MEAN WELL/Meanwell_HSP-75 single output switching power supply _PFC calibration

HSP-75 Introduction: Built-in PFC correction function, PF>0.93, 100% full load burn-in test, built-in constant output current limiting circuit, with LED power on and off indication function, PFC working frequency 67KHz, PWM working frequency 134KHz, features: global applicable AC input power supply, protection characteristics: short circuit/overload/overvoltage.

MEAN WELL/Meanwell_HSP-75 single output switching power supply _PFC calibration

Model		HSP-75-3.3	HSP-75-5	HSP-75-7.5	HSP-75-12	HSP-75-13.5	HSP-75-15	HSP-75-24	HSP-75-27	HSP-75-48
Lose	DC output voltage	3.3V	5V	7.5V	12V	13.5V	15V	24V	27V	48V
	Output voltage tolerance	±2%	±2%	±2%	±2%	±2%	±2%	±1%	±1%	±1%
	Rated output current	15A	15A	10A	6.3A	5.6A	5A	3.2A	2.8A	1.6A
	Output current range	0-15A	0-15A	0-10A	0-6.3A	0-5.6A	0-5A	0-3.2A	0-2.8A	0-1.6A
	Output power	49.5W	75W	75W	75.6W	75.6W	75W	76.8W	75.6W	76.8W
	Ripple and noise	80mVp-p	80mVp-p	80mVp-p	80mVp-p	80mVp-p	80mVp-p	100mVp-p	100mVp-p	100mVp-p
	DC voltage adjustable range	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%,+10%
	Start, rise, hold time	600ms, 60ms, 20ms full load
Input	Input voltage range	85～264 VAC47-63Hz；120～370VDC
	Factor	PF>0.93/230VAC, PF>0.96/115VAC full load
	AC input current	1.3A/115 VAC0.7A/230VAC
	efficiency	68%	72%	74%	77%	78%	79%	80%	80%	80%
	Inrush current	Cold start current 40A/230VAC
	Leakage current	<2mA/240VAC
Protection	Overload protection	105%~150%
special	Overload protection	Protection mode: constant current limit, automatic recovery
sex	Overvoltage protection	115%～135%
	Overvoltage protection	Protection mode: cut off the output and restart
can	Remote control	CN3: 4 ~ 10VDC shutdown, <0 ~ 0.8VDC shutdown
choose
merit
Yes
ring	Operating temperature, humidity	-10℃～+60℃；20%～90 %RH
border	Store at temperature and humidity	-20℃～+85℃；10%～95 %RH
	Earthquake resistance	10~500Hz, 2G 10min./1 cycle, duration 60 minutes, each axis
quiet	Pressure resistance	Input and output room: 3KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC
whole	Insulation resistance	Input/output room, input and ground, output and ground: 100M Ohms/500VDC
symbol	Safety standards	UL1950, TUV EN60950 compliant
combine
sign
permit	EMC standards	EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024
that	weight	0.58Kg
it	wrap	20pcs/12.0Kg/0.64CUFT
prepare	1. All parameters are measured at 230VAC input, rated load and 25°C unless otherwise specified.
concentrate	2. Ripple and noise voltages are measured with 0.1μ and 47μ capacitors at the end of a 20MHz bandwidth oscilloscope with a 12-inch twisted pair.
	3. Tolerance is the sum of voltage setting error, voltage regulation, and current regulation.
	4. This power supply is considered to be installed as a device on the final equipment, and the equipment must reconfirm its EMC index.

　　The above is Meanwell/Meanwell HSP-75 single output switching power supply, the product has built-in PFC correction function, PF>0.93, 100% full load burn-in test, built-in constant output current limiting circuit, with LED power on and off indication function, PFC working frequency 67KHz, PWM working frequency 134KHz, features: global applicable AC input power supply, protection characteristics: short circuit/overload/overvoltage. Our company adheres to the needs of customers, which is our pursuit, and the pursuit of quality is our responsibility. You can rest assured that you can inquire and purchase, if it meets your needs, please come to consult.

MEAN WELL/Meanwell_HSP-75 single output switching power supply _PFC calibration

Sections viewed

Contact

working hours