Summary: The Emparro67 power supply unit is designed for field applications. They are durable enough to withstand even the most extreme environmental conditions. The Emparro67 can be installed directly near the load where the 230 V AC to 24 V DC conversion occurs, thus significantly reducing power losses and lowering energy costs. Another benefit is that you can use a smaller control cabinet.
Features:
Low power consumption
Up to 94.2% efficiency
Active PFC
The ambient temperature is up to 85°C
Rugged, fully encapsulated IP67 enclosure
Safe access installation even under full load
Flat, compact design
Product parameters
Standards: IEC 61010-2-201, EN 61204-3, EN 55022 B, EN 61000-3-2
Relative humidity: 4 ... 100％
Protection: IP67
Efficiency: 91.6% (115 V AC); 92.8% (230 VAC)
Mean time between failures: 430 000 hours
Installation: 6-hole screw mounting
Dimensions H×W×D: 216×110×53 mm
Temperature range: -25 ... + 50 ° C ,... + 80 ° C derating (storage temperature -25 ... + 85 °C)
output
Output voltage: 24 V DC (SELV), ±1%; 24 … 28 V adjustable
Output Current: Maximum. 8 A max. (per channel), 10 A (total)
Number of channels: 2× MICO (overcurrent protection device)
Power failure bridging time: 20 ms (230 VA)
Ripple: maximum. 10 mV eff/rms
Spikes: Maximum. 150 mV ss / pp
Unit Protection: Short Circuit, Overload and Temperature
LED Display: LED (Green): Normal; LED (red): Overload, overheat, or short circuit
Parallel/Serial Use: No
input
Input voltage: 90 ... 265 VAC / 90 ... 265 volts DC
Input current: 1.2 A (240 VAC)
Inrush current after 1 ms: maximum. 5.9 A (230 VAC)
Power factor: 0.88 (230 VAC)
Frequency: 50 ... 60 Hz
Input fuse (internal): 6.3 A(T)
This article introduces the Moore/Murr EMPARRO67 hybrid power supply 85678 1 phase 2 channel products, if you are interested in Moore/Murr power supply, also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
Moore/Murr switching power supply 85135 current 10A
Introduction: MURR/MURR switching power supply 85135, package and compact design, with high resistance to vibration and shock, large overvoltage resistance to prevent voltage peaks such as lightning strikes nearby
Features:
Input: 90...132 V AC/173...264 V AC
Output:...
|
|
Murr/Murr MAN power supply 85350 size 83×84×124 mm
Introduction: Moore MEN series single-phase or two-phase compact filter power supply, this kind of power supply has contact protection function, in the secondary AC circuit has a maximum output fuse of 7.5A, the input voltage is 110/230V AC, 230/400V AC ±15V, the output voltage is 24V DC
...
|
|
Murr/Murr power supply 85676 current 10A
Introduction: Moore/Murr Power Supply 85676
Features:
Emparro®67 Hybrid
2× MICO 7/8" IOL
5 cores
Current: 10 A
INPUT: 90… 265 V AC/90… 265 V DC
OUTPUT: 24… 28 V DC
...
|
|
The Moore/Murr switching power supply module 85135 is IP20 protected
Introduction: MURR/MURR switching power supply module 85135
Features:
INPUT: 90...132 V AC/173...264 V AC
OUTPUT: 23...28 V DC
Current: 10 A
Product parameters
Installation: DIN-rail mounting TH35 (EN ...
|
|
Moore/Murr EMC Suppressor Module 26673
Introduction: Moore/Murr EMC Suppressor Module 26673
Features:
230 V AC/DC
VDR
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 110... 253 V AC/DC
Material: Flame retardant plastic Basis ...
|
|
Murr/Murr NLS Power 8985361 Output rating 60W
Introduction: The MURR/MURR NLS power supply 8985361, these units are not only extremely reliable, but also very efficient due to their integrated backup power supply. At the same time, they do not require much space in the cabinet.
Features:
Current: 2.5 A
Output Rating ...
|
|
Moore/Murr Output Relay 51620 Minimum load current 100mA
Description: The Moore/Murr output relay 51620 is very compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Murr/Murr NLS power supply 85929 current 20A
Introduction: The Moore/Murr NLS power supply 85929, these units are not only extremely reliable, but also very efficient due to their integrated backup power supply. At the same time, they do not require much space in the cabinet.
