SCHMERSAL solenoid switch BN 310-01Z transverse drive

Introduction: The SCHMERSAL solenoid switch BN85-R is used to monitor the position of sliding, hinged and movable safety doors. According to DIN VDE 0660-209, sensors without self-test functions must be equipped with a safety monitoring module in order to achieve control level 3 according to EN954-1 in order to be used for safety protection. The use of safety magnetic sensors is particularly advantageous in conditions that are extremely dirty or require high hygiene standards, which can be achieved by simple cleaning of these units. Another advantage is that it can be installed discreetly under non-magnetic materials. The arrangement of the work surface and the fixed area does not need to take into account the accumulation of dust or other cleaning functions. The switching distance is up to 60 mm, depending on the operating magnet and model, and has a long service life.

SCHMERSAL solenoid switch BN 310-01Z transverse drive

　　Features:

Working Guidelines: Magnetic

House design: rectangular

Building material: plastic, glass-fibre reinforced thermoplastic

Total weight: 75 grams

Execution: Reed contact

Product parameters

For Elevators: Yes

Number of NC contacts: 1

Operational Level: Horizontally

Actuator: Magnet

Mechanical life, typical: 1,000,000,000 switching cycles

Switching distance S n: 5 mm... 50 mm, BP 10 = 5 mm, 2 x BP 10 = 17 mm BP 15 = 6 mm, 2 x BP 15 = 17 mm, 2 x BP 15/2 = 17 mm, BP 20 = 20 mm, BP 31 = 20 mm, BP 12 = 10 ... 30 mm, BP 34 = 5 ... 20 mm, BP 11 = 8 ... 20 mm, BP 21 = 25 ... 50 mm, BE 20 = 20 mm

Note (switching distance Sn): The switching distance is up to 50 mm, depending on the operating magnet and model. The information on the switching distance is applicable when a separately installed device operates without the influence of ferromagnetism. Both positive and negative changes in distance are possible due to the ferromagnetic influence. When arranging multiple adjustment magnets, mutual influence must be taken into account.

Repeatability R: 0.3 mm

Maximum operating speed: 18 m/s

Connection, Plug: Wire

Cord length: 1 meter

Wire cross-section: 0.8 mm²

Wire cross-section: 18 AWG

Material of cable sheath: H03VV-F

Sensor height: 25 mm

Sensor length: 13 mm

Sensor width: 88 mm

Degree of protection: IP67 in accordance with IEC/EN 60529

Minimum ambient temperature: -25° Celsius

Maximum ambient temperature: +75°C

Vibration resistance according to EN 60068-2-6:10... 55 Hz, amplitude 1 mm

Impact resistance: 30 g / 11 ms

Maximum switching voltage: 250 VAC

Maximum switching voltage: 250 VDC

Maximum switching current: 3 pcs

Maximum switching capacity: 120 watts

Maximum switching capacity: 120 volt-ampere

Switching Element: Normally Closed (NC)

Bounce time, min: 0.3 ms

Bounce time, maximum: 0.6 ms

Maximum switching frequency: 300 Hz

This article introduces SCHMERSAL solenoid switch BN 310-01Z products, if you are interested in Schmersal solenoid switch, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business

SCHMERSAL solenoid switch BN 310-01Z transverse drive

Sections viewed

Contact

working hours