Product Brief for DS7-342SX055N0-N:The ramp time can be adjusted by potentiometer in the range of 1 to 30 s (start) or 0 to 30 s (stop).The starting voltage (or starting torque) can be adjusted by a potentiometer within 30 to 100% of the supply voltage Specially designed for long cable lengths
EATON/Eaton Soft Starter:
Product Overview:
The DS7 series soft starter is a 2-phase controllable soft starter for soft-start 3-phase AC motors.
Suitable for applications with normal operating frequencies and current ranges from 3 to 200A (1.1 to 110kW, 400V supply voltage).
Closed transients and DC components can be effectively suppressed during start-up, and motor start-up can be ensured.
Product Features:
The ramp time can be adjusted by potentiometer in the range of 1 to 30 s (start) or 0 to 30 s (stop).
The starting voltage (or starting torque) can be adjusted by a potentiometer within 30 to 100% of the supply voltage.
The turn-on current is greatly reduced, resulting in a short soft-start ramp time (min. 1s) for lighting and heating loads.
Internal bypass relay: Automatically turns on at the end of the ramp and bypasses the internal semiconductor thyristor.
Ensure compliance with Wireless Interference Level B regulations without taking any additional action.
The thermal load of the motor is less than if asymmetrical ignition control is not used.
Specially designed for long cable lengths.
Applications:
Pump drive: Pressure fluctuations are prevented by soft starting.
Fan Drive: Soft start prevents the fan strip from slipping to prevent premature wear.
Conveyor belt: The conveyor belt starts smoothly instead of wobbly.
The above is the product brief of EATON Soft Starter DS7-342SX055N0-N, which is as follows: The ramp time can be adjusted by potentiometer in the range of 1 to 30 seconds (start) or 0 to 30 seconds (stop). The starting voltage (or starting torque) can be adjusted by a potentiometer to within 30 to 100% of the supply voltage Specially designed for long cable lengths. The purpose of 76 Technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
EATON Soft Starter DS7-342SX004N0-N
The DS7-342SX004N0-N features heavy-duty capacity, precise pump algorithms, and advanced monitoring and protection features. Optimized menus facilitate user programming, installation, setup, maintenance and monitoring of parameters, power and power factor measurements
ATON/Eaton Soft Start ...
|
|
EATON soft starter S801N37N3S overheating 110 degrees Celsius reverse-adjustable
Product introduction of S801N37N3S: Excessive heat 110 degrees Celsius reverse adjustable Hit 15g Soft stop 0-60 seconds Shake 3g
EATON Soft Starter:
The product introduction of the above product EATON/Eaton soft starter S801N37N3S, this product introduction is: ...
|
|
EATON soft starter S811+R10P3S rated operating voltage: 43V
Product introduction of S811+R10P3S: Rated working voltage: 43V Rated current: 34A Rated working current: 56A Applicable motor: 67 Operating temperature range: 89°C Rated voltage: 23V
EATON Soft Starter:
Parameter:
Brand:...
|
|
Eaton soft starter DS7-340SX070N0-L
Product Introduction of DS7-340SX070N0-L:DS7 series soft starter is a 2-phase controllable soft starter for soft-start 3-phase AC motors. Suitable for applications with normal operating frequencies and current ranges from 3 to 200A (1.1 to 110kW, 400V supply voltage). Closure can be effectively suppressed during start-up ...
|
|
EATON soft starter DS7-340SX100N0-N
Product introduction of DS7-340SX100N0-N: The DS7 series soft starter is a 2-phase controllable soft starter for soft-start 3-phase AC motors. Suitable for applications with normal operating frequencies and current ranges from 3 to 200A (1.1 to 110kW, 400V supply voltage). It can effectively inhibit the closure ...
|
|
EATON Soft Starter DS7-340SX024N0-N
Product Introduction of DS7-340SX024N0-N: DS7 series soft starter is a 2-phase controllable soft starter for soft-start 3-phase AC motors. Suitable for applications with normal operating frequencies and current ranges from 3 to 200A (1.1 to 110kW, 400V supply voltage). Closure can be effectively suppressed during start-up ...
|
|
EATON Soft Starter DS7-342SX070N0-N
DS7-342SX070N0-N Product Introduction: Versatile, easy to install and program, capable of controlling motors up to 1000A, built-in overload protection (ranging from 12A-1000A) and running bypass contactors make installation and setup quick and easy.
EATON/Eaton ...
|
|
EATON Universal Soft Starter DS6-340-75K-MX
DS6-340-75K-MX product introduction: According to the characteristics of the motor load, various parameters in the starting process can be adjusted, such as current limiting value, starting time, etc.
EATON/Eaton Soft Starter:
Product Details:
Product...
|
|
Contact
working hours