Features:
Current: 20 A
Output rating: 4 ...
|
|
The Moore/Murr MKN single-phase power supply 85615 has an input current of approx. 20 mA
Introduction: Moore MKN series single-phase power supply, its output voltage is stable, with short circuit, overload protection and contact protection, linear voltage regulation and low power, in line with EN61558 standards, DIN-rail installation, in line with EN 50022 standard.
...
|
|
The Murr/Murr NLS power supply 85403 has a maximum output current of 4A
Introduction: The Moore/Murr NLS power supply 85403, these units are not only extremely reliable, but also very efficient due to their integrated backup power supply. At the same time, they do not require much space in the cabinet.
Features:
Current: 4 A
Output Rating: 96 ...
|
|
Murr/Murr Power Supply 85051 Current 3A
Introduction: The MURR/MURR power supply 85051, packaged and compact design, has high resistance to vibration and shock, and a large overvoltage resistance prevents voltage peaks such as lightning strikes in the vicinity
Features:
INPUT: 95...265 V AC
OUTPUT: 24 V DC
Electricity...
|
|
Moore/Murr switching power supply 85063 current 20A
Introduction: MURR/MURR switching power supply 85063, packaged and compact design, with high vibration and shock resistance, large overvoltage resistance to prevent voltage peaks such as lightning strikes in the vicinity
Features:
Input: 90...265 V AC
Output: 24...28 V DC
...
|
|
Moore/Murr ECO-RAIL-2 power supply 1-phase 85133 screw terminal connection
Introduction: The Eco-Rail-2 power supply unit offers machine and control cabinet manufacturers the possibility to supply electricity to consumers flexibly and economically. These units provide basic functionality and help monitor the total cost in the control cabinet. The Eco-Rail-2 series is available in five units with power ratings from 1.3 to 20 A. Not...
|
|
MURR/MURR EMPARRO67 power supply 9000-11112-1962020 24VDC
Summary: The Emparro67 power supply unit is designed for field applications. They are durable enough to withstand even the most extreme environmental conditions. The Emparro67 can be installed directly near the load where the 230 V AC to 24 V DC conversion occurs, so the power loss can be greatly reduced and the energy can be reduced.
|
|
Murr/Murr power supply 85724 current 10A
Introduction: The Moore/MURR power supply 85724 is packaged and compact, with high resistance to vibration and shock, and a large overvoltage resistance to prevent voltage peaks such as lightning strikes in the vicinity
Features:
INPUT: 85...265 V AC/90...250 V DC
OUTPUT: 4 ...
|
|
Moore/Murr switching power supply 85087 current 20 A
Introduction: MURR/MURR switching power supply 85087, packaged and compact design, with high resistance to vibration and shock, large overvoltage resistance to prevent voltage peaks such as nearby lightning strikes
Features:
Enter 185...265 V AC
Output: 24...28 V DC
...
|
|
Moore/Murr filter 26277
Introduction: Moore/Murr filter 26277
Features:
24 V AC/DC
VDR
For other configurations and voltages, please enquire.
Product parameters
Technical data
Input voltage 0... 30 V AC/DC
Material Flame retardant plastic ...
|
|
Murr/Murr power supply 87691 protection IP20
Introduction: Moore/Murr Power Supply 87691
Features:
INPUT: 3× 324...572 V AC / 450...745 V DC
OUTPUT: 24...28 V DC
Current: 10 A
Lacquered plates
Product parameters
Input voltage: 3× 324: ...
|
|
Moore/Murr switching power supply 85153 current 5A
Introduction: MURR/MURR switching power supply 85153, packaged and compact design, with high resistance to vibration and shock, large overvoltage resistance to prevent voltage peaks such as lightning strikes in the vicinity
Features:
Input: 100...240 V AC
Output: 24 V DC ±1%
...
|
|
Murr/Murr NLS power supply 85360 current 1A
Introduction: The Moore/Murr NLS power supply 85360, these units are not only extremely reliable, but also very efficient due to their integrated backup power supply. At the same time, they do not require much space in the cabinet.
Features:
Current: 1 A
Output rating: 24 ...
|
|
Contact
working hours
