Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The mini type is suitable for occasions where the installation space is limited, and the detection distance of most mini ordinary LED light sources is less than 1 meter, the detection distance of the mirror reflection type is less than 10 meters, and the through-beam type is about 20 meters, and the detection distance of the laser light source will be higher than this range. The detection range of the small and compact version will be further extended and the maximum through-beam distance of up to 350 meters is now available.
Product parameters
Sensor Principle / Detection Principle Thru-beam photoelectric sensor
Dimensions (W x H x D) 20 mm x 55.7 mm x 42 mm
Housing shape (beam outlet) Square
Maximum switching distance 0 m ... 45 m
Type of light source Infrared
Light source LED 1)
Spot size (distance) Ø 110 mm (8 m)
Shaft length 850 nm
Supply voltage 10 V DC ... 30 V DC 1）
Residual ripple ≤ 5 Vss
Current Consumption 2)
Consumes current, transmitter
≤ 30 mA 3）
< 50 mA 2）
Current consumption, receiver
≤ 30 mA 3）
< 50 mA 2）
Switching output
Reverse pulse: PNP/NPN
PNP
NPN
Output QL1 / C output signal switching device or IO-Link mode
Switch Type: Bright/Dark Switching
Signal voltage PNP high/low approx. UV - 2.5 V / 0 V
The signal voltage NPN high/low is approximately less than 2.5 V
Output current Imax. ≤ 100 mA
Response time ≤ 500 μs 4)
Switching frequency 1,000 Hz 5)
Connection type Plug, M12, 4-pin
Protection circuits
A 6）
B 7）
C 8）
D 9）
Protection class III
Weight 100 g
IO-Link ✔
Housing material plastic, VISTAL®
Materials, Optics Plastics, PMMA
Enclosure rating
IP66 (according to EN 60529)
IP67 (according to EN 60529)
IP69 (according to EN 60529) 10)
Test input transmitter off Test according to 0 V
Operating ambient temperature –40 °C ... +60 °C
Storage ambient temperature –40 °C ... +75 °C
This article introduces SICK/Sick photoelectric sensor products, if you are interested in RKC, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
SICK/Sick miniature photoelectric sensor WL9M4-3P1132 hole type M4
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Sick Fiber Optic Sensor GLL170T-B434 Maximum tightening torque: 0.5 Nm
Parametric technology
Brand: Sick
Model: GLL170T-B434
Type: Fiber Optic Sensor
Machine model: Fiber optic sensor
Device Type Details: Stand-alone
Dimensions (W x H x D): 10 mm x 31.7 mm x 72.5 mm
Housing shape ( ...
|
|
SICK/Sick cylindrical photoelectric sensor GRSE18-P2421V through-beam type
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK miniature photoelectric sensor WL9-3F2234S20 retroflex
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK Photoelectric Sensor GTB10-P4211 Setting: Potentiometer, 5 turns
Product Introduction
Product name: SICK Sick
Product type: small photoelectric sensor
Model: GTB10-P4211
Features:
Working principle Diffuse photoelectric sensor
How it works in more detail Background suppression
Dimensions ( ...
|
|
The SICK/Sick cylindrical photoelectric sensor GRSE18S-P133Y consumes 30 mA
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
The standby time of the OPR20G-RB111517 gloss sensor from SICK < 2.5 s
Introduction: The SICK/SICK OPR20G-RB111517 gloss sensor has a standby time of < 2.5 s, an enclosure degree of protection of IP67, jitter: 500 μs, and provides extremely easy data access to the PLC via IO Link.
peculiarity
According to the glossiness of the surface ...
|
|
SICK/Sick miniature photoelectric sensor WTB4S-3P3265H M12 thread
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/SICK Miniature Photoelectric Sensor GTB2F-E1131 Background Suppression
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK Miniature Photoelectric Sensor WL12G-3B2531 Retro-reflective
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick miniature photoelectric sensor WTB4S-3P5204HS02 square
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/SICK Cylindrical Photoelectric Sensor VL18L-3F324 Double-lens Mirror reflection
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
Sick fiber optic sensor GLL170-P332 response time: ≤ 250 μs 4)
Product Introduction
Brand: Sick
Machine model: Fiber optic sensor
Device Type Details: Stand-alone
Dimensions (W x H x D): 10 mm x 31.7 mm x 72.5 mm
Housing shape (beam outlet): square
Maximum switching distance
...
|
|
SICK/SICK multi-task photoelectric sensor IRT-P212C73 infrared LEDs
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
Sick Fiber Optic Sensor GLL170-P332 Protection Class: III / Wire Material: PVC
Product Introduction
Machine model: Fiber optic sensor
Model: GLL170-P332
Device Type Details: Stand-alone
Dimensions (W x H x D): 10 mm x 31.7 mm x 72.5 mm
Housing shape (beam outlet): square
Maximum switching distance:
...
|
|
SICK plug and cable YF2A14-020VB3XLEAX 4-core, PVC
Product Introduction
Product name: SICK
Product Type: Plugs & Cables
Model YF2A14-020VB3XLEAX
Technical parameters
Accessory set Plugs and cables
Accessories Series Connecting cables
Connection A head ...
|
|
The WL9-3P1232 miniature photoelectric sensor from SICK is self-aligning
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK PAC50-AGA 2 x PNP/NPN/push-pull pressure sensor
Features:
Two-color display (green/red) provides a clear indication of the output signal status (whether it is within the set range or not)
The extended display function allows the user to quickly view important system parameters
Intuitive operation makes commissioning quick and easy
Rear ...
|
|
SICK/SICK miniature photoelectric sensor WTV4-3P1341 diffuse reflectance
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Compact photoelectric sensor GTB2F-F511 Background suppression, diffuse reflection
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
Contact
working hours
