AIRTAC 2J Series Angle Seat Valve Pipe Diameter G1/2

Introduction: AIRTAC 2J series angle seat valve adopts air control, which can be used in non-electric, flammable and explosive occasions, with low starting air pressure and low pressure to control high pressure; The 45° angle seat structure of the valve body and the streamlined design of the inner cavity reduce the resistance of the flow channel and make the fluid flow more gentle, so as to achieve a large flow rate; The connecting rod increases the filter element to avoid the entry of impurities and prolong the service life; The actuator part can be rotated 360° for easy installation.
AIRTAC/AirTAC 2J Series

Product Advantages:

1. It adopts air control, which can be used in non-electric, flammable and explosive occasions, with low starting air pressure and low pressure to control high pressure;

2. The body, connecting rod and other parts are made of stainless steel, which has superior anti-rust ability; It is sealed with Teflon material, which has a wide range of applications and can be used for high temperature, strong corrosiveness and other liquids;

3. The 45° angle seat structure of the valve body, the streamlined design of the inner cavity, reduces the resistance of the flow channel, and the fluid flow is smoother, so as to achieve large flow; The connecting rod increases the filter element to avoid the entry of impurities and prolong the service life;

4. The actuator is equipped with a visual position indication window, which can observe the opening size of the angle valve and adjust the size of the flow rate, and the indicator window can also be replaced with a limit switch or an emergency manual device.

5. The actuator control port adopts embedded metal joints, and the transition connection plate is used to facilitate the installation of NAMUR solenoid valves;

6. The actuator part can be rotated 360°, which is easy to install.

Product parameters

Initial state: Normally closed

Operating pressure (bar): 16

Actuator size (mm): 40

Pipe diameter: G1/2

Standard flow rate (L/min) - DN (mm): 15

Operating pressure range (MPa): 0.2-1.0

Kv value (m³/h): 4.4

Installation & Use

1. Before use, please check whether the working status of the product and the data in the catalog are - to, and should not be used beyond the specified range.

2. Before the system is released and cooled, it is not allowed to maintain, test and disassemble this product.

3. When disassembling and assembling the valve body, due to the large spring force preload inside the controller, it is necessary to ventilate the piston with 1 hole first

After the sub-movement is in place, then rotate the screw at the valve body and the connecting rod; Do not rotate directly, otherwise it may cause the screw teeth to bite to death and cannot be removed

outfit the consequences.

4. If the controller part needs to be maintained, it needs to be disassembled and assembled with tools, and the spring with load should be considered to cause damage when dismantling

Injuries.

This article introduces the AIRTAC/AirTAC 2J series angle seat valve using pressure range 0.2-1.0MPa products, if you are interested in AIRTAC/AirTAC 2J series angle seat valve, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new customers to inquire, visit and negotiate business!

AIRTAC 2J Series Angle Seat Valve Pipe Diameter G1/2

Sections viewed

Contact

working hours