Balluff condition monitoring sensors detect different physical parameters – such as vibration, temperature, air humidity and air pressure – and then process them and provide the required data to higher-level systems via IO-Link. The sensor can be easily parameterized via the standardized IO-Link protocol, and the analysis in the sensor can be individually adapted to your specific application conditions. Thanks to the flexible process data structure, up to five measured or pre-processed data can be freely configured and reincycled.
Our condition-based sensors make a substantial contribution to the efficient and trouble-free operation of each plant and thus significantly increase the efficiency of the entire plant.
Vibration, temperature, relative humidity, ambient air pressure IP67
Condition monitoring is mostly based on machine learning, enabling real-time maintenance to avoid unplanned downtime.
It can also enable the Industrial Internet of Things (IIoT), where the status of machines, plants, and related components is recorded, processed, and interpreted.
peculiarity
A variety of powerful features
Four measurements can be made with one device: vibration, temperature, relative humidity and ambient air pressure.
Quick integration and easy to use
Compact but not complicated: The rugged stainless steel housing (IP67/ IP69K) is ideal for confined spaces in harsh environments. Quick and easy configuration via IO-Link. Compliant with the ISO 10816 standard, it is easy to determine the health status of the machine.
Intelligent preprocessing of data
Equipped with data pre-processing, intelligent decision-making can be made without the need for additional external processors.
Functions Vibration Speed, Vibration Acceleration, Vibration Severity Zone, Contact Temperature, Sensor Self-Monitoring
Vibration, frequency range 2... 3200 Hz
Vibration, measuring the number of axes 3
Vibration speed, measuring range RMS 0... 220 mm/s @79.4 Hz
Vibration acceleration, measuring range RMS 0... 16 g
Contact temperature, measuring range 0... 70 °C
Relative air humidity, measuring range 5... 95 %rF
Ambient pressure, measuring range 300... 1100 hPa
Measure the operating voltage Ue DC 24 V
Interface IO-Link 1.1
Adjustment Methods, Interfaces Flexible process data configuration, Vibration measurement according to ISO 10816-3, Data pre-processing (statistics), Events (pre-alarm vs. major alarm), Alarm delay time, Lookup function with LED indicator (Ping)
Interface Cable and connector, M12x1 male, 3-pin, 1.5 m, PUR
Housing material: Stainless steel (1.4404), Diaphragm: ePTFE with nylon fabric
Degree of protection IP67
Ambient temperature 0... 70 °C
|
More on that
|
BALLUFF photoelectric sensors BOD001M Ub13~30 VDC
Description: The BALLUFF photoelectric distance sensors are housed in a rugged plastic or metal housing, with analog current and voltage outputs, as well as a digital serial or IO-Link interface with IP65/67 and IP69K protection and are therefore suitable for use in harsh environments.
...
|
|
BALLUFF sensors BES00TL
Our standard BES inductive sensors for the detection of conductive metal objects are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
Cylindrical sensors ranging from M5 to M30 are designed ...
|
|
Baluff Inductive Standard Sensors BES00MF
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This global ...
|
|
Balluff inductive sensors BES0153 Switching frequency 500 Hz
Description: BALLUFF inductive sensors are ideal for object detection in metal areas, they are resistant to short circuits and non-contact operation, i.e. they are wear-free and extremely resistant to dirt. The sensors are available in a variety of sizes from hexahedral configurations with diameters from 3 mm to 80 × 80 mm. Powerful...
|
|
BALLUFF sensors BES02HP
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This global ...
|
|
BALLUFF sensors BES013J
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This application is applied to the global ...
|
|
BALLUFF sensors BES01YE
Balluff sensor BES01YE dimensions: 16 x 8 x 4.7 mm
Structure: 16x8x4.7
Installation: flush
Range: 1.5 mm
Switching output: PNP NO contact (NO)
Switching frequency: 2500 Hz
Housing material: PA 6, GF30
Effective surface, material ...
|
|
Capacitive sensors from Balluff BCS00HK 100 Hz
Introduction: Capacitive sensors from BALLUFF for object detection have a linear electric field. They can detect wafers, printed circuit boards, cardboard, stacks, bottles, blocks and sheets through the walls or pipes of containers made of glass and plastic (up to 4 mm thick).
|
|
BALLUFF sensors BES0269
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This global ...
|
|
Baluff inductive standard sensor with preferred BES05YE
Our standard inductive sensors are ideal for object detection in metal areas. Short-circuit-resistant and non-contact operation, i.e. wear-free and very dirt-resistant. The sensors are available in a variety of sizes from hexahedral configurations with diameters from 3 mm to 80 × 80 mm.
Powerful and reliable ...
|
|
BALLUFF Inductive Sensor BES05WF Structure D6.5
Introduction: Inductive sensors are short-circuit-resistant and non-contact operation, i.e. wear-free and extremely resistant to dirt. The sensors are available in a variety of sizes from hexahedral configurations with diameters from 3 mm to 80 × 80 mm. Robust and reliable inductive Global sensors offer you a particularly economical solution ...
|
|
BALLUFF sensors BES01AK
Dimensions Ø 8 x 45 mm
Structure M8x1
Install flush
Range 1.5 mm
Switching output PNP NO contact (NO)
Switching frequency 5000 Hz
Housing material: Stainless steel
Induction surface, material PBT
Interfaces Cables & Connectors, M8 ...
|
|
BALLUFF sensors BESO0M5
Balluff sensors BESO0M5 dimensions: Ø 3 x 27 mm
Structure: D3.0
Installation: flush
Range: 1 mm
Switching output: PNP NO contact (NO)
Switching frequency: 3500 Hz
Housing Material: Stainless steel
Effective surface, material: PBT
Pick up...
|
|
BALLUFF photoelectric sensor BOS0286 range of action 8 m
Introduction: Balluff proximity sensors identify objects based on surface, color and material. Therefore, the detection range is determined by the size, shape, color, and characteristics of the reflective surface of the target. The transmitter and receiver are located in the same housing, so the diffuse sensing ...
|
|
BALLUFF sensors BES0084
Balluff sensors BES0084 dimensions: Ø 18 x 55 mm
Construction: M18x1
Installation: flush
Range: 5 mm
Switching output: PNP NO contact (NO)
Switching frequency: 2000 Hz
Housing material: Brass, nickel-free coating
Induction surfaces, ...
|
|
BALLUFF sensors BES04TW
Our standard BES inductive sensors for the detection of conductive metal objects are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
peculiarity
Cylindrical designs ranging from M5 to M30 ...
|
|
The Balluff BES05UA preferred type of inductive standard sensor
Our standard inductive sensors are ideal for object detection in metal areas. They have short-circuit protection and contact-free operation, so they are wear-free and very resistant to dirt and contamination. Sensors are available in configurations ranging from 3 mm Ø to 80 × 80 mm square sizes.
Rugged and reliable ...
|
|
BALLUFF sensors BES004E
Balluff sensor BES004E Dimensions: Ø 12 x 48 mm
Construction: M12x1
Mounting: Not flush
Range: 8 mm
Switch output: NPN NO contact (NO)
Switching frequency: 1000 Hz
Housing material: Brass, nickel-free coating
...
|
|
The Baluff inductive sensor BES02AC not flush mounted
Description: BALLUFF inductive sensors are ideal for object detection in metal areas, they are resistant to short circuits and non-contact operation, i.e. they are wear-free and extremely resistant to dirt. The sensors are available in a variety of sizes from hexahedral configurations with diameters from 3 mm to 80 × 80 mm. Powerful...
|
|
BALLUFF sensors BES01LJ
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This global ...
|
|
Contact
working hours
