Fanuc/FANUC Teach Pendant Cable A660-2007-T364#T Number of Cores 16
Create Date: 2024-8-30 12:03:23|Source: FANUC/Fanuc
  • Brand:
    Fanuc/FANUC
    Origin:
    Japan
    Price:
    Please contact customer service
    Delivery time:
    Please contact customer service
    Model:
    A660-2007-T364#T
    Product Introduction
    Fanuc/FANUC Robot Teach Pendant Cable A660-2007-T364#T
    Length: 10.5/12.5/20.5m
    Customization: No
    quality assurance

    quality assurance

     Attentive service

    Attentive service

     Secure transactions

    Secure transactions
Product Description
Details of the product

　　Brand: Fanuc.

　　Model: A660-2007-T364#T.


Fanuc / FANUCA660-2007-T364#T


　　Core material: tinned copper wire.

　　Number of cores: 16.

　　Sheath material: silicone rubber.

　　Length: 10.5/12.5/20.5m.

　　Customization: No.

　　Uses: Industrial robots.

　　The detailed process of cable replacement.

　　1. Before installing the cable, install and fix it in the marked position of the cable, including nylon protective tape, cable protective sleeve, etc.

　　2. Insert the cable from the 2nd arm side and introduce the 1st axis base side at the same time.

　　3. After installing the 2-axis arm cover, thread the 3-axis jacket into the cable.

　　4. Install the junction box on a part of the wiring board of the three-axis jacket.

　　5. Connect the motor junction box with 3-6 shafts.

　　6. Insert the upper part of the 1-axis base tube into the cable and extend it from the lower part.

　　7. Tie it tightly with nylon tape and fix it on the fixing plate in the base of the J1 axis.

　　8. Fix the cable of the 1-axis base with a fixing plate.

　　9. Connect the 1-axis/2-axis motor cable.

　　10. Connect the wire box on the distribution board on the side of the 1-axis base for installation.

　　11. Connect the battery box wiring on the opposite side of the 1-axis base.

　　12. Install the ground wire.

　　13. In order to facilitate the wire into the control panel, first sort out the wiring end and wrap it with tape.

　　14. Start wiring and install the connector cover on the inside.

　　15. Plug in the internal cable gland.

　　16. Install the balancing device.

　　17. After recovery, remove the suspension pulley that hangs the J3 axis and J4 axis. Install R/B components. Includes adapter box, ATC, and external piping/wiring.

　　18. Finally, the zero point calibration is reset. Test run.

　　The company takes quality first, customer first, integrity-based, advocates the concept of harmonious cooperation and development and cooperates with many customers in good faith.

　　Create quality with quality! Win the future with integrity! Touching people with professionalism! Impress customers with service!

More on that
Fanuc/FANUC encoder signal cable A860-2020-T301 Fanuc/FANUC encoder signal cable A860-2020-T301

Fanuc Fanuc Original Motor Encoder A860-2020-T301 A860-2020-T321 Control mode: Power supply Applicable Industries CNC Applicable equipment: Machine tools Degree of automation: Fully automated Control the output PNP Protection: Disc contact protection The above is all about ...
Fanuc/FANUC PLC control system A61L-0001-0073 Weight: 0.5kg Fanuc/FANUC PLC control system A61L-0001-0073 Weight: 0.5kg

Product Details Brand: Fanuc Model: A61L-0001-0073 Usage: Handling robots Control mode: programmable control robot Drive mode: electric Installation: fixed installation on the ground Manipulator sits ...
Fanuc/FANUC Key Film A98L-0001-0518#T Weight: 0.1kg Fanuc/FANUC Key Film A98L-0001-0518#T Weight: 0.1kg

Product Details Product Name: Key Film Brand: Fanuc/Fanuc Model: A98L-0001-0518#T Classification of CNC machine tools: other CNC machine tools Movement mode: point control Number of knives: 8 Control mode: open loop ...
Fanuc/FANUC Accessories A20B-2100-0540 Servo Drive Original Side Panel Fanuc/FANUC Accessories A20B-2100-0540 Servo Drive Original Side Panel

Product parameters Customization: No Catalog number: A20B-2100-0540 Brand: Fanuc Model: A20B-2100-0540 Mechanical rigidity: Flexible Number of layers: single-sided Base material: Aluminum Insulation material: organic resin Insulation thickness: thin board Flame retardant properties ...
Fanuc A16B-0160-0280-R P.C.B circuit board Fanuc A16B-0160-0280-R P.C.B circuit board

　　Product Description Fanuc A16B-0160-0280-R P.C.B circuit board Brand: Fanuc/Fanuc Model: A16B-0160-0280-R Surface process: Upper rosin board Substrate type: single-sided Base...
Fanuc A06B-6110-H006 Servo Driver AC 200V input Fanuc A06B-6110-H006 Servo Driver AC 200V input

　　Product Introduction: 　　Japan brand FANUC/Fanuc model number is A06B-6110-H006, product type is servo drive input voltage AC (alternating current) 200V. Brand: Fanuc/Fanuc 　　Origin: Japan 　　Model:A06B-6 ...
Fanuc machining centers α-D14MiB & α-D21MiB Fanuc machining centers α-D14MiB & α-D21MiB

Introduction: Born in the 70s of the last century, Fanuc ROBODRILL small machining center, BT30 small machining center sales leading. In addition to drilling and tapping, milling and boring can also be carried out, and it is widely used in machinery, auto parts, IT precision parts, precision molds...
Fanuc A06B-0062-B503 Servo Motor Fanuc A06B-0062-B503 Servo Motor

