Festo MHJ10-S-0,35-QS-4-MF solenoid valves

Germany brand Festo model MHJ10-S-0, 35-QS-4-MF solenoid valves, high-speed valves MHJ, directly controlled poppet valves; The same basic valve can be installed directly or with a manifold Single valve with integrated QS threaded fitting; Switching frequency up to 1000 Hz; Service life > 5 billion switches; Excellent repeatability.

Festo MHJ10-S-0, 35-QS-4-MF

Valve function 2/2-way, normally closed, monostable

Description of the input current 0.09-0.44 mA, trigger signal 3-15 V linear rise / 0.44-15.44 mA, trigger signal 15-30 V

Input resistance 34 kOhm

Drive mode: Electrically controlled

Width 10 mm

Standard nominal flow rate 100 l/min

Working port QS-4

Operating voltage 24 V DC

Operating pressure 0.5 bar ... 6 bar

Design Poppet valve, without spring return

Return Type: Pneumatic spring

Grid size 10.5 mm

Short model code MHJ10

Operating Instructions Do not operate without drafts. The stationary power supply must be able to ensure a minimum current of 1.7 A without voltage drops, and the module must be installed with a maximum ambient temperature of 45°C with flow.

b value 0.38

C value 0.4 l/sbar

Maximum switching frequency 1000 Hz

The product is open at 4 bar and 24 V in new condition with an opening time of 0.8 ms

The product is in new condition with a shutdown time of 0.4 ms at 4 bar and 24 V

The product is open at 0.5 bar and 24 V in new condition with an opening time of 0.8 ms

Shutdown time of 0.5 ms at 0.5 bar and 24 V under new conditions

The product is open at 6 bar and 24 V in new condition with an opening time of 0.9 ms

The shutdown time at 6 bar and 24 V in the new state is 0.4 ms

Closing Time Tolerance +15%/-25%

Open Time Tolerance +/-15%

Operating voltage range DC 21.6 V ... 26.4 V

Continuous power-on rate 100%

Characteristic parameters of the coil 24 V Dc: 2.0 W for low current phase, 7.0 W for high current phase

Trigger signal voltage range DC 3 V ... 30 V

Permissible voltage fluctuation +/- 10 %

Corrosion Resistance Class CRC 2 - Medium Corrosion Resistance

Storage temperature -20 °C ... 50 °C

Permissible solenoid surface temperature 120 °C

Medium temperature -5 °C ... 60 °C

Ambient temperature -5 °C ... 60 °C

Product weight 50 g

Cable length 0.35 m

Screw Material: Steel

MHJ10: Manifold integrated mounting valve with single output

MHJ10: Electrically connected via a one-piece cable, with control electronics built into the valve

We have been pursuing high-quality service and high-quality products, giving us a time to create surprises and give you a pleasant shopping experience; Give us a chance to cooperate, and give you a win-win situation; 76 Technology looks forward to cooperating with you, and 76 Technology hopes to create a win-win situation with you.

Festo MHJ10-S-0,35-QS-4-MF solenoid valves

Sections viewed

Contact

working hours