Introduction: Capacitive sensors with special properties from BALLUFF are particularly suitable for high technical requirements as well as for high temperatures and pressures. As capacitive-bonded sensors, they fit particularly easily and flexibly to the surface to be fixed. The stainless steel and Teflon housings make them particularly suitable for use in harsh environments. They operate over a wide range of voltages and are available in a particularly compact design.
Features:
It is used to detect the fill level of liquids and bulk products
A wide range of constructions, housing materials, and cost-effective specifications are available
Adjustment and setup are simple and can also be done via IO-Link
The patented Smart Level technology compensates for the effects of adsorbents, humidity and foam through glass and plastic walls up to 10 mm thick
Product parameters
Dimensions: 54.8 x 48.5 x 106 mm
Model series: S01
Thread (A): M18x1
Mounting: Not flush
Interface: Chuck connection
Switching output: NPN normally open contact (NO)
Switching frequency: 5 Hz
Sensitivity: Calibrate according to the medium
Housing Material: Stainless Steel (1.4305)
Sensing surface, material: PTFE
Ambient temperature: -30... 125 °C
Maximum compressive strength: 10 bar
Operating voltage: Ub10 - 35 VDC
Licensing/Conformance: CE, WEEE, EAC
Degree of protection: IP67
This article introduces the BALLUFF capacitive sensor BCS006K compressive strength 10bar product, if you are interested in BALLUFF capacitive sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
BALLUFF sensors BES0037
Dimensions: Ø 8 x 50 mm
Structure: M8x1
Installation: flush
Range: 1.5 mm
Switching output: PNP NO contact (NO)
Switching frequency: 5000 Hz
Housing material: Brass, nickel-free coating
Induction surface, material: PBT
Interface: Cable ...
|
|
BALLUFF sensors BESO2MC
Our standard BES inductive sensors for the detection of conductive metal objects are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
peculiarity
Cylindrical designs ranging from M5 to M30 ...
|
|
BALLUFF sensors BES01LM
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This global ...
|
|
BALLUFF sensors BES0083
Cylindrical sensors of Ø 6.5 mm, M8, M12, M18, M30 and cube construction of 40 × 40 mm
Flush and non-flush versions
The flush version has a range of up to 15 mm
Non-flush versions can reach distances of up to 30 mm
Plug or cable connection
Size: Ø ...
|
|
The Baluff inductive sensor BES02AC not flush mounted
Description: BALLUFF inductive sensors are ideal for object detection in metal areas, they are resistant to short circuits and non-contact operation, i.e. they are wear-free and extremely resistant to dirt. The sensors are available in a variety of sizes from hexahedral configurations with diameters from 3 mm to 80 × 80 mm. Powerful...
|
|
BALLUFF sensors BES024L
Balluff sensor BES024L dimensions: Ø 12 x 43 mm
Construction: M12x1
Installation: flush
Range: 3 mm
Switching Output: Polar Normally Closed Contact (NC)
Switching frequency: 1300 Hz
Housing material: Brass, nickel-free coating
Effective surface ...
|
|
BALLUFF sensors BES01ZW
Our standard BES inductive sensors for the detection of conductive metal objects are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
peculiarity
Cylindrical designs ranging from M5 to M30 ...
|
|
BALLUFF sensors BES0059
Balluff sensors BES0059 dimensions: Ø 12 x 65 mm
Construction: M12x1
Installation: flush
Range: 4 mm
Switch output: NPN NO contact (NO)
Switching frequency: 2500 Hz
Housing material: Brass, nickel-free coating
Effective surface, ...
|
|
Photoelectric sensors from Balluff BOD002M Accuracy±0.5%
Description: The BALLUFF photoelectric distance sensors are housed in a rugged plastic or metal housing, with analog current and voltage outputs, as well as a digital serial or IO-Link interface with IP65/67 and IP69K protection and are therefore suitable for use in harsh environments.
...
|
|
Baluff inductive standard sensor with preferred BES05YE
Our standard inductive sensors are ideal for object detection in metal areas. Short-circuit-resistant and non-contact operation, i.e. wear-free and very dirt-resistant. The sensors are available in a variety of sizes from hexahedral configurations with diameters from 3 mm to 80 × 80 mm.
Powerful and reliable ...
|
|
BALLUFF sensors BES025U
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This global ...
|
|
BALLUFF sensors BES0110
Our inductive standard sensors BES (with preferred version) for object detection in metal areas are robust and reliable. With a broad product range of more than 500 models, we can offer the right inductive sensor for any application.
This global ...
|
|
BALLUFF sensors BES0041
Balluff sensor BES0041 Dimensions: Ø 12 x 50 mm
Construction: M12x1
Installation: flush
Range: 3 mm
Switching output: Hermaphroditic NO contact (NO)
Switching frequency: 1300 Hz
Housing Material: Brass, Nickel-free ...
|
|
BALLUFF sensor BES01PH
Balluff sensors BES01PH dimensions: Ø 8 x 58 mm
Structure: M8x1
Installation: flush
Range: 2 mm
Switching output: PNP NO contact (NO)
Switching frequency: 1500 Hz
Housing Material: Stainless steel
Effective surface, material: PBT
...
|
|
Capacitive sensors from Balluff BCS000K Switching frequency 50 Hz
Introduction: Capacitive sensors with special properties from BALLUFF are particularly suitable for high technical requirements as well as for high temperatures and pressures. As capacitive-bonded sensors, they fit particularly easily and flexibly to the surface to be fixed. The stainless steel and Teflon housings make them especially ...
|
|
BALLUFF sensors BES01FJ
Dimensions: 50 x 25 x 10 mm
Structure: 50x25x10
Installation: flush
Range: 5 mm
Switching output: PNP NO contact (NO)
Switching frequency: 500 Hz
Housing material: Aluminum, die-cast
Induction surface, material: PBT
Interface: Cable, 3. ...
|
|
BALLUFF sensors BES01K6
Balluff sensor BES01K6 dimensions: Ø 12 x 70 mm
Construction: M12x1
Installation: flush
Range: 2 mm
Switching output: PNP normally closed contact (NC)
Switching frequency: 3500 Hz
Housing Material: Stainless steel
Effective surface, material: PBT
...
|
|
BALLUFF sensors BES05F9
Balluff sensor BES05F9 dimensions: Ø 12 x 65 mm
Construction: M12x1
Installation: flush
Range: 4 mm
Switching output: PNP NO contact (NO)
Switching frequency: 1000 Hz
Housing material: Brass, nickel-free coating
Effective surface ...
|
|
BALLUFF photoelectric sensor BOS00AW range of 0~50m
Introduction: Balluff through-beam sensors detect objects reliably regardless of surface, color and material – even luminous targets do not affect the detection. They consist of separate transmitter and receiver units that are aligned with each other. A target interrupts the beam ...
|
|
Balluff capacitive sensors BCS003A Ub10~35VDC
Introduction: Capacitive sensors from BALLUFF for object detection have a linear electric field. They can detect wafers, printed circuit boards, cardboard, stacks, bottles, blocks and sheets through the walls or pipes of containers made of glass and plastic (up to 4 mm thick).
|
|
Contact
working hours
