|
Eaton Relay Overload ZB65 10-16A Trip Class 10A
ZB65 Product Introduction: These relays are suitable for use with DILM contactors DILM40 to DILM65 Installed under DILM 40 to DILM65 contactors Provide short circuit protection for electric motors When installing overload relays away from the contactor or when using multiple overload relays
|
|
Eaton Thermal Overload Relay 8TT91SDRS contact current rating 10.4 A
Product Brief for the 8TT91SDRS: This series of overload relays is suitable for use with MEM Eaton package starters. FLC Motor Rating 6.9 → 10.4 A Contact Current Rating 10.4 A Mounting Style Direct Contactor Series ADS8 Normal ...
|
|
Eaton Relay Control DILER-40 230V 4 NO
Product Brief for DILER-40: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W X D58 x 45 x 52 mm.
Eaton Relays:
Product Technical Parameters The above is EATON/Eaton Relay Control Type D ...
|
|
EATON Contactors & Thermal Overload Relays ZB32 Contacts with a rated voltage of 690 V AC
Product Brief for ZB32: Protects the motor from phase errors or overloads, provides short-circuit protection when connected directly to the contacts Suitable for the protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple contacts are used
|
|
EATON Contactors & Thermal Overload Relays ZB12-6 Contact Rated Current 6 A
Product brief for ZB12-6: Protects the motor from phase errors or overloads, provides short-circuit protection when connected directly to the contacts Suitable for the protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple connectors are used...
|
|
EATON Contactor Miniature Relay DILER-31-G 3NO 1NC, 24V
Product Brief for DILER-31-G: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W X D 58 x 45 x 52 mm.
Eaton UPS:
Product technical parameters
The above is EATON/Eaton contact ...
|
|
EATON Thermal Overload Relay 8TT90RS contact current rating 4 A
Product Brief for 8TT90RS: FLC Motor Rating 2.5 → 4 A Contact Current Rating 4 A Contact Voltage Rating 415 V ac Mounting Style Direct Contactor Series ADS8 Normal State Configuration Normally Open/Normally Closed Number of auxiliary contacts 1 Rated power 1.5 kW.
Eaton...
|
|
EATON Contactor Relay DILA-40 24V DC 4 Closed Contacts
Product Brief of DILA-40: Contact Rated Current 4 A Range xStart Contact Rated Voltage 400 V ac Series DILA Normal State Configuration 4 NO Number of Auxiliary Contacts 0 Terminal Type Screw Length 68mm Depth 117mm Width 45mm.
Eaton Relays:
...
|
|
EATON Contactor & Thermal Overload Relay ZB32-6 Contact Current Rating 6 A
Product Brief for ZB32-6: Protects the motor from phase errors or overloads Short-circuit protection when connected directly to contacts Suitable for protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not directly mounted on the contactor or when using multiple...
|
|
EATON Contactor Relay DILA-40 24V AC, 4 closed contacts
Product Brief of DILA-40: Number of Auxiliary Contacts 0 Terminal Type Screws Length 45mm Depth 125.2mm Width 68mm Maximum Operating Temperature +60°C Minimum Operating Temperature -25°C.
Eaton Relays:
Product Technical Parameters The above is EATON/Eaton Contactor Following ...
|
|
EATON Thermal Overload Relay 8TT94 Contact Rated 18 A
Product introduction of 8TT94: Contact current rating 18 A, 13 → 18 A direct contactor, contact voltage rating 415 V AC ADS8 series 105.8mm auto 1, 9 kW + 60°C NO / NC.
Eaton Relays:
Product technical parameters
The above is EATON/Eaton hot ...
|
|
EATON Contactors & Thermal Overload Relays DILER-22 110ACV
Product Brief for DILER-22: AC or DC control coil only 10A rated contacts with protection Surface Mount or DIN Rail Mount Maximum Voltage Rating 500 V AC/250 V DC Dimensions: H x W x D 58 x 45 x 52 mm.
Eaton Relays:
...
|
|
EATON 7A AC Contactor Relay DILM7-10C(220-230V50HZ)
DILM7-10C Product Introduction: Same form factor for AC and DC operation simplifies design Contactors of 32A and below can be controlled directly by the PLC, thus reducing the number of intermediate relays With extremely low heat dissipation, the control cabinet can allow for higher mounting densities
EATO ...
|
|
EATON Relay Overload ZB65 40-57A Trip Class 10A
Product Brief of ZB65: FLC Motor Rating 40 → 57 A Control Voltage 500 V AC Contact Rated Current 57 A Contact Rated Voltage 690 V AC Mounting Style Direct Contactor Series ZB65 Normal State Configuration NO/NC Auxiliary Contact ...
|
|
Eaton Relay Overload Controller DILER-31 230V, 3 NO
Product Brief for DILER-31: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W x D 58 x 45 x 52 mm.
Eaton Relays:
Product Technical Parameters The above is EATON/Eaton relay overload control ...
|
|
EATON Contactors & Thermal Overload Relays ZB150-125 95A - 125A
Product Brief of ZB150-125: FLC Motor Rating 95 → 125 A Control Voltage 500 V ac Contact Rated Current 125 A Contact Rated Voltage 1 kV AC Mounting Style Direct Contactor Series ZB Normal State Configuration NO/NC Number of Auxiliary Contacts 2 Rated ...
|
|
The ETR4-11-W relay is compact and saves volume in the control cabinet
Product introduction of ETR4-11-W: Fully functional, up to 9 functions and 10 time setting ranges Simple installation and set-up, accuracy up to one hundredth of a second Compact size saves volume in the control cabinet
EATON Relays:
Features & Functions:
...
|
|
EATON Contactors & Thermal Overload Relays XTOMP40AC1 Contacts are rated at 10 A
XTOMP40AC1 Product Brief: Eaton's Cutler-Hammer XT Miniature Overload Relays feature non-reverse and reverse miniature contactors, miniature overload relays, and snap-on attachments. XT Series Miniature Overload Relays with Compact Design, Economical and Eco-Friendly Compact Design Phase ...
|
|
EATON Thermal Overload Relay 8TT91RS Contact Current Rating 6 A,
Product Brief for the 8TT91RS: This series of overload relays is suitable for use with MEM Eaton package starters. Rated power 2.2 kW Reset method Automatic Width 105.8mm Depth 96.9mm Length 159.4mm Maximum operating temperature +60°C Operating temperature
|
|
EATON Contactors & Thermal Overload Relays DILA-40 4 Closed Contacts
Product Brief of DILA-40: Normal State Configuration 4 NO Number of Auxiliary Contacts 0 End Type Screw Length 45mm.
Eaton Relays:
Product technical parameters
The above products are EATON Contactors and Thermal Overload Relays DILA-40 ...
|
Contact
working hours
