Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The mini type is suitable for occasions where the installation space is limited, and the detection distance of most mini ordinary LED light sources is less than 1 meter, the detection distance of the mirror reflection type is less than 10 meters, and the through-beam type is about 20 meters, and the detection distance of the laser light source will be higher than this range. The detection range of the small and compact version will be further extended and the maximum through-beam distance of up to 350 meters is now available.
Product parameters
Sensor Principle / Detection Principle Thru-beam photoelectric sensor
Dimensions (W x H x D) 18 mm x 18 mm x 83 mm
Housing shape (beam outlet) cylindrical
Housing length 83 mm
Screw diameter (housing) M18 x 1
Optical axis axial
Maximum switching distance 0 m ... 20 m
Sensing distance 0 m ... 18 m
Type of light source Infrared
Light source LED 1)
Spot size (distance) Ø 600 mm (15 m)
The emitter scattering angle is 2.5°
Shaft length 880 nm
Settings None
Special Applications Hygienic and humid environments
Supply voltage 10 V DC ... 30 V DC 1）
Residual ripple ≤ 10 % 2)
Current consumption, transmitter 35 mA 3)
Current consumption, Receiver 40 mA 3)
Switching output NPN 4)
Switch Type: Light/Dark Switching 4)
The switch type is optional via light/dark on
Signal voltage NPN high/low approx. UV/< 2.0 V
Output current Imax. ≤ 100 mA
Response time ≤ 2 ms 5)
Switching frequency 250 Hz 6)
Reception angle 8°
Optical path attenuation ≥ 20 %
Connection Type Plug, M12, 4-pin 7)
Protection circuits
A 8）
B 9）
C 10）
D 11）
Protection class III
Weight 240 g
Housing material: Stainless steel, V4A (1.4404,316L) stainless steel
Materials, Optics Plastic, Plan, PPS (Grilamid)
IP67, IP68, IP69K 12)
Test the transmitter at the input end with TE turned off according to 0 V
Operating ambient temperature –25 °C ... +80 °C 13)
Storage ambient temperature –40 °C ... +80 °C
This article introduces SICK/Sick photoelectric sensor products, if you are interested in RKC, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
SICK/Sick cylindrical photoelectric sensor VL18L-3P324 Double-lens Mirror reflective type
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick miniature photoelectric sensor WSE4S-3F3430V through-beam type
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
The SICK/SICK hybrid photoelectric sensor ZLD18-2EZ1G2 has a cross-section of 0.13 mm²
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
The WL9-3P1232 miniature photoelectric sensor from SICK is self-aligning
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK cylindrical photoelectric sensor GRL18S-E2336 double lens
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick miniature photoelectric sensor WL4-3P3430 M12 4-pin
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
The SICK/SICK miniature photoelectric sensor GL2S-N0311S04 axis length is 640 nm
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK T-type slot cylinder sensor MZT8-03VPS-KR0 DC 3 wires
Product Introduction
Product name: SICK
Product Type: T-Groove Sensor
Product series MZT8
Model MZT8-03VPS-KR0
Cylindrical T-slot
Cylinder type with adapter
Rod cylinder specialist
Tie rod cylinder
...
|
|
SICK/SICK miniature photoelectric sensor WTB4S-3N1362V diffuse reflector
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick cylindrical photoelectric sensor GRTB18S-P2421V M18 x 1
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK WTB2S-2E3010S09 Miniature Photoelectric Sensor 1,200 Hz 5)
Product Introduction
Working principle: Diffuse photoelectric sensor
Working details: Background suppression
Dimensions (W x H x D): 7.7 mm x 21.8 mm x 13.5 mm
Housing shape (beam outlet): square
Maximum switching distance: ...
|
|
SICK/Sick miniature photoelectric sensor WTB4S-3P2262 weighs 30g
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK RFID RFU63x RFU630-04105 Protection class: III
Product Introduction
Version: Long Range
Product Catalog: RFID readers without built-in antennas
Radio Approval: China (800 900 RFID Equipment Inspection Standard)
Frequency band: UHF (860 MHz ... 960 MHz)
Carrier frequency: 9 ...
|
|
SICK/Sick cylindrical photoelectric sensor GRSE18S-N1147
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK inductive proximity sensor IME12-08NPSZW2S Ø 12 mm
Product parameters
Brand: SICK
Type: Inductive proximity sensor
Model: IME12-08NPSZW2S
Design Construction: Metric design
Housing shape Standard construction form
Thread size M12 x 1
Ø 12 mm
...
|
|
The GRTE18-P1167 cylindrical photoelectric sensor from SICK has a shaft length of 650 nm
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK Miniature Photoelectric Sensor WTB4S-3P2262V Diffuse Reflectance
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick cylindrical photoelectric sensor GRTE18S-P2342 Diffuse reflection
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick miniature photoelectric sensor WTB4-3F1361 3-core 2 m
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK cylindrical photoelectric sensor GRTB18-P1112V, weight 175g
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Contact
working hours
