Introduction: This 26-inch wide 5-drawer tool cabinet and cabinet is made of all-steel for strength and durability. It has a 30-pound load capacity, full-extension ball bearing drawer slides, and a keyed locking system with two external locking levers to protect the tool. It has a load rating of 300 pounds with four 3" x 1" casters, two of which lock and rotate. Hinged lid support keeps lid open, and non-slip braided top pads help protect cabinet surfaces. In addition to our 100 Series metal tool storage line, it can also meet your home garage tool storage and organization needs. Top and middle tool cabinets, rolling tool cabinets, and mobile tables are available in a variety of sizes, all made of 20-24 gauge steel and complete with black steel drawer trim.
Features & Benefits:
Full-extension ball bearing drawer slides for smooth operation
Five 30-pound weight capacity drawers
300 lb load rating with 3" x 1" casters, one lock
A keyed locking system with an external locking lever protects the tool
Hinged lid support opens the lid
Spacious bulk storage area with sliding panel doors
Full-width black steel drawer trim
Non-slip open braided top pads help protect cabinet surfaces
The all-steel construction provides strength and durability
Storage 10227 cubic inches
Product Details
Color/Finish Home Black
Depth: 14 inches
Drawer slide type Ball bearing
Drawer weight 30 lbs
Full-reach drawers really
Height 43.5 inches
Lock Type: Built-in lock
Model 100 series
Number of casters 4
Number of drawers 5
Main material: Steel
Weight 71 lbs
Width: 26.5 inches
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces Stanley/STANLEY products, if you are interested in Stanley/STANLEY, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
STANLEY/STANLEY INSULATED DIAGONAL NOSE PLIERS 84-004-23
About: STANLEY/STANLEY Insulated Diagonal Nose Pliers 84-004-23
Features:
The pliers body is forged from chrome-vanadium steel, which is strong and durable
The cutting edge hardness is HRC55 or more
VDE insulation withstand voltage 1000V certification in accordance with DIN EN 60900 VDE 0682-201 and IEC60900 ...
|
|
STANLEY/STANLEY CHARGEIT 1 AMP AUTOMATIC BATTERY CHARGER/SUSTAINER
Product Introduction: Keep the 12V battery easy to charge and ready to use. THE STANLEY 1 AMP BATTERY CHARGER IS FULLY AUTOMATIC, WITH AN INTEGRATED REVERSE POLARITY ALARM AND CIRCUIT PROTECTION TO PREVENT OVERCHARGING OR SHORT CIRCUITING.
Fields of application
Can be used for a variety of ...
|
|
STANLEY/STANLEY MAGNETIC SHAPEFORM TORPEDO LEVEL STHT42264-8-23
INTRODUCTION: STANLEY/STANLEY MAGNETIC BODY SHAPE TORPEDO LEVEL STHT42264-8-23
Features:
The measuring surface is magnetic
Horizontal, vertical and 45° visibility3 blisters
Horizontal blisters can be read from the top or side
The accuracy is 1mm/m
...
|
|
STANLEY 62 Low Angle Jack 12137 9.2mm
Introduction: The classic STANLEY No. 62 Sweetheart™ Low Angle Jack aircraft is made of 3/16" extra-thick A2 steel with excellent edge retention and comes with cherry wood handles and knobs for great comfort. Norris type regulator and adjustable needle plate for different types of wood ...
|
|
STANLEY 6.75 INCH LONG NOSE LOCKING PLIERS WEIGHS 4 POUNDS
Product Introduction: STANLEY6-inch long nose locking pliers provide quick setup and powerful locking capability. The 6-inch long nose lock pliers are made of forged steel with induction-hardened jaws for a secure grip in a rugged tool. The proboscular claw can reach into tight spaces and is tightened, clamped ...
|
|
STANLEY/STANLEY Japanese Style Professional Plastic Pliers 90-567-23
About: STANLEY Japanese Professional Plastic Nozzle Pliers 90-567-23
Features:
Japanese design, professional quality.
The clamp body is forged chrome-vanadium steel, which has high strength and durability.
Industrial-grade alloy cutting edge with hardness over HRC55 and sharp shear.
...
|
|
STANLEY/STANLEY WIRE STRIPPERS
INTRODUCTION: STANLEY/STANLEY WIRE STRIPPERS
Features:
Adjustable shank screws to control the stripping wire diameter,
The stripping range is 0.5-4mm.
It can also be used for thread cutting, bending and flattening cores.
