Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The mini type is suitable for occasions where the installation space is limited, and the detection distance of most mini ordinary LED light sources is less than 1 meter, the detection distance of the mirror reflection type is less than 10 meters, and the through-beam type is about 20 meters, and the detection distance of the laser light source will be higher than this range. The detection range of the small and compact version will be further extended and the maximum through-beam distance of up to 350 meters is now available.
Product parameters
Sensor Principle/ Detection Principle Diffuse photoelectric sensor, energy type
Dimensions (W x H x D) 18 mm x 18 mm x 55.9 mm
Housing shape (beam outlet) cylindrical
Housing length 55.9 mm
Available thread length 31.7 mm
Screw diameter (housing) M18 x 1
Optical axis axial
Maximum switching distance 5 mm ... 550 mm 1)
Sensing distance 10 mm ... 400 mm 1)
Type of light source: Visible red light
Light source PinPoint-LED 2)
Spot size (distance) Ø 9 mm (400 mm)
Shaft length 650 nm
Set the potentiometer, 270°
Special Applications Hygienic and humid environments
Supply voltage 10 V DC ... 30 V DC 1)
Residual Ripple ± 5 Vss 2)
Current consumption 30 mA
Switching output PNP
Switching function Compensation amount
Switch Type: Light/Dark Toggle 3)
Signal voltage PNP high/low approx. UV - (≤ 3 V)/ approx. 0 V
Output current Imax. 100 mA 4)
Response time < 1,000 μs 5)
Switching frequency 500 Hz 6)
Connection Type Cable 4-pin, 2 m 7)
Wire Material: PVC
Conductor cross-section 0.14 mm²
Conductor diameter 4.8 mm
Protection circuits
A 8)
B 9)
D 10)
Protection class III
Weight 100 g
Housing material: Stainless steel, V4A (1.4404,316L) stainless steel
Materials, Optics Plastics, PMMA
Maximum tightening torque 90 Nm
Enclosure rating
IP67
IP68 11)
IP69K 12)
Scope of delivery Fixing nuts (2 x)
Electromagnetic compatibility EN 60947-5-2
Operating ambient temperature –25 °C ... +55 °C 13)
Storage ambient temperature –30 °C ... +75 °C
This article introduces SICK/Sick photoelectric sensor products, if you are interested in RKC, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
SICK/Sick miniature photoelectric sensor WTB4S-3P2234VS05 diffuse reflection
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK sensor WL11-2P2430 plug, M12, 4-pin
Product Introduction
Product name: SICK
Product Type: Compact photoelectric sensor
Product series W11-2
Model WL11-2P2430
Features:
Working principle Retroreflective photoelectric sensor
Working Principle ...
|
|
SICK/SICK cylindrical photoelectric sensor GRTB18S-P2412VS01 Diffuse reflection
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
The SICK/SICK miniature photoelectric sensor WLG4S-3P2234 is self-aligning
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK fork sensor WFL50-60B416 PNP/NPN
Product Introduction
Product name: SICK
Product Type Fork sensor
Product family WFL
Model WFL50-60B416
Features:
How it works: Optical principle
Dimensions (W x H x D) 10 ...
|
|
SICK cylindrical photoelectric sensor GRTE18S-P246Z with 4-pin plug
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK 2D LiDAR sensor TIM310-1030000 ≤ 100 mA
Product Introduction
Brand: SICK
Type: 2D LiDAR sensor
Series: TiM
Model: TIM310-1030000
Measuring principle HDDM+
Applications: Indoor
Light source: Infrared (850 nm)
Laser class 1 (IEC 6 ...
|
|
SICK/SICK multi-task photoelectric sensor IRT-P232C83 potentiometer, 9 steps
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick miniature photoelectric sensor WL2S-2N3030S05 1000Hz5
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK signal cable YF8U14-020VA3XLEAX M8, 4-pin, straight
Product Introduction
Product name: SICK Sick
Type: Signal line
Model: YF8U14-020VA3XLEAX
Accessory set: plug and cable
Accessories series: connecting cables
Connection Type A head: socket, M8, 4-pin, straight, A-coded
Join...
|
|
The IDM series is a mobile handheld barcode scanner without cable
Features:
Applications: Industrial applications
Scan Design: Cable Type
Sensor resolution: 1,280 px x 800 px
Light source: LED, visible, red, 660 nm
Alignment aids: laser, red, 630 nm
Read distance ...
|
|
SICK 3D LiDAR sensor MRS1000P Weight: 1.2 kg
Introduction: SICK/SICK 3D LiDAR sensor MRS1000P Weight: 1.2 kg, scanning frequency: 50 Hz, 4 x 12.5 Hz, opening angle: horizontal (275°), vertical (7.5°), on 4 scanning levels.
parameter
Applications: Outdoor
...
|
|
SICK photoelectric sensor WL280-2P2431 plug, M12, 4-pin
Product Introduction
Product name: SICK
Product Type: Photoelectric sensors
Product series W280-2
Model WL280-2P2431
Working principle Retroreflective photoelectric sensor
Details of the working principle of the double lens
Ruler...
|
|
SICK PBS-RB400SGHSS0D5A0ZS pressure sensor
Product Introduction
Media: liquids and gases
Pressure Type: Gage
Measuring range 0 bar ... 400 bar
Process temperature: –20 °C ... +85 °C
Zero point compensation: max. +3% of range
Output signal 2 x PNP + 4 m ...
|
|
SICK/SICK miniature photoelectric sensor WTB4S-3N1362V diffuse reflector
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK WLG4S-3F2234 photoelectric sensor
Product introduction: SICK photoelectric sensor WLG4S-3F2234, W4 series of high-performance miniature photoelectric sensors for automation.
Specifications:
Working principle Retroreflective photoelectric sensor
How it works in detail Automatic alignment
Maximum switching distance 0.01 m ... 5 ...
|
|
SICK/Sick cylindrical photoelectric sensor GRSE18-P2421V through-beam type
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK miniature photoelectric sensor WSE9-3P2230S05
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK WTB2S-2E3010S10 Miniature Photoelectric Sensor Current consumption: 20 mA 3
Product Introduction
Working principle: Diffuse photoelectric sensor
Working details: Background suppression
Dimensions (W x H x D): 7.7 mm x 21.8 mm x 13.5 mm
Housing shape (beam outlet): square
Maximum switching distance: ...
|
|
SICK i14-M0213 Lock Operation: ≥ 12 N
Product Introduction
Product name: SICK
Product Type: Safety locking device
The product family i14 Lock
Model i14-M0213 Lock
Sensor principle: electromechanical
Locking Principle: Quiescent current principle
Lockdown monitoring ...
|
|