Summary: PMCtendo SZ servo motors can now support the pure digital motor feedback protocol HIPERFACE DSL. It only requires a single cable between the frequency converter and the motor feedback system. That's why the PMCtendo SZ servo motors support the use of single-cable technology in drive technology!
Features:
The overall length is extremely short and the power density is extremely high
Due to the low cogging torque, the operation is extremely quiet, resulting in a high-quality process
Maximum dynamics provide maximum cycle rate/machine output
Optimum heat dissipation ensures long-term high performance
High-resolution absolute encoder system for highest performance and absolute positioning
Ideal for on-board axles and tight spaces
High Energy Efficiency Factor Full Energy Saving (IE4)
Product parameters
Certificate: CE
Dimensions of the motor: 33
Standby torque: 2.25 Nm
Rated load torque: 1.96 Nm
Maximum torque: 7.00 Nm
Standby current: 3.55 A
Rated voltage: 3.17 A
Peak current: 16.90 A
Rated speed (RPM): 6000 rpm
Rated voltage: 400 V
Moment of inertia: 0.58 kgcm²
Braking: Yes
Feedback: 2 = Endat2.2 optical multiturn
Motor connection: Slewing connector
Connection Direction: To end A
Cooldown: 0 = convection
Type of motor shaft: No slide key
Shaft length: 30 mm
Flange size: 72 mm
Overall motor length: 221 mm
Centering diameter: 60 mm
Pitch diameter: 75 mm
Number of poles: 10
Protection type, enclosure: IP56
Total weight: 4600 g
Net weight: 3150 g
This article introduces the PILZ/Pilz Servo Motors PMCtendo SZ.33/1/2/2/7/K/H/60/00 products, if you are interested in Pilz/Pilz servo motors, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
The PILZ/Peel magneto-photoelectric sensor PSEN op4S-1-1 net weight 44 g
Summary: Thanks to the IP6K9K protection type, the PSENopt encoder enclosure is therefore suitable for use in humid environments with high hygienic requirements. The specular surface can easily reflect the light curtain beam, providing protection for a larger protective area without the need for additional light gratings. Due to the protective column, even when in ...
|
|
The small safety controller PNOZ m B1 from Pilz consumes 18.5 W
Description: The Pilz small safety controller PNOZ m B1 is configurable with the small safety controller PNOZmulti Mini, the base unit, expandable, Ethernet interface for connecting switches, USB 20 memory.
Specifications ...
|
|
Pilz/Pilz touchscreen PMI 612 Control resolution 1280x800
Description: PILZ/Pilz touchscreen PMI 612 Control resolution 1280x800, PMI control panel with 12.1-inch touchscreen, installation/licensing of CODESYS runtime and TargetVisu, main systems: CANopen, ModbusTCP.
...
|
|
PILZ/Pilz mechanical safety switch PSEN me4/4AS pull-out force 10N
Summary: PSENmech mechanical safety switches are suitable for the safe monitoring of movable guards. If the guard is turned on, the PSENmech safety switch is triggered. Then, with the help of Pilz evaluation equipment, the dangerous machine movement is brought to a standstill. PSENmech Safe ...
|
|
Pilz mechanical safety switch PSEN me3.1/2AS N/C quantity 2
Summary: PSENmech mechanical safety switches are suitable for the safe monitoring of movable guards. If the guard is turned on, the PSENmech safety switch is triggered. Then, with the help of Pilz evaluation equipment, the dangerous machine movement is brought to a standstill. PSENmech Safe ...
|
|
PILZ/Pilz touchscreen PMI 612 primo net weight 2730 g
Introduction: The PMI 6 primo control system has PLC, motion control and CNC functions. As a result, they can be easily automated within the machine, including motion management. Up to 32 axes can be flexibly connected to form an electronic spindle. In addition to CNC tasks, it is possible to use a control system that is lightweight.
|
|
PILZ/Peel magneto-photoelectric sensor PSEN op2S-1-1 meter diameter M18
Summary: Thanks to the IP6K9K protection type, the PSENopt encoder enclosure is therefore suitable for use in humid environments with high hygienic requirements. The specular surface can easily reflect the light curtain beam, providing protection for a larger protective area without the need for additional light gratings. Due to the protective column, even when in ...
|
|
PILZ/Pilz servo amplifier PMCprotego D torque control
Introduction: The PMCprotego D servo amplifier is designed for stand-alone operation. Even the basic version offers all the functions you need to operate a brushless motor using asynchronous or synchronous technology. More than 20 different feedback systems can be directly connected for the widest range of power ...
|
|
PILZ/Peel magneto-photoelectric sensor PSEN op4S-1-2 metre diameter M18
Description: PILZ/Peel magneto-photoelectric sensor PSEN op4S-1-2 safety beam device category 4, PL e, body protection, infrared sensor (increased working distance), connection receiver is 4-pin M12-pin connector, connection transmitter is 4-pin M12-pin connector.
