Introduction: JAKA Ai series collaborative robots adopt the product design principle of S³ (Smart, Simple, Small), which is extremely innovative, integrating robot technologies such as wireless teaching, graphical programming, and visual safety protection, which innovates the interaction between humans and robots, improves the safety of human-computer collaborative interaction, and greatly reduces the threshold for the use of robots. At the same time, the new generation of integrated collaborative robotic arm has been deeply integrated with vision to ensure the natural interaction and autonomous adaptation between robots, humans and the working environment, which has significantly broadened the application boundary of robots.
Product parameters
Payload : 12kg
Weight (including cable): 41kg
Working radius: 1327mm
Repeatability: ±0.03mm
Degrees of freedom: 6
Programming: graphical programming, drag-and-drop programming
Teach pendant type: mobile terminal (PAD/mobile phone) APP
Collaborative operation: Collaborative operation according to GB 11291.1-2011
Certification: CR certification, CE certification, 15066 certification
The maximum speed of the robotic arm working range
Joint 1: ± 360° 120°/s
Joint 2: -85°, +265° 120°/s
Joint 3: ±175° 120°/s
Joint 4: -85°, +265° 180°/s
Joint 5: ± 360° 180°/s
Joint 6: ± 360° 180°/s
Maximum speed of the tool end: / 3m/s
Power consumption: 500W
Temperature range: 0-50°C
IP rating: IP54
Robot installation: installation at any angle
Tool I/O port: Digital input 2 / digital output 2 / analog input 1
Tool I/O power supply: 24V
Base diameter 188mm
Material: aluminum alloy, PC
Tool I/O size: M8
Robot connection cable length: 6m
Camera size: 67×57×45mm(L×W×H)
Communication interface: Ethernet interface (TCP/IP protocol)
Trigger mode: soft trigger
Pixels: 500W
Resolution: 2592(H) ×1944(V)
Frame rate: 14FPS
Lens focal length: 8mm
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the JAKA Ai 12 lens focal length 8mm product, if you are interested in the JAKA cobot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
JAKA Ai 7 has a base diameter of 158 mm
Introduction: JAKA Ai series collaborative robots adopt the product design principle of S³ (Smart, Simple, Small), the ultimate innovation, the integration of wireless teaching, graphical programming, visual safety protection and other robot technologies, innovative interaction between humans and robots, improve the human-machine collaboration ...
|
|
JAKA C5 Collaborative Robot Electric Control Cabinet
IP rating: IP44
Cabinet I/O port 16 digital inputs and outputs, 2 analog inputs or outputs
The I/O power supply of the electric control cabinet is 24V
Communication mode: TCP/IP, Modbus TCP, Modbus RTU
Power supply 100-240VAC, 50-60Hz
Dimensions 410×307×235 (mm ...
|
|
JAKA Pro 12 cobot
High protection level: stronger environmental adaptability (body IP68), meeting the requirements of higher protection level of industrial application scenarios;
High reliability: Maintenance-free integrated joint design that realizes long-term high-precision maintenance;
Adaptable: small footprint, easy to deploy, covering 5-16kg load ...
|
|
JAKA C7 6-axis collaborative robot JAKA C7 weighs 22kg and consumes 350W power
Introduction: JAKA C series cobots have a more distinctive style, higher cost performance and excellent comprehensive performance, using a new "pearl white" fashion appearance color, continuing the core technology of the cobot of the car, with wireless teaching, drag programming, collision detection and other functions, but also suitable for ...
|
|
JAKA 6-axis collaborative robot JAKA Zu 18s weighs 35.3kg
Description: The JAKA Zu 18s cobot is equipped with an industrial-grade force sensor (integrated force control sensor at the end or base of the robot); There is no need to install safety fences, and it is compatible with people, robots, and the surrounding environment. Provide better human-computer interaction experience and security assurance; Provide constant force, ...
|
|
JAKA Collaborative Robot JAKA Ai 5 Payload 5kg Pixel 500w
Introduction: JAKA Ai 5 collaborative robot adopts S³ (Smart, Simple, Small) product design principles, the ultimate innovation, the integration of wireless teaching, graphical programming, visual safety protection and other robot technologies, innovative human-robot interaction mode, improve the human-machine collaboration ...
|
|
JAKA 6-axis collaborative robot JAKA Zu 7s weighs 22.3kg
Introduction: The JAKA Zu 7s cobot is equipped with an industrial-grade force sensor (integrated force control sensor at the end or base of the robot); Provide better human-computer interaction experience and security assurance; Provide a variety of force control solutions such as constant force, normal tracking, and speed mode.
