SCHMERSAL solenoid switch BN80-01Z DC AC voltage

Introduction: The SCHMERSAL solenoid switch BN80-01Z is used to monitor the position of sliding, hinged and movable safety doors. According to DIN VDE 0660-209, sensors without self-test functions must be equipped with a safety monitoring module in order to achieve control level 3 according to EN954-1 in order to be used for safety protection. The use of safety magnetic sensors is particularly advantageous in conditions that are extremely dirty or require high hygiene standards, which can be achieved by simple cleaning of these units. Another advantage is that it can be installed discreetly under non-magnetic materials. The arrangement of the work surface and the fixed area does not need to take into account the accumulation of dust or other cleaning functions. Switching distances of up to 60 mm, depending on the operating magnet and model, mechanical life, typical: 1,000,000,000 switching cycles.

SCHMERSAL solenoid switch BN80-01Z DC AC voltage

Features:

Working Guidelines: Magnetic

House design: cuboid

Building material: plastic, glass-fibre reinforced thermoplastic

Material of the active surface: plastic

Total weight: 25 grams

Execution: Reed contact

Product parameters

Number of NC contacts: 1

Operational Level: Horizontally

Active area: horizontally

Actuator: Magnet

Mechanical life, typical: 1,000,000,000 switching cycles

Switching distance S n: 0 mm... 20 mm, BP 8 = 0... 5 mm, BP 10 = 2... 9 mm, 2 x BP 10 = 2... 13 mm, BP 15 = 2... 10 mm, 2 x BP 15 = 2... 15 mm, 2 x BP 34 = 5... 18 mm, BP 20 = 0... 14 mm, BP 31 = 0... 14 mm, BP 11 = 2... 16 mm, BP 12 = 4... 20 mm

Note (Switching distance Sn): The switching distance is up to 20 mm, depending on the actuator magnet and model

Connection, Plug: Wire

Cord length: 1 meter

Wire cross-section: 0.3 mm2

Wire cross-section: 23 AWG

Material of cable sheath: PVC

Sensor height: 13 mm

Sensor length: 9 mm

Sensor width: 44 mm

Degree of protection: IP67

Minimum ambient temperature: -25° Celsius

Maximum ambient temperature: +75°C

Shock resistance: 15 grams, sinusoidal oscillation

Vibration resistance: 15 grams, sinusoidal oscillation

Voltage type: AC (alternating current voltage), DC (direct current voltage)

Maximum switching voltage: 250 VAC

Maximum switching voltage: 250 VDC

Maximum switching current: 0.5 amps

Maximum switching capacity: 8 watts

Maximum switching capacity: 10 volt-ampere

Switching Element: Normally Closed (NC)

Bounce time, maximum: 0.5 ms

This article introduces SCHMERSAL solenoid switch BN80-01Z products, if you are interested in Schmersal solenoid switch, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business

SCHMERSAL solenoid switch BN80-01Z DC AC voltage

Sections viewed

Contact

working hours