Germany Siemens/Siemens 6EP1334-3BA10-8AB0 DIN rail power supply 10A output

6EP1334-3BA10-8AB0 Introduction: Siemens DIN rail power supply, SITOP PSU200M series, rated power 240W, 10A output

Germany Siemens/Siemens 6EP1334-3BA10-8AB0 picture display

Model features introduced

SITOP modular power supplies
The 1-, 2- and 3-phase SITOP modular units are technical power supplies for demanding solutions. They provide maximum functionality and are used in complex equipment and machines. The wide range of inputs allows it to be connected to almost any power system in the world. The inputs ensure a high level of safety, even in the presence of large voltage fluctuations. They have excellent overload characteristics: they are powerful and can deliver up to three times the rated current for short periods of time. With 150% additional power, high-power loads can be easily connected. If there is an overload, you can choose between constant current or automatic restart. The high efficiency keeps energy consumption and heat build-up in the control cabinet to a minimum, and the compact metal housing saves space.

Features and Benefits:

Slim design

3 times rated current power enhancement for trip protection equipment

1.5 times the rated current extra power for brief functional overloads

Selectable short-circuit response between constant current and restart

Symmetrical load distribution can be selected for parallel operation

3 LEDs show the working status

Up to 94% efficiency

Temperature range: 25°C to 70°C
Product application information
To increase 24V availability, SITOP intelligent power supplies can be combined with buffers, DC UPS, redundancy and selectivity modules.

Why use a DIN rail power supply?
The flexibility of the DIN rail mounting system allows for faster installation and all devices can be easily snapped onto metal rails. The power supply can be easily and orderly placed on a DIN rail in an enclosed junction box or in a space-constrained area. Similar devices can be installed next to each other, reducing the amount of cabling required. Most power supplies are convection-cooled, so there is no need for a cooling fan. DIN rail AC-DC power supplies are widely used in a wide variety of automation, instrumentation, and industrial applications. They are used to power a wide range of DC operating equipment, including sensors, motors, actuators, solenoids, and relays.

Points to consider when buying a DIN rail power supply
DIN Rail Sizes – Three common DIN rails are available. Top caps, G-sections, and C-sections. Most have a depth of 7.5mm or 15mm. It is wise to check that your power supply is compatible with the DIN rail.

Type of Protection - It is important to choose a power supply that will protect against short circuits, overloads, overtemperatures, or overvoltages. Some power supplies also offer a start-up pause mode, which allows the PSU to resume operation after clearing the fault.

Fixed or Adjustable Output Voltage or Current – In test systems, adjustable DC voltages are often employed, however, in other applications, a fixed DC power supply is critical.

Cabling and Wiring – The input/output lines connected to the power supply should be as short as possible and have a large cross-sectional area to help minimize noise and heat.

Efficiency - Choose an efficient power supply that minimizes heat dissipation, especially if the system relies on convection cooling.

Input voltage range – If you purchase a DIN rail switching power supply for Europe and North America and the United Kingdom, you will need a universal AC input range of 80V AC to 264V AC.

Standard – If this power supply is intended for use in the United States to control electric motors, it needs to comply with standard UL508, which is a safety standard for industrial control equipment.

Power Enhancement Ratings:
443-0326	15A
443-0304	30A
451-7079	60A
714-1287	60A
451-7063	120A

Approved CE, cULus, ATEX, IECEx, SEMIF47, GL, ABS

Model parameters are introduced

attribute	numeric value
Input voltage	120→230Vac,230→500Vac
Minimum input voltage	85V AC
Maximum input voltage	264V AC
Output voltage	24V DC
Minimum output voltage	24V DC
Maximum output voltage	24V DC
Output current	10A
Rated power	240W
Number of outputs	1
Potentiometric phase	1,2
type	Switch mode
range	SITOP
size	125x70x121mm
height	125mm
width	70mm
series	SITOPPSU200M
Ripple and noise	50mV peak-to-peak
Line regulation	0.1%
Load regulation	0.1%
weight	800g
Installation type	DIN rails
Output voltage adjustment range	24→28.8V
depth	121mm
Minimum temperature	-25°C
Maximum temperature	+70°C

The above content is about Germany Siemens / Siemens 6EP1334-3BA10-8AB0 product introduction, if you have any questions or product needs, welcome to communicate with our customer service consultation, all products of 76 technology are genuine, fake one pays ten, are manufacturers or selected first-class agent sources, the quotation is real, the price is beautiful.

Survive by quality, develop by reputation, eternity by service, give us a chance, and give you a surprise.

Germany Siemens/Siemens 6EP1334-3BA10-8AB0 DIN rail power supply 10A output

Sections viewed

Contact

working hours