...
|
|
The JAKA Zu 3s has a collision detection accuracy of 10N
Introduction: The JAKA Zu 3s cobot is equipped with an industrial-grade force sensor (a force control sensor is integrated at the end or base of the robot); The weight is 12.3kg, the load is 3kg, and the working radius reaches 626mm.
|
|
JAKA cobot Jaka zu 7 with 7 kg payload and 819 mm arm span
Introduction: The JAKA Zu 7 collaborative robot weighs 22kg, the load is 7kg, and the working radius reaches 819mm; High load-to-weight ratio, cost-effective, higher applicability, taking into account flexibility, lightness and large load; There is no need to install safety fences, and it is compatible with people, robots, and the surrounding environment.
...
|
|
JAKA MiniCobo Robot
JAKA MiniCobo robot, weight 9.4kg, load 1kg, working radius up to 580mm;
The integrated intelligent drive module is adopted, which achieves lightweight design and superior performance.
The appearance is small and exquisite, the operation is simple and intuitive, low noise, and high cost performance.
Recommended ...
|
|
The positioning accuracy of the JAKA Zu 18 is ±0.03mm
Introduction: JAKA Zu 18 collaborative robot weighs 35kg, loads 18kg, and has a working radius of 1073mm; Integrated joint design, easy to assemble and disassemble; High load, cost-effective, and high collaboration security; There is no need to install safety fences, and it is compatible with people, robots, and the surrounding environment.
|
|
JAKA Pro 16 cobot
High protection level: stronger environmental adaptability (body IP68), meeting the requirements of higher protection level of industrial application scenarios;
High reliability: Maintenance-free integrated joint design that realizes long-term high-precision maintenance;
Adaptable: small footprint, easy to deploy, covering 5-16kg load ...
|
|
The positioning accuracy of the JAKA Zu 5s is ± 0.02mm
Introduction: The JAKA Zu 5s cobot is equipped with industrial-grade force sensors (integrated force control sensors at the end or base of the robot); The weight is 23kg, the load is 5kg, and the working radius reaches 954mm; Provide better human-computer interaction experience and security assurance; Provides constant force, normal tracking, and velocity ...
|
|
JAKA cobot JAKA Zu 3 with a payload of 3 kg and an arm span of 626 mm
Introduction: JAKA Zu 3 collaborative robot integrated joint design, easy to assemble and disassemble; Small and lightweight, it can adapt to small space installation, high-precision density requirements of handling and assembly, etc.; There is no need to install safety fences, and it is compatible with people, robots, and the surrounding environment.
...
|
|
JAKA collaborative robot JAKA Zu 5 with a payload of 5 kg and an arm span of 954 mm
Introduction: The JAKA Zu 5 collaborative robot is small, lightweight, and weighs 23kg, with a load of 5kg and a working radius of 954mm. Flexibility: Rapid deployment, which can save staff time and optimize overall productivity; Strong adaptability: to meet the needs of lightweight operations, such as loading and unloading, testing, loading...
|
|
JAKA electric control cabinet
Model JAKA MiniCab
Input power DC30 - 60V
Input current ≤40A
Electric control cabinet size 180×128×47(mm)(L×W×H)
IP rating: IP20
I/O port of electric control cabinet: 7-way port; The input and output are configurable
I/O power supply DC24V
Installation ...
|
|
JAKA C5 collaborative robot
JAKA C series cobots have a more distinctive style, higher cost performance and excellent comprehensive performance, using a new "pearl white" fashion appearance color, continuing the core technology of the cobot with a saving card, with wireless teaching, drag programming, collision detection and other functions, but also adapted to force control ...
|
|
JAKA C7 collaborative robot
JAKA C series cobots have a more distinctive style, higher cost performance and excellent comprehensive performance, using a new "pearl white" fashion appearance color, continuing the core technology of the cobot with a saving card, with wireless teaching, drag programming, collision detection and other functions, but also adapted to force control ...
|
|
JAKA MiniCobo collaborative robot
JAKA MiniCobo collaborative robot, weight 8.7kg, load 1kg, working radius up to 576mm;
The integrated intelligent drive module is adopted, which achieves lightweight design and superior performance.
The appearance is small and exquisite, the operation is simple and intuitive, low noise, and high cost performance.
Push...
|
|
Sectional/JAKA Industrial Integrated Camera JAKA Lens 2D Pixel 500W
Introduction: JAKALens2D integrated camera adopts 2D high-resolution industrial camera, and is equipped with a special light source module and optional camera lens to provide users with comprehensive functions and experience of 2D vision. Professionally designed by industry, it is compact and lightweight, with a sophisticated appearance, which can be fixed externally ...
|
|
Contact
working hours
