series Mechanical Valve CM3-05 External control
Product introduction: CM3 series is manual operation, a variety of structure and shape control heads, convenient for use under different conditions; Cut-off structure, good sealing, flexible reversing, no need for oil lubrication; Multi-position installation, easy to install and use; The control head is made of metal, which has a long service life and is more reliable and stable;
...
|
|
AirTAC Solenoid Valve 3V2M Tube Diameter PT1/8
Introduction: AIRTAC Solenoid valve 3V2M, coaxial truncated structure, good sealing, large flow rate; No need for lubrication
Features:
Direct-acting structure, sensitive reversing; Normally closed and normally open are available;
Coaxial cross-sectional structure, good sealing, large flow rate; ...
|
|
AirTAC Pneumatic Valve 3A310-10 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 3A310-10
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC 2V Series 2/2-Way Fluid Control Valve 2V025-06
Introduction: Airtac 2V Series 2/2-Way Fluid Control Valve 2V025-06
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The structure is light and compact;
The body is made of brass, and the solenoid coil is rated B ...
|
|
AirTAC Pneumatic Valve 3A320-10 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 3A320-10
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC Pneumatic Valve 3A320-08 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 3A20-08
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC Fluid Control Valve 2WA200-20 Weight 735g
Introduction: AirTAC fluid control valve 2WA200-20
Features:
Piston pilot normally closed two-port two-position solenoid valve, rapid reversing and large flow rate:
Compact structure, small size, light weight, easy to assemble and disassemble;
Coil protection grade IP65, power connection ...
|
|
AirTAC Pneumatic Control Valve 5A410-15 has a maximum actuation frequency of 3 seconds/time
Introduction: AirTAC Pneumatic Control Valve 5A410-15, sliding column structure, good sealing, sensitive response; The three-position pneumatic valve is available with three intermediate functions; Double-head two-position air control with memory function;
Features:
Sliding column structure, good sealing, sensitive response; ...
|
|
AirTAC Pneumatic Valve 3A110-M5 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Pneumatic Control Valve 3A110-M5
Features:
Slide column structure, good sealing, sensitive response,
Double-headed air control has memory cutting energy,
The inner hole is processed by special technology, which has low friction resistance, low starting air pressure and long service life;
...
|
|
AirTAC Pneumatic Control Valve 3A120-06 Pipe caliber PT1/8
Introduction: AirTAC Pneumatic Control Valve 3A120-06
Features:
Slide column structure, good sealing, sensitive response,
Double-headed air control has memory cutting energy,
The inner hole is processed by special technology, which has low friction resistance, low starting air pressure and long service life;
...
|
|
AirTAC Solenoid Valve 4V330C-08 Guaranteed pressure resistance of 1.2MPa
Introduction: AirTAC solenoid valve 4V330C-08
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve is available with three central functions;
...
|
|
AirTAC Pneumatic Valve 3A310-08 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 3A310-08
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
AirTAC Pneumatic Valve 4A130P-M5 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Pneumatic Control Valve 4A130P-M5
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-headed two. Position air control has a memory function;
The inner bore adopts a special ...
|
|
AirTAC Pneumatic Valve 4A230C-08 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 4A230C-08
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function;
The inner hole is processed by special technology, and the friction resistance has a long service life;
No need for lubrication;
...
|
|
Airtac LSH Series Standard Linear Slide 25 Standard Hole Margin 20mm
Introduction: AIRTAC LSH series standard linear slide rail 25, front combination X-type (45° -45°) arc raceway groove design, so that it has the ability of automatic self-alignment, even if there is a little error on the installation surface, it can be maintained by the internal absorption well of the slider smooth and stable linear motion.
...
|
|
AirTAC Solenoid Valve 4V410-15 is guaranteed to withstand pressure of 1.2MPa
Introduction:AirTAC solenoid valve 4V410-15, the inner hole is processed by special technology, the friction resistance is small, the starting air pressure is low, and the service life is long
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, anti-...
|
|
AIRTAC/AirTAC 3V2M Series Solenoid Valve Three-way two-position
Introduction: AIRTAC/AirTAC 3V2M series solenoid valve direct-acting structure, reversing sensitive; The combination is flexible and expandable, and the number and type of connected solenoid valves can be arbitrarily combined or expanded; Coaxial cut-off structure, good sealing, large flow rate; No need for lubrication; Dedicated base ...
|
|
AirTAC Fluid Control Valve 2KSH050-10 cv value 0.34
Introduction: AirTAC Fluid Control Valve 2KSH050-10
Features:
Direct-acting normally open two-port two-position solenoid valve, fast and sensitive reversing;
The pressure range is wide, and there are ultra-high pressure type (X), high pressure type (H), standard type, and large flow type (L) to choose from;
...
|
|
AirTAC Solenoid Valve 5V320-08 The maximum actuation frequency is 5 seconds/time
Introduction: AirTAC solenoid valve 5V320-08, low power consumption, high working frequency; No need for lubrication; Terminal-type power connection mode, pilot airflow centralized internal discharge, suitable for pollution-free and other workplaces with special needs
Features:
Low power consumption and high working frequency; No need to add ...
|
|
Contact
working hours
