Germany Siemens/Siemens 6EP1332-5BA10 compact power supply unit

6EP1332-5BA10 Introduction: Siemens DIN rail power supply, SITOP PSU100C series, rated power 96W, 4A output 120 → 230V ac

Germany Siemens/Siemens 6EP1332-5BA10 picture display

Model features introduced

SITOP compact power supply units
The single-phase SITOP compact series is used for power supplies in the lower performance range. Thanks to their space-saving, slim design, they are particularly suitable for power distribution applications in control boxes or small control cabinets. The SITOP compact series offers low power losses over the entire load range. Low losses even during standby mean they are ideal for applications that are often in standby mode. This SITOPPSU100C power supply has a wide range of inputs for both AC and DC networks; Plug-in terminal blocks facilitate electrical connections.

Features and Benefits:

Single-phase wide-range input: 85V AC to 264V AC or 110V DC to 300V DC

The slim design provides a small mounting surface

Full range of high efficiency

Low power consumption during no-load operation or standby

Adjustable output voltage

Green LED to indicate "Output Voltage Normal"

Plug-in connection terminals for prefabricated wiring and quick electrical connections

Wide temperature range: -20°C to 70°C
Product application information
To increase availability, SITOP compact power supplies can be combined with DC UPS, redundancy and selectivity modules.

Why use a DIN rail power supply?
The flexibility of the DIN rail mounting system allows for faster installation and all devices can be easily snapped onto metal rails. The power supply can be easily and orderly placed on a DIN rail in an enclosed junction box or in a space-constrained area. Similar devices can be installed next to each other, reducing the amount of cabling required. Most power supplies are convection-cooled, so there is no need for a cooling fan. AC to DC DIN rail power supplies are widely used in a variety of automation, instrumentation, and industrial applications. They can power a wide range of DC devices, including sensors, motors, actuators, solenoid valves, relays, and more.

Factors to consider when buying a DIN rail power supply
DIN Rail Sizes – Three common DIN rails are available. Top caps, G-sections, and C-sections. Most have a depth of 7.5mm or 15mm. It is wise to check that your power supply is compatible with the DIN rail.

Type of protection – Always choose a power supply that protects against short circuits, overloads, overtemperatures, or overvoltages. Some power supplies also offer a start-up pause mode, which allows the PSU to resume operation after clearing the fault.

Fixed or Adjustable Output Voltage or Current – In test systems, adjustable DC voltages are often employed, however, in other applications, a fixed DC power supply is critical.

Cabling and Wiring – The input/output lines connected to the power supply should be as short as possible and have a large cross-sectional area to help minimize noise and heat.

Efficiency – Choose a high-efficiency power supply that minimizes power dissipation, especially when the system is convection-cooled.

Input voltage range – If you purchase a DIN rail switching power supply for Europe and North America and the United Kingdom, you will need a universal AC input range of 80V AC to 264V AC.

Standard – If this power supply is intended for use in the United States to control electric motors, it needs to comply with standard UL508, which is a safety standard for industrial control equipment. Approved CE, cULus, cCSAus, CB, ATEX, cCSAus, Class I Div2, GL, ABSSiemens6EP1332-5BA10 power supply, 24V, 4A, 96W

Model parameters are introduced

attribute	numeric value
Input voltage	120→230V AC
Minimum input voltage	85V AC
Output voltage	24V DC
Maximum input voltage	264V AC
Minimum output voltage	24V DC
Maximum output voltage	24V DC
Output current	4A
Rated power	96W
Number of outputs	1
Potentiometric phase	1
type	Switch mode
range	SITOP
height	80mm
size	100x52.5x80mm
width	52.5mm
Maximum temperature	+70°C
weight	320g
Installation type	DIN rails
Output voltage adjustment range	22.2→26.4V
Minimum temperature	-20°C
series	SITOPPSU100C
Load regulation	0.2%
Ripple and noise	200mV peak-to-peak
depth	80mm
Hazardous area certification	ATEX

The above content is about Germany Siemens / Siemens 6EP1332-5BA10 product introduction, if you have any questions or product needs, welcome to communicate with our customer service consultation, all products of 76 technology are genuine, false one pays ten, are manufacturers or selected first-class agent sources, the quotation is real, the price is beautiful.

Survive by quality, develop by reputation, eternity by service, give us a chance, and give you a surprise.

Germany Siemens/Siemens 6EP1332-5BA10 compact power supply unit

Sections viewed

Contact

working hours