Fanuc Palletizing Industrial Robot M-420iA with a payload of 40KG and an arm span of 1855mm

The FANUC Robot M-1iA is a lightweight, compact, high-speed fist robot. ●The lightweight, compact mechanism can be installed not only in confined spaces, but also at any angle of inclination. ●Depending on the application, you can choose the appropriate degree of wrist freedom and movement ...

The FANUC Robot M-20IB is a medium-sized handling robot with a handling weight of 25-35 kg. ● Corresponding to different uses, there are three types to choose from. - FANUC Robot M-20iB/25 A general-purpose robot that can perform high-speed movements. It can be used for handling, assembly, ...

The FANUC Robot R-10001A is a small, high-speed robot with a handling weight of 80-130 kg. It has a compact robot structure and excellent operation performance, and can cope with a variety of operations such as dense layout, such as handling, spot welding, and palletizing and stacking. ●You can choose from 4 models depending on your application.

The FANUC Robot CR-4iA, 7iA, 7iA/L, 14iA/L is a small cobot about the size of a human arm. ●You can choose from 4 types of models with different transportable qualities and reachable radii to suit your needs. ●It can be lifted by ...

The M-900iA/200P is highly resistant to the environment, and can be used safely in harsh environments. Load: 200.0 Kg. Number of control axes: 6 Achievable radius: 3507 mm. Robot mass: 2670kg Repeat positioning accuracy: ±0.30mm Main applications: spot welding, palletizing, assembly ...

The FANUC Robot M-10iAM-20iA is a small handling robot with a handling mass of 7-35 kg. There are hollow wrist models that allow users to handle cables easily and conveniently, and models with high permissible moment of inertia that can handle large workpieces. It can be based on ...

The FANUC Robot M-10iD / M-20ID is a small intelligent robot with built-in cables. The unique gear drive mechanism realizes the motion characteristics of high moment of inertia, and the robot arm cable is built-in. The J1 shaft hollow structure enables the wiring of external cable conduits. Job Tool Control ...

The FANUC Robot M-10iAM-20iA is a small handling robot with a handling mass of 7-35 kg. There are hollow wrist models that allow users to handle cables easily and conveniently, and models with high permissible moment of inertia that can handle large workpieces. It can be based on ...

FANUC Robot R-2000iC/165F embodies FANUC's years of experience and technology, and is a universal intelligent robot with high reliability and excellent cost performance. We can contribute to various applications such as spot welding, handling, and assembly. Realize the lightness of the robot mechanism department.

The LR Mate 200iD is a miniature robot about the size of a human arm. Because its arm is slim, even if it is installed in a small space, the possibility of collision between the robot arm and the surrounding equipment can be minimized. It can be done from the standard ...

Introduction: Fanuc/FANUC Industrial Robot CRX-10iA Product parameters Number of shafts: 6 Wrist payload: 10 kg Working range (X, Y): 1240mm, 2480mm (up to the tip of the flange) Position repeatability: ±0.04 mm ...

The FANUC Robot M-1iA is a lightweight, compact, high-speed fist robot. ●The lightweight, compact mechanism can be installed not only in confined spaces, but also at any angle of inclination. ●Depending on the application, you can choose the appropriate degree of wrist freedom and movement ...

Fanuc Fanuc Spraying Robot M-10iA/10M Reachable radius: 1422mm Repeatability: ±0.03mm The above content is about Fanuc/FANUC M-10iA series product introduction, if you have any questions or product needs, please feel free to communicate with our customer service.

Specialty The FANUC Robot M-710iC is a medium-sized handling robot that can handle a mass of 12kg to 70kg. ●The following 8 models are available depending on the application: . FANUC Robot M-710iC/45M, /50, 1/70 It has a wide range of motion and a large wrist load capacity.

Fanuc CRX collaborative robot series products occupy a small area, the working space is not restricted, the repeated positioning accuracy is high, and the installation mode is free, among which CRX-201A/L, CRX-251A has become the largest palletizing application in many industries such as food, medicine, household daily chemical and so on by virtue of its high load and large reach.

The FANUC Robot M-3iA is a large-scale, high-speed parallel linkage robot for handling and assembly. As a parallel robot, it has a 6-axis model with a unique structure, which expands the scope of application in logistics and assembly lines. There are 3 types of models depending on the application.

The FANUC Robot R-10001A is a small, high-speed robot with a handling weight of 80-130 kg. It has a compact robot structure and excellent operation performance, and can cope with a variety of operations such as dense layout, such as handling, spot welding, and palletizing and stacking. ●You can choose from 4 models depending on your application.

The FANUC Robot M-2iA is a medium-sized parallel linkage robot for high-speed handling and assembly. ●There are 6 models to choose from depending on the degree of freedom of the wrist and the range of motion. - FANUC Robot M-2iA/3A， M-2iA/3AL The wrist adopts a 3-axis rotation structure, which is suitable for ...

Product Introduction FANUC Arc Welding Industrial Robot R-2000iB/F210 Load 210kg Working radius 2655mm Fanuc grinding industrial robot Fanuc loading and unloading industrial robot Fanuc palletizing industrial robot Fanuc spot welding industrial machine ...

Product Introduction FANUC Heavy Duty Handling Industrial Robot M-900iA/600 with 600kg load and working radius 2832mm Fanuc Handling Industrial Robot Fanuc Loading and Unloading Industrial Robot Fanuc Palletizing Industrial Robot Industry...