...
|
|
The Pilz mechanical safety switch PSEN me3/2AS width 52 mm
Summary: PSENmech mechanical safety switches are suitable for the safe monitoring of movable guards. If the guard is turned on, the PSENmech safety switch is triggered. Then, with the help of Pilz evaluation equipment, the dangerous machine movement is brought to a standstill. PSENmech Safe ...
|
|
PILZ/Peel magnetic safety switch PSEN 1.1p-20/PSEN voltage 24V
Description: Non-contact magnetic safety switches are used to monitor the position of guards according to EN 60947-5-3 and can also be used for general position monitoring. PSENmag offers a certified cost-optimised system consisting of sensors and control systems from Pilz. The compact design of PSENmag ...
|
|
PILZ/Pilz mechanical safety switch PSEN me3 / 2AR with a total weight of 238 g
Summary: PSENmech mechanical safety switches are suitable for the safe monitoring of movable guards. If the guard is turned on, the PSENmech safety switch is triggered. Then, with the help of Pilz evaluation equipment, the dangerous machine movement is brought to a standstill. PSENmech Safe ...
|
|
The small safety controller PNOZ m B0 from Pilz has a net weight of 235 g
Introduction: PILZ small safety controller PNOZ m B0 PNOZ multi 2, base unit, expandable, 20 safe digital inputs, 4 safe semiconductor outputs.
Product parameters
Certificates: CE, cULus ...
|
|
PILZ/Pilz mechanical safety switch PSEN me2 / 2AR net weight 146 g
Summary: PSENmech mechanical safety switches are suitable for the safe monitoring of movable guards. If the guard is turned on, the PSENmech safety switch is triggered. Then, with the help of Pilz evaluation equipment, the dangerous machine movement is brought to a standstill. PSENmech Safe ...
|
|
PILZ/PILZ TOUCHSCREEN PMI 638 CONTROL 15-INCH RESISTIVE
INTRODUCTION: THE PILZ/PILZ TOUCHSCREEN PMI 638 CONTROL OPERATOR TERMINAL PMI 6 CONTROL FEATURES PLC SOFTWARE AS WELL AS PROVEN DIAGNOSTICS AND VISUALIZATION CONCEPTS. The powerful 1.3 GHz processor ensures fast response times, even in complex applications.
...
|
|
The Pilz/Pilz PNOZmulti 2 is configurable with a control system
Introduction: The configurable control system PNOZmulti 2 can be used to perform several safety functions on a plant or machine. With a width of only 45 mm, the base unit is scalable. As a result, the system can be expanded according to the requirements and dimensions of the user's machine.
...
|
|
Pilz/Pierre Magneto PMCtendo SZ.75/2/1/2/7/F/H/45/00
Summary: PMCtendo SZ servo motors can now support the pure digital motor feedback protocol HIPERFACE DSL. It only requires a single cable between the frequency converter and the motor feedback system. That's why the PMCtendo SZ servo motors support the use of single-cable technology in drive technology!
...
|
|
AUTOMATION SYSTEM PILZ/PILZ PSS 4000
Description: The controller of the automation system PSS 4000 carries on Pilz's extensive application know-how. With a wide range of different functions, the most diverse applications can be implemented. In addition, PLC controllers with the -R mark have special certifications. Moreover, they are compliant with the railway sector, elevators/electric ...
|
|
PILZ/Pilz safety switch PSEN 2.1p-20/PSEN current 0.01A
Description: Non-contact magnetic safety switches are used to monitor the position of guards according to EN 60947-5-3 and can also be used for general position monitoring. PSENmag offers a certified cost-optimised system consisting of sensors and control systems from Pilz. The compact design of PSENmag ...
|
|
The mechanical safety switch PSEN me3.1/2AR from Pilz has a height of 90 mm
Summary: PSENmech mechanical safety switches are suitable for the safe monitoring of movable guards. If the guard is turned on, the PSENmech safety switch is triggered. Then, with the help of Pilz evaluation equipment, the dangerous machine movement is brought to a standstill. PSENmech Safe ...
|
|
Contact
working hours