Lifetime warranty (cutting edge is not covered by warranty)
...
|
|
STANLEY/STANLEY Impact Driver STDC1802-A9 ** High torque 164Nm
Introduction: STANLEY impact driver STDC1802-A9, quick change chuck, easy to use, body magnet for easy storage of bits, intelligent and efficient fast charger, to achieve higher work efficiency
Features:
Quick chuck change
Easy to use
Fuselage...
|
|
STANLEY/STANLEY PIPE WRENCH 87-629-23
INTRODUCTION: STANLEY/STANLEY PIPE WRENCH 87-629-23
Features:
The cr-mo steel forged jaws are heat-treated for high hardness.
Cast iron handle, sturdy and durable.
Interocclusive teeth provide a strong clamping effect.
We put our customers first...
|
|
STANLEY/STANLEY MINIATURE THREE-GROOVE BENDER 84-863-22
Introduction: Stanley/STANLEY Small Triple Slot Elder 84-863-22
Features:
Made of high-carbon steel SK5, the cutting edge hardness reaches HRC58-63, and the cutting is sharp.
Serrated cutting edge for quick and flat shearing.
It can cut single or multi-strand iron wire, spring steel wire, etc.
|
|
Stanley/STANLEY Metric Easy Hook Tape Measure STHT30123-8-23 5m
ABOUT: STANLEY/STANLEY METRIC EASY-HOOK TAPE MEASURE STHT30123-8-23
Features:
The large hook is easy to hook the workpiece
The ruler belt made of high-quality steel belt has good straightness
White single-sided ruler band, the scale is clear and easy to read
The surface of the ulnar belt is coated with nylon.
|
|
STANLEY/STANLEY16 OZ FATMAX ANTI-VIBE CLAW PULLER
Product Introduction: The striking surface of the FatMaxSteel Anti-Vibe hammer is 75% larger than that of a conventional hammer for improved accuracy. Shock-resistant technology** minimizes vibration and shock in the event of an impact. Torsion control reduces fatigue. Another feature of this hammer is the forged one-piece steel design, which has both ...
|
|
Stanley/STANLEY24" FATMAX Box Girder Level Magnetometer
Product Introduction: The STANLEY24 inch FATMAX electromagnetic level has a sample vial that provides a maximum accuracy of 0.0005 in/inch. Large, ergonomic rubber-overmolded handle for comfortable use on the job.
Product Specifications:
Face...
|
|
The Stanley/STANLEY Laser Rangefinder TLM99 automatically calculates 100 feet
Product Introduction: STANLEY100'/30m laser rangefinder allows one person to take measurements without help. The tool measures distances up to 100 feet (30 meters) and provides accurate readings in a range of +/- 3/32 inches (2 mm).
Give birth...
|
|
STANLEY Torx Percussion Wrench 96-924-23
Introduction: STANLEY/STANLEY Torx Percussion Wrench 96-924-23
Features:
Chrome vanadium forged, heavy and durable
The most popular style in Europe
The surface is color-treated, not for blackening, but for a delicate appearance
Passed DIN standard
We...
|
|
STANLEY/STANLEY STRAIGHT FORCEPS 84-370-23
INTRODUCTION: STANLEY/STANLEY STRAIGHT PLIERS 84-370-23
Features:
The jaws are forged with chrome-vanadium steel as a whole, and the toughness is good.
Stamped steel plate handle, clamping object without deformation.
Heat-treated adjustment rod, easy to adjust, and no deformation.
Serrated pliers ...
|
|
Stanley/STANLEY German Straight Mouth Circlip Pliers 84-365-23
Introduction: STANLEY/STANLEY Straight Nose Circlip Pliers for German Hole 84-365-23
Features:
Forged from monolithic Cr-V steel, it is strong and durable.
The pliers are finely polished and blackened, which is beautiful and generous.
Our customer-centric service concept: all-round ...
|
|
STANLEY/STANLEY German Professional Long Nose Pliers 89-578-23
Introduction: STANLEY/STANLEY German Professional Long Nose Pliers 89-578-23
Features:
German design, professional quality
The clamp body is forged chrome-vanadium steel, which has high strength and durability.
Industrial-grade alloy cutting edge with hardness over HRC55 and sharp shear.
Symbol...
|
|
STANLEY TOOLS/STANLEY PIPE WRENCH 87-627-23
INTRODUCTION: STANLEY TOOLS/STANLEY PIPE WRENCH 87-627-23
Features:
The cr-mo steel forged jaws are heat-treated for high hardness.
Cast iron handle, sturdy and durable.
Interocclusive teeth provide a strong clamping effect
We take our customers as the ...
|
|
STANLEY/STANLEY DYNAGRIP CARP PLIERS
INTRODUCTION: STANLEY/STANLEY DYNAGRIP CARP PLIERS
Features:
Monolithic high-carbon steel forging
Rubber and plastic bi-material handle, comfortable to hold
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, ...
|
|
Contact
working hours