Fanuc A06B-0062-B503 servo motor, output 0.5kw input 319V frequency 267Hz Fanuc A06B-0062-B503 Servo Motor Brand name: Fanuc Model: A06B-0062-B103 Output...
Fanuc/FANUC spindle external encoder data cable A06B-6078-K814 Fanuc/FANUC spindle external encoder data cable A06B-6078-K814

Product Details Brand Name: Fanuc / FANUC Model: A06B-6078-K814 Core material: tinned copper wire Number of cores: 10 Application: Connect to Fanuc encoder Sheath material :P VC Maximum outer diameter of wire: 6.7mm ...
Fanuc A06B-0114-B275 servo motor rated power 0.13kW Fanuc A06B-0114-B275 servo motor rated power 0.13kW

　Product Description Fanuc A06B-0114-B275#0008 Servo motor, power supply voltage 31 V rated current 2.7A output speed 4000 rpm Fanuc A06B-0114-B275#0008 Servo Motor Brand Name: Hair ...
Fanuc A20B-1001-0882 PCB RAM/512KB Fanuc A20B-1001-0882 PCB RAM/512KB

　　Product description:Fanuc/Fanuc A20B-1001-0882 PCB board Japan brand 　　Brand: FANUC Place of Origin: Japan Model: A20B-1001-0882 Type: PCB Board RAM capacity: 512KB Drive element type: Electromechanical Control ...
Fanuc/FANUC spare parts A20B-3900-0281/02A Fanuc/FANUC spare parts A20B-3900-0281/02A

Fanuc/FANUC spare parts A20B-3900-0281/02A FROM card A20B-3900-0281/02A The above content is about Fanuc/FANUC spare parts A20B-3900-0281/02A product introduction, if you have any questions or product needs, please feel free to communicate with our customer service, ...
Fanuc/FANUC AC Spindle Drive Positioning Card A20B-0008-0240 PCB Board Fanuc/FANUC AC Spindle Drive Positioning Card A20B-0008-0240 PCB Board

Fanuc / FANUCA20B-0008-0240 Detailed description At present, the mainstream servo drives are based on digital signal processors (DSPs) as the control core. It is possible to achieve more complex ...
Fanuc A03B-0801-C101 I/F Servo Drive Fanuc A03B-0801-C101 I/F Servo Drive

　　Product Description Fanuc A03B-0801-C101 control module, working voltage 35-240V, power 25-70HZ 11mm, ambient temperature 25-50°C, weight 2-5kg Fanuc A03B-0801-C101 Control Module ...
Fanuc A16B-1600-0661 PCB Nominal voltage 380 volts Fanuc A16B-1600-0661 PCB Nominal voltage 380 volts

Fanuc A16B-1600-0661 Fanuc FANUC circuit board. Trademark: Fanuc/Fanuc Model: A16B-1600-0661. Role: Position servo. Transmission component type: electromechanical. Working mode: closed loop. Power supply: 150kw ...
Fanuc A06B-0205-B100 Servo Motor Fanuc A06B-0205-B100 Servo Motor

Fanuc A06B-0205-B100 servo motor has smooth rotation characteristics, excellent acceleration ability and high reliability, and can achieve high-precision positioning and control with built-in encoders Fanuc A06B-0205-B100 Servo Motor ...
Fanuc A20B-1004-0640 Accessories LCD Adapter Fanuc A20B-1004-0640 Accessories LCD Adapter

Fanuc A20B-1004-0640 LCD Adapter Brand: Fanuc/Fanuc Origin: Japan Model: A20B-1004-0640 Type: LCD Adapter Structural form: integral Function: Automatic control Operating voltage: 220V/380V Customization: No Seventy-six ...
Fanuc A66L-6001-0023#L2R003 Fiber Optic Patch Cord Fanuc A66L-6001-0023#L2R003 Fiber Optic Patch Cord

Fanuc FANUC spare parts sales 0i-MA oi-TA 0i-TB 0i-MB 0iMate-TB 0iMate-MB 0i-TC | 0i-MC 0iMate-TC OiMate-MC 0i-TD 0i-MD 0iMate-TD 0iMate-MD FANUC Fanuc System Fanuc servo drive Fanuc servo amplification ...
Fanuc A06B-6200-H037 Servo Driver Rated voltage 220V Fanuc A06B-6200-H037 Servo Driver Rated voltage 220V

　　Product Description Fanuc A06B-0123-B075 Servo Driver, Output 0.5kw Input 319V Frequency 267Hz Fanuc A06B-0123-B075 Servo Drive Brand name: Fanuc Give birth...
Fanuc A06B-6134-H301#A VPM3-5.5I Servo Driver Fanuc A06B-6134-H301#A VPM3-5.5I Servo Driver

brand Fanuc Origin Germany specification 19.20 x 23.90 x 2.50 Scope of use Industrial automation Output frequency 10-6000Hz Operating voltage 24V Rated voltage 120-230V Current rating 10mA Contact form touch LD Instruction Processor Hard PLC Installation...
CATEGORIES BYPASS

Brand Home

Fanuc products

Fanuc Information

Customer Service Center

Online Consultation:QQ

ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

 Contact number QQ consultation
QQ consultation

3271883383

 Company address

Wuhan 76 Technology Co., Ltd |Customer Service Hotline: 13522565663|Email:ronglove999@outlook.com

All products on this site are from the official website or the Internet, because there are too many types, only part of it is sent as an example! If there is any violation, please contact to delete!

Back